Experimental Behavior of Concrete Columns Reinforced with Thermomechanically Treated and Cold-Twisted Ribbed Steel Bars
Source abstract
Abstract
The American Concrete Institute (ACI) is a leading authority and resource worldwide for the development and distribution of consensus-based standards, technical resources, educational programs, certification programs, and proven expertise for individuals and organizations involved in concrete design, construction, and materials, who share a commitment to pursuing the best use of concrete.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Fire effects on concrete materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318R-19) (Reapproved 2022),” American Concrete Institute, Farmington Hills, MI, 2019, 624 pp.
2. EN 1998-1:2005, “Eurocode 8: Design of Structures for Earthquake Resistance—Part 1: General Rules, Seismic Actions and Rules for Buildings,” European Committee for Standardization, Brussels, Belgium, 2005.
3. GB-50011-2010, “Code for Seismic Design of Buildings,” Ministry of Housing and Urban-Rural Development of the People’s Republic of China, Beijing, China, 2010.
4. NZS 3101.1:2006, “Concrete Structures Standard, The Design of Concrete Structures,” Standards New Zealand, Wellington, New Zealand, 2006.
5. Dooley, K. L., and Bracci, J. M., “Seismic Evaluation of Column-to-Beam Strength Ratios in Reinforced Concrete Frames,” ACI Structural Journal, V. 98, No. 6, Nov.-Dec. 2001, pp. 843-851.10.14359/10751 ↗
6. ASTM A615/A615M-16, “Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement,” ASTM International, West Conshohocken, PA, 2022.
7. Bilham, R.; Lodi, S.; Hough, S.; Bukhary, S.; Khan, A. M.; and Rafeeqi, S., “Seismic Hazard in Karachi, Pakistan: Uncertain Past, Uncertain Future,” Seismological Research Letters, V. 78, No. 6, 2007, pp. 601-613. doi: 10.1785/gssrl.78.6.60110.1785/gssrl.78.6.601 ↗
8. Rafi, M. M.; Wasiuddin, S.; and Hameed Siddiqui, S., “Assessment of Fire Hazard in Pakistan,” Disaster Prevention and Management, V. 21, No. 1, 2012, pp. 71-84. doi: 10.1108/0965356121120271910.1108/09653561211202719 ↗
9. Rafi, M. M.; Lodi, S. H.; and Nizam, A., “Chemical and Mechanical Properties of Steel Rebars Manufactured in Pakistan and Their Design Implications,” Journal of Materials in Civil Engineering, ASCE, V. 26, No. 2, 2014, pp. 338-348. doi: 10.1061/(ASCE)MT.1943-5533.000081210.1061/(ASCE)MT.1943-5533.0000812 ↗
10. Achamyeleh, T.; Çamur, H.; Savaş, M. A.; and Evcil, A., “Mechanical Strength Variability of Deformed Reinforcing Steel Bars for Concrete Structures in Ethiopia,” Scientific Reports, V. 12, No. 1, 2022, pp. 1-10. doi: 10.1038/s41598-022-06654-110.1038/s41598-022-06654-1 ↗
11. Al-Haddad, M. S., “Curvature Ductility of RC Beams under Low and High Strain Rates,” ACI Structural Journal, V. 92, No. 5, Sept.-Oct. 1995, pp. 526-534.10.14359/903 ↗
12. Apeh, J., and Okoli, G., “Evaluation of Ductility Index of Concrete Beams Reinforced with Rebars Milled from Scrap Metals,” Concrete Research Letters, V. 7, No. 2, 2016, pp. 56-68.
13. Charif, A.; Mourad, S. M.; and Khan, M. I., “Flexural Behavior of Beams Reinforced with Steel Bars Exceeding the Nominal Yield Strength,” Latin American Journal of Solids and Structures, V. 13, No. 5, 2016, pp. 945-963. doi: 10.1590/1679-7825168310.1590/1679-78251683 ↗
14. Goksu, C.; Yilmaz, H.; Chowdhury, S.; Orakcal, K.; and Ilki, A., “The Effect of Lap Splice Length on the Cyclic Lateral Load Behavior of RC Members with Low-Strength Concrete and Plain Bars,” Advances in Structural Engineering, V. 17, No. 5, 2014, pp. 639-658. doi: 10.1260/1369-4332.17.5.63910.1260/1369-4332.17.5.639 ↗
15. Kankam, C. K., “Bond Strength of Reinforcing Steel Bars Milled from Scrap Metals,” Materials & Design, V. 25, No. 3, 2004, pp. 231-238. doi: 10.1016/j.matdes.2003.09.01110.1016/j.matdes.2003.09.011 ↗
16. Odusote, J. K.; Shittu, W.; Adeleke, A. A.; Ikubanni, P. P.; and Adeyemo, O., “Chemical and Mechanical Properties of Reinforcing Steel Bars from Local Steel Plants,” Journal of Failure Analysis and Prevention, V. 19, No. 4, 2019, pp. 1067-1076. doi: 10.1007/s11668-019-00695-x10.1007/s11668-019-00695-x ↗
17. Kim, C.-G.; Park, H.-G.; and Eom, T.-S., “Effects of Type of Bar Lap Splice on Reinforced Concrete Columns Subjected to Cyclic Loading,” ACI Structural Journal, V. 116, No. 2, Mar. 2019, pp. 183-194. doi: 10.14359/5171114210.14359/51711142 ↗
18. Ghosh, K. K., and Sheikh, S. A., “Seismic Upgrade with Carbon Fiber-Reinforced Polymer of Columns Containing Lap-Spliced Reinforcing Bars,” ACI Structural Journal, V. 104, No. 2, Mar.-Apr. 2007, pp. 227-236.10.14359/18535 ↗
19. Kim, C.-G.; Park, H.-G.; and Eom, T.-S., “Seismic Performance of Reinforced Concrete Columns with Lap Splices in Plastic Hinge Region,” ACI Structural Journal, V. 115, No. 1, Jan. 2018, pp. 235-245. doi: 10.14359/5170110910.14359/51701109 ↗
20. Lynn, A. C.; Moehle, J. P.; Mahin, S. A.; and Holmes, W. T., “Seismic Evaluation of Existing Reinforced Concrete Building Columns,” Earthquake Spectra, V. 12, No. 4, 1996, pp. 715-739. doi: 10.1193/1.158590710.1193/1.1585907 ↗
21. Melek, M., and Wallace, J. W., “Cyclic Behavior of Columns with Short Lap Splices,” ACI Structural Journal, V. 101, No. 6, Nov.-Dec. 2004, pp. 802-811.10.14359/13455 ↗
22. Boyes, A.; Bull, D. K.; and Pampanin, S., “Seismic Performance of Concrete Columns with Inadequate Transverse Reinforcement,” New Zealand Concrete Industry Conference, Rotorua, New Zealand, 2008.
23. Lee, C. S., and Han, S. W., “Cyclic Behaviour of Lightly-Reinforced Concrete Columns with Short Lap Splices Subjected to Unidirectional and Bidirectional Loadings,” Engineering Structures, V. 189, 2019, pp. 373-384. doi: 10.1016/j.engstruct.2019.03.10810.1016/j.engstruct.2019.03.108 ↗
24. Mehmood, T.; Rodsin, K.; Warnitchai, P.; and Kolozvari, K., “Investigating the Vulnerability of Nonductile Reinforced Concrete Columns in Moderate Seismic Regions to Gravity Load Collapse,” Structural Design of Tall and Special Buildings, V. 28, No. 4, 2019, p. e1578. doi: 10.1002/tal.157810.1002/tal.1578 ↗
25. Hannewald, P.; Bimschas, M.; and Dazio, A., “Quasi-Static Cyclic Tests on RC Bridge Piers with Detailing Deficiencies,” IBK Bericht 352, 2013.
26. Aboutaha, R. S.; Engelhardt, M. D.; Jirsa, J. O.; and Kreger, M. E., “Experimental Investigation of Seismic Repair of Lap Splice Failures in Damaged Concrete Columns,” ACI Structural Journal, V. 96, No. 2, Mar.-Apr. 1999, pp. 297-306.10.14359/622 ↗
27. Haroun, M. A., and Elsanadedy, H. M., “Fiber-Reinforced Plastic Jackets for Ductility Enhancement of Reinforced Concrete Bridge Columns with Poor Lap-Splice Detailing,” Journal of Bridge Engineering, ASCE, V. 10, No. 6, 2005, pp. 749-757. doi: 10.1061/(ASCE)1084-0702(2005)10:6(749)10.1061/(ASCE)1084-0702(2005)10:6(749) ↗
28. Harries, K. A.; Ricles, J. R.; Pessiki, S.; and Sause, R., “Seismic Retrofit of Lap Splices in Nonductile Square Columns Using Carbon Fiber-Reinforced Jackets,” ACI Structural Journal, V. 103, No. 6, Nov.-Dec. 2006, pp. 874-884.10.14359/18242 ↗
29. Harajli, M. H., and Dagher, F., “Seismic Strengthening of Bond-Critical Regions in Rectangular Reinforced Concrete Columns Using Fiber-Reinforced Polymer Wraps,” ACI Structural Journal, V. 105, No. 1, Jan.-Feb. 2008, pp. 68-77.10.14359/19070 ↗
30. ElGawady, M.; Endeshaw, M.; McLean, D.; and Sack, R., “Retrofitting of Rectangular Columns with Deficient Lap Splices,” Journal of Composites for Construction, ASCE, V. 14, No. 1, 2010, pp. 22-35. doi: 10.1061/(ASCE)CC.1943-5614.000004710.1061/(ASCE)CC.1943-5614.0000047 ↗
31. Harajli, M. H., “Seismic Behavior of RC Columns with Bond-Critical Regions: Criteria for Bond Strengthening Using External FRP Jackets,” Journal of Composites for Construction, ASCE, V. 12, No. 1, 2008, pp. 69-79. doi: 10.1061/(ASCE)1090-0268(2008)12:1(69)10.1061/(ASCE)1090-0268(2008)12:1(69) ↗
32. Bournas, D. A.; Triantafillou, T. C.; Zygouris, K.; and Stavropoulos, F., “Textile-Reinforced Mortar versus FRP Jacketing in Seismic Retrofitting of RC Columns with Continuous or Lap-Spliced Deformed Bars,” Journal of Composites for Construction, ASCE, V. 13, No. 5, 2009, pp. 360-371. doi: 10.1061/(ASCE)CC.1943-5614.000002810.1061/(ASCE)CC.1943-5614.0000028 ↗
33. Pam, H., and Ho, J., “Effects of Steel Lap Splice Locations on Strength and Ductility of Reinforced Concrete Columns,” Advances in Structural Engineering, V. 13, No. 1, 2010, pp. 199-214. doi: 10.1260/1369-4332.13.1.19910.1260/1369-4332.13.1.199 ↗
34. Chowdhury, S. R., and Orakcal, K., “Analytical Modeling of Columns with Inadequate Lap Splices,” ACI Structural Journal, V. 110, No. 5, Sept.-Oct. 2013, pp. 735-744.10.14359/51685827 ↗
35. Grammatikou, S.; Biskinis, D.; and Fardis, M. N., “Effect of Load Cycling, FRP Jackets, and Lap-Splicing of Longitudinal Bars on the Effective Stiffness and Ultimate Deformation of Flexure-Controlled RC Members,” Journal of Structural Engineering, ASCE, V. 144, No. 6, 2018, p. 04018056. doi: 10.1061/(ASCE)ST.1943-541X.000204510.1061/(ASCE)ST.1943-541X.0002045 ↗
36. Ding, Y.; Zeng, B.; Zhou, Z.; Wei, Y.; and Zhu, M., “Seismic Retrofitting of RC Columns Using Stainless Steel Grid-Reinforced UHPC Jackets in Plastic Hinge Zone,” Journal of Building Engineering, V. 84, 2024, p. 108637. doi: 10.1016/j.jobe.2024.10863710.1016/j.jobe.2024.108637 ↗
37. Hu, B.; Wang, X.; Zhou, Y.; Huang, X.; and Zhu, Z., “Seismic Performance of Shear-Critical RC Columns Strengthened by Multiple Composites Considering Shifted Failure Zone,” Case Studies in Construction Materials, V. 20, 2024, p. e02971.10.1016/j.cscm.2024.e02971 ↗
38. Ke, Y.; Zhang, T.; Nie, X.; and Zhang, S., “Compressive Behavior of RC Columns Strengthened with FRP and Prefabricated UHPC Blocks,” Engineering Structures, V. 314, 2024, p. 118290. doi: 10.1016/j.engstruct.2024.11829010.1016/j.engstruct.2024.118290 ↗
39. Di Ludovico, M.; Verderame, G. M.; Prota, A.; Manfredi, G.; and Cosenza, E., “Cyclic Behavior of Nonconforming Full-Scale RC Columns,” Journal of Structural Engineering, ASCE, V. 140, No. 5, 2014, p. 04013107. doi: 10.1061/(ASCE)ST.1943-541X.000089110.1061/(ASCE)ST.1943-541X.0000891 ↗
40. Melo, J.; Varum, H.; and Rossetto, T., “Experimental Cyclic Behaviour of RC Columns with Plain Bars and Proposal for Eurocode 8 Formula Improvement,” Engineering Structures, V. 88, 2015, pp. 22-36. doi: 10.1016/j.engstruct.2015.01.03310.1016/j.engstruct.2015.01.033 ↗
41. Verderame, G. M.; Fabbrocino, G.; and Manfredi, G., “Seismic Response of R.C. Columns with Smooth Reinforcement. Part II: Cyclic Tests,” Engineering Structures, V. 30, No. 9, 2008, pp. 2289-2300. doi: 10.1016/j.engstruct.2008.01.02410.1016/j.engstruct.2008.01.024 ↗
42. Rodrigues, H.; Arêde, A.; Varum, H.; and Costa, A. G., “Experimental Evaluation of Rectangular Reinforced Concrete Column Behaviour under Biaxial Cyclic Loading,” Earthquake Engineering & Structural Dynamics, V. 42, No. 2, 2013, pp. 239-259. doi: 10.1002/eqe.220510.1002/eqe.2205 ↗
43. Kawashima, K.; Ogimoto, H.; Hayakawa, R.; and Watanabe, G., “Effect of Bilateral Excitation on the Seismic Performance of Reinforced Concrete Bridge Columns,” 8th US National Conference on Earthquake Engineering, San Francisco, CA, 2006.
44. Chang, S.-Y., “Experimental Studies of Reinforced Concrete Bridge Columns under Axial Load Plus Biaxial Bending,” Journal of Structural Engineering, ASCE, V. 136, No. 1, 2010, pp. 12-25. doi: 10.1061/(ASCE)0733-9445(2010)136:1(12)10.1061/(ASCE)0733-9445(2010)136:1(12) ↗
45. Kim, C.-G.; Park, H.-G.; and Eom, T.-S., “Effects of Type of Bar Lap Splice on Reinforced Concrete Columns Subjected to Cyclic Loading,” ACI Structural Journal, V. 116, No. 2, Mar. 2019, pp. 183-194. doi: 10.14359/5171114210.14359/51711142 ↗
46. Pam, H. J., and Ho, J. C., “Effects of Steel Lap Splice Locations on Strength and Ductility of Reinforced Concrete Columns,” Advances in Structural Engineering, V. 13, No. 1, 2010, pp. 199-214. doi: 10.1260/1369-4332.13.1.19910.1260/1369-4332.13.1.199 ↗
47. Cai, R.; Zhang, J.; Liu, Y.; and Tao, X., “Seismic Behavior of Recycled Concrete Columns Reinforced with Ultra-High-Strength Steel Bars,” Engineering Structures, V. 279, 2023, p. 115633. doi: 10.1016/j.engstruct.2023.11563310.1016/j.engstruct.2023.115633 ↗
48. Li, Y.; Wu, K.; Pan, J.; Zhao, C.; Wang, F.; Zhang, B.; and Liu, Q., “Experimental Investigation on Seismic Performance of Columns Enhanced by High-Strength Steel Bars and Ultra-High-Performance Fiber Reinforced Concrete,” Case Studies in Construction Materials, V. 20, 2024, p. e03377.10.1016/j.cscm.2024.e03377 ↗
49. Zhang, Y.; Xiong, X.; He, L.; Zhang, X.; and He, M., “Behavior of Large-Scale Concrete Columns Reinforced with High-Strength and High-Toughness Steel Bars under Axial and Eccentric Compression,” Journal of Building Engineering, V. 79, 2023, p. 107766. doi: 10.1016/j.jobe.2023.10776610.1016/j.jobe.2023.107766 ↗
50. Rafi, M. M., and Khan, M. S., “Assessment of Use of Steel Bars with Unintended High Strength in Tied Columns,” ACI Structural Journal, V. 121, No. 5, Sept. 2024, pp. 65-76. doi: 10.14359/5174085210.14359/51740852 ↗
51. Rafi, M. M.; Dahar, A. B.; Aziz, T.; and Lodi, S. H., “Elevated Temperature Testing of Thermomechanically Treated Steel Bars,” Journal of Materials in Civil Engineering, ASCE, V. 32, No. 6, 2020, p. 04020145. doi: 10.1061/(ASCE)MT.1943-5533.000320210.1061/(ASCE)MT.1943-5533.0003202 ↗
52. Rafi, M. M.; Dahar, A. B.; and Aziz, T., “High-Temperature Behaviour of Thermo-Mechanically Treated and Cold-Drawn Twisted Steel Bars,” Proceedings of the Institution of Civil Engineers—Construction Materials, V. 175, No. 4, 2022, pp. 186-196. 10.1680/jcoma.18.0001410.1680/jcoma.18.00014 ↗
53. ACI Committee 363, “High-Strength Concrete (ACI 363R),” 7th International Symposium on the Utilization of High-Strength/High-Performance Concrete, SP-228, H. G. Russell, ed., American Concrete Institute, Farmington Hills, MI, 2005, pp. 79-80. doi: 10.14359/1446110.14359/14461 ↗
54. BS 4449:1997, “Specification for Carbon Steel Bars for the Reinforcement of Concrete,” British Standards Institution, London, UK, 1997.
55. ACI Committee 374, “Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary (ACI 374.1-05) (Reapproved 2019),” American Concrete Institute, Farmington Hills, MI, 2005, 9 pp.
56. Rafi, M.; Lodi, S.; Al-Sadoon, Z.; Saatcioglu, M.; and Palermo, D., “Shake-Table Testing of Deficient Reinforced Concrete Frame Retrofitted with Buckling Restrained Brace,” ACI Structural Journal, V. 118, No. 3, May 2021, pp. 161-173.10.14359/51729351 ↗
57. Jin, L.; Zhang, S.; Han, J.; Li, D.; and Du, X., “Effect of Cross-Section Size on Flexural Compressive Failure of RC Columns: Monotonic and Cyclic Tests,” Engineering Structures, V. 186, 2019, pp. 456-470. doi: 10.1016/j.engstruct.2019.02.04010.1016/j.engstruct.2019.02.040 ↗
58. Park, R., “Evaluation of Ductility of Structures and Structural Assemblages from Laboratory Testing,” Bulletin of the New Zealand Society for Earthquake Engineering, V. 22, No. 3, 1989, pp. 155-166. doi: 10.5459/bnzsee.22.3.155-16610.5459/bnzsee.22.3.155-166 ↗
59. Opabola, E. A., and Elwood, K. J., “Seismic Assessment of Reinforced Concrete Columns with Short Lap Splices,” Earthquake Spectra, V. 37, No. 3, 2021, pp. 1726-1757. doi: 10.1177/875529302199483410.1177/8755293021994834 ↗
60. ACI Committee 369, “Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary (ACI 369-11),” American Concrete Institute, Farmington Hills, MI, 2011, 35 pp.
61. FEMA 273, “NEHRP Guidelines for the Seismic Rehabilitation of Buildings (FEMA 273),” Building Seismic Safety Council, Washington, DC, 1997.
62. Rodriguez, M., and Rodriguez, V., “Performance-Based Earthquake-Resistant Design of Confined Masonry Walls,” Proceedings of the 12th World Conference on Earthquake Engineering (12WCEE), Auckland, New Zealand, 2000.
63. ASCE 41-17, “Seismic Evaluation and Retrofit of Existing Buildings,” American Society of Civil Engineers, Reston, VA, 2017.
64. Elwood, K. J.; Matamoros, A. B.; Wallace, J. W.; Lehman, D. E.; Heintz, J. A.; Mitchell, A. D.; Moore, M. A.; Valley, M. T.; Lowes, L. N.; Comartin, C. D.; and Moehle, J. P., “Update to ASCE/SEI 41 Concrete Provisions,” Earthquake Spectra, V. 23, No. 3, 2007, pp. 493-523. doi: 10.1193/1.275771410.1193/1.2757714 ↗
65. Opabola, E. A., and Elwood, K. J., “Simplified Approaches for Estimating Yield Rotation of Reinforced Concrete Beam-Column Components,” ACI Structural Journal, V. 117, No. 4, July 2020, pp. 279-291.10.14359/51724667 ↗
66. Park, R., and Paulay, T., Reinforced Concrete Structures, John Wiley & Sons, Inc., New York, 1991.
67. Sungjin, B., and Bayrak, O., “Plastic Hinge Length of Reinforced Concrete Columns,” ACI Structural Journal, V. 105, No. 3, May-June 2008, pp. 290-300.10.14359/19788 ↗
68. Fedak, L. K., “Evaluation of Plastic Hinge Models and Inelastic Analysis Tools for Performance-Based Seismic Design of RC Bridge Columns,” master’s thesis, Michigan State University, East Lansing, MI, 2012.
69. Xu, L.; Pan, J.; Lu, C.; and Yin, W., “Development Mechanism of Plastic Hinge in Reinforced Engineered Cementitious Composite Beams under Monotonic Loading,” Structural Concrete, V. 20, No. 1, 2019, pp. 252-266. doi: 10.1002/suco.20180000910.1002/suco.201800009 ↗
70. Zhang, Y.; Gong, J.; Zhang, Q.; and Han, S., “Equivalent Damping Ratio Model of Flexure-Shear Critical RC Columns,” Engineering Structures, V. 130, 2017, pp. 52-66. doi: 10.1016/j.engstruct.2016.10.00310.1016/j.engstruct.2016.10.003 ↗