Experimental Behavior of Reinforced Concrete Frames Filled with Reinforced Concrete Shear Walls
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Masonry and Concrete Structural Analysis · Seismic Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. terfaces Subjected to Shear: State-of-the Art Review,” Construction and Building Materials, V. 306, 2021, p. 124855. doi: 10.1016/j.conbuildmat.2021.12485510.1016/j.conbuildmat.2021.124855 ↗
2. 2. Palieraki, V.; Vintzileou, E.; and Silva, J. F., “Interface Shear Strength under Monotonic and Cyclic Loading,” ACI Structural Journal, V. 119, No. 3, May 2022, pp. 17-28. doi: 10.14359/5173451910.14359/51734519 ↗
3. 3. EN 1992-1, “Eurocode 2: Design of Concrete Structures—Part 1-1: General Rules and Rules for Buildings,” European Committee for Standardization, Brussels, Belgium, 2004, 277 pp.
4. 4. EN 1998-1, “Eurocode 8: Design of Structures for Earthquake Resistance—Part 1: General Rules, Seismic Actions and Rules for Buildings,” European Committee for Standardization, Brussels, Belgium, 2004, 232 pp.
5. 5. EN 1998-3, “Eurocode 8: Design of Structures for Earthquake Resistance—Part 3: Assessment and Retrofitting of Buildings,” European Committee for Standardization, Brussels, Belgium, 2010, 201 pp.
6. 6. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318R-19) (Reapproved 2022),” American Concrete Institute, Farmington Hills, MI, 2019, 624 pp.
7. 7. fib, 2013, “fib Model Code for Concrete Structures 2010,” International Federation for Structural Concrete, Lausanne, Switzerland, 434 pp.10.1002/9783433604090 ↗
8. 8. Palieraki, V.; Vintzileou, E.; and Silva, J. F., “Modeling Reinforced Interfaces—Cold Joints Subjected to Cyclic Shear,” ACI Structural Journal, V. 119, No. 4, July 2022, pp. 225-238. doi: 10.14359/5173452110.14359/51734521 ↗
9. 9. Palieraki, V., “Seismic Behavior of Reinforced Interfaces in Repaired/ Strengthened Reinforced Concrete Elements,” PhD dissertation, National Technical University of Athens, Athens, Greece, 2014, 578 pp.
10. 10. Palieraki, V.; Zeris, C.; and Vintzileou, E., “Comparison of the Cyclic Shear Behavior of Roughened Reinforced Interfaces of Lightweight and Normalweight Concretes,” Proceedings of the 3rd International Symposium on Connections between Steel and Concrete, Stuttgart, Germany, 2017.
11. 11. Palieraki, V.; Vintzileou, E.; Piccinin, R.; and Genesio, G., “Behavior of Concrete Interfaces Crossed by Post-Installed Rebars,” Proceedings of the 4th Greek Conference on Antiseismic Mechanics and Seismic Technology, Athens, Greece, 2019.
12. 12. Vintzileou, E.; Genesio, G.; Oikonomopoulou, E.; and Palieraki, V., “Alternative Connectors for Seismic Interface Shear Applications,” Proceedings of the 17th World Conference on Earthquake Engineering, Sendai, Japan, 2021.
13. 13. Palieraki, V.; Vintzileou, E.; and Trezos, K., “Shear Transfer along Interfaces: Constitutive Laws,” Proceedings of the 2nd European Conference on Earthquake Engineering and Seismology, Istanbul, Turkey, 2014.
14. 14. Pulido, C.; Saiidi, M. S.; Sanders, D.; Itani, A.; and El-Azazy, S., “Seismic Performance of Two-Column Bents-Part II: Retrofit with Infill Walls,” ACI Structural Journal, V. 101, No. 5, Sept.-Oct. 2004, pp. 642-649.10.14359/13386 ↗
15. 15. Higashi, Y.; Endo, T.; Ohkubo, M.; and Shimizu, Y., “Experimental Study on Strengthening Reinforced Concrete Structure by Adding Shear Wall,” Proceedings of the 7th World Conference in Earthquake Engineering, Istanbul, Turkey, V. 7, 1980, pp. 173-180.
16. 16. Sugano, S., and Fujimura, M., “Aseismic Strengthening of Existing Reinforced Concrete Buildings,” Proceedings of the 7th World Conference in Earthquake Engineering, Istanbul, Turkey, 1980, pp. 449-456.
17. 17. Aoyama, H.; Kato, D.; Katsumata, H.; and Hosokawa, Y., “Strength and Behavior of Post Cast Shear Walls for Strengthening of Existing R/C Buildings,” Proceedings of the 8th World Conference on Earthquake Engineering, San Francisco, CA, V. 1, 1984, pp. 485-492.
18. 18. Anil, Ö., and Altin, S., “An Experimental Study on Reinforced Concrete Partially Infilled Frames,” Engineering Structures, V. 29, No. 3, 2007, pp. 449-460. doi: 10.1016/j.engstruct.2006.05.01110.1016/j.engstruct.2006.05.011 ↗
19. 19. Papatheocharis, T.; Perdikaris, P. C.; and Moretti, M. L., “Response of RC Frames Strengthened by RC Infill Walls: Experimental Study,” Journal of Structural Engineering, ASCE, V. 145, No. 11, Aug. 2019, p. 04019129. doi:10.1061/(ASCE)ST.1943-541X.000242510.1061/(ASCE)ST.1943-541X.0002425 ↗
20. 20. Koutselinis, V.; Papatheocharis, T.; and Perdikaris, P., “Experimental Investigation of RC Frame Strengthened with Wall of Low-Strength Concrete Under Cyclic Horizontal Loading,” Proceedings of the 5th Greek Conference of Earthquake Mechanics and Engineering Seismology, Athens, Greece, 2022.
21. 21. Moretti, M. L.; Papatheocharis, T.; and Perdikaris, P. C., “Design of Reinforced Concrete Infilled Frames,” Journal of Structural Engineering, ASCE, V. 140, No. 9, 2014, p. 04014062. 10.1061/(ASCE)ST.1943-541X.000104210.1061/(ASCE)ST.1943-541X.0001042 ↗
22. 22. Ohki, K., and Bessho, S., “Experimental Investigation on Aseismic Strengthening for Existing Reinforced Concrete Frames,” Proceedings of the 7th World Conference on Earthquake Engineering, Istanbul, Turkey, 1980, pp. 517-524.
23. 23. Teymur, P.; Yuksel, E.; and Pala, S., “Wet-Mixed Shotcrete Walls to Retrofit Low Ductile RC Frames,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, V. 146, 2008.
24. 24. Altin, S.; Ersoy, U.; and Tamkut, T., “Hysteretic Response of Reinforced-Concrete Infilled Frames,” Journal of Structural Engineering, ASCE, V. 118, No. 8, 1992, pp. 2133-2150. doi: 10.1061/(ASCE)0733-9445(1992)118:8(2133)10.1061/(ASCE)0733-9445(1992)118:8(2133) ↗
25. 25. Sonuvar, M. O.; Ozcebe, G.; and Ersoy, U., “Rehabilitation of Reinforced Concrete Frames with Reinforced Concrete Infills,” ACI Structural Journal, V. 101, No. 4, July-Aug. 2004, pp. 494-500. doi: 10.14359/1333510.14359/13335 ↗
26. 26. Kara, M. E., and Altin, S., “Behavior of Reinforced Concrete Frames with Reinforced Concrete Partial Infills,” ACI Structural Journal, V. 103, No. 5, Sept.-Oct. 2006, pp. 701-709. doi: 10.14359/1692210.14359/16922 ↗
27. 27. Altin, S.; Anil, Ö.; and Kara, M. E., “Strengthening of RC Nonductile Frames with RC Infills: An Experimental Study,” Cement and Concrete Composites, V. 30, No. 7, 2008, pp. 612-621. doi:10.1016/j.cemconcomp.2007.07.00310.1016/j.cemconcomp.2007.07.003 ↗
28. 28. Baran, M., and Tankut, T., “Retrofit of Non-Ductile RC Frames with Precast Concrete (PC) Wall Panels,” Advances in Structural Engineering, V. 14, No. 6, 2011, pp. 1149-1166. doi: 10.1260/1369-4332.14.6.114910.1260/1369-4332.14.6.1149 ↗
29. 29. Canbay, E.; Ersoy, U.; and Ozcebe, G., “Contribution of Reinforced Concrete Infills to Seismic Behavior of Structural Systems,” ACI Structural Journal, V. 100, No. 5, Sept.-Oct. 2003, pp. 637-643. doi: 10.14359/1280510.14359/12805 ↗
30. 30. Erdem, I.; Akyuz, U.; Ersoy, U.; and Ozcebe, G., “An Experimental Study on Two Different Strengthening Techniques for RC Frames,” Engineering Structures, V. 28, No. 13, 2006, pp. 1843-1851. doi: 10.1016/j.engstruct.2006.03.01010.1016/j.engstruct.2006.03.010 ↗
31. 31. Strepelias, E., “Retrofitting of Existing Frame Structures Through RC Infilling: Experimental and Analytical Investigation,” PhD dissertation, University of Patras, Patras, Greece, 2012.
32. 32. Strepelias, E.; Palios, X.; Busias, S. N.; and Fardis, M. N., “Experimental Investigation of Concrete Frames Infilled with RC for Seismic Rehabilitation,” Journal of Structural Engineering, ASCE, V. 140, No. 1, 2013, p. 04013033. doi:10.1061/(ASCE)ST.1943-541X.000081710.1061/(ASCE)ST.1943-541X.0000817 ↗
33. 33. Georgiou, E.; Kyriakides, N.; and Chrysostomou, C. Z., “FE Model of RC Frames Infilled with RC Walls for Seismic Retrofitting and Nonlinear Parametric Study of Dowels,” Proceedings of the 17th World Conference on Earthquake Engineering, Sendai, Japan, V. 1578, 2020.
34. 34. NZSEE, “Assessment and Improvement of the Structural Performance of Buildings in Earthquakes,” New Zealand Society for Earthquake Engineering, Wellington, New Zealand, 2002.
35. 35. EN 1998-3, “Eurocode 8: Design of Structures for Earthquake Resistance—Part 3: Assessment and Retrofitting of Buildings and Bridges,” European Committee for Standardization, Brussels, Belgium, 2025, 218 pp.
36. 36. FEMA 547, “Techniques for the Seismic Rehabilitation of Existing Buildings,” Federal Emergency Management Agency, Washington, DC, 2006.
37. 37. Bass, R. A.; Carrasquillo, R. L.; Jirsa, J. O.; and Wyllie, L. A., “Interface Shear Capacity of Concrete Surfaces Used in Strengthening Structures,” Phil M. Ferguson Structural Engineering Laboratory, The University of Texas at Austin, Austin, TX, 1985.
38. 38. NRCC, “Guideline for Seismic Upgrading of Building Structures,” National Research Council Canada, Ottawa, ON, Canada, 1995.
39. 39. ASCE/SEI 41‐13, “Seismic Evaluation and Retrofit of Existing Buildings,” American Society of Civil Engineers, Reston, VA, 2014, 506 pp.
40. 40. Royal Decree 19/26.2.59, “Earthquake Design Regulation of Building Works,” Ministry of Public Works, Athens, Greece, 1959.
41. 41. Seismosoft, “SeismoBuild, A Computer Program for Static and Dynamic Nonlinear Analysis of Framed Structures,” 2022, https://seismosoft.com/products/seismobuild/. (last accessed Feb. 24, 2026)
42. 42. Repapis, C.; Vintzileou, E.; and Zeris, C., “Evaluation of the Seismic Performance of Existing RC Buildings I: Suggested Methodology,” Journal of Earthquake Engineering, V. 10, No. 2, 2008, pp. 265-287. doi: 10.1080/1363246060935059610.1080/13632460609350596 ↗
43. 43. ETA-16/0143, “Injection System Hilti HIT-RE 500 V3,” Centre Scientifique et Technique du Batiment, Marne-la-Vallée, France, 2019.
44. 44. ASTM E965-96, “Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique,” ASTM International, West Conshohocken, PA, 1996, 4 pp.
45. 45. Palieraki, V.; Oikonomopoulou, E.; Genesio, G.; and Vintzileou, E., “Concrete Interfaces with Post-Installed Reinforcing Bars and Alternative Connectors,” Structural Concrete Journal, V. 24, 2023, pp. 5265-5283.10.1002/suco.202201034 ↗
46. 46. prEN 1992-1-1, “Eurocode 2: Design of Concrete Structures — Part 1-1: General Rules — Rules for Buildings, Bridges and Civil Engineering Structures (Working Document),” CEN/TC 250, 2021.
47. 47. Palieraki, V.; Zeris, C.; and Vintzileou, E., “Experimental Investigation of the Effect of Compressive Interface Stress on Interfaces in Reinforced Concrete Elements Under Cyclic Action,” Applied Sciences, V. 14, No. 11, 2024, p. 4350. doi: 10.3390/app1411435010.3390/app14114350 ↗
48. 48. Palieraki, V.; Oikonomopoulou, E.; Vintzileou, E.; and Genesio, G., “Cyclic Behavior of Long Concrete Interfaces Crossed by Short Post-Installed Reinforcement,” Engineering Structures, V. 326, 2025, p. 119537. doi: 10.1016/j.engstruct.2024.11953710.1016/j.engstruct.2024.119537 ↗