Reinforced Masonry Building Under Lateral Loading-A Numerical Study (Open Source)

1. AS 3700:2018, “Australian Standard of Masonry Structures,” Standards Australia, Sydney, Australia, 2018.

2. AS 3600:2018, “Australian Standard of Concrete Structures,” Standards Australia, Sydney, Australia, 2018.

3. TMS 402/602-16, “Building Code Requirements and Specification for Masonry Structures,” The Masonry Society, Longmont, CO, 2016.

4. Nolph, S. M., and ElGawady, M. A., “Static Cyclic Response of Partially Grouted Masonry Shear Walls,” Journal of Structural Engineering, ASCE, V. 138, No. 7, 2012, pp. 864-879. doi: 10.1061/(ASCE)ST.1943-541X.000052910.1061/(ASCE)ST.1943-541X.0000529 ↗

5. Shing, P. B.; Schuller, M.; and Hoskere, V. S., “In-Plane Resistance of Reinforced Masonry Shear Walls,” Journal of Structural Engineering, ASCE, V. 116, No. 3, 1990, pp. 619-640. doi: 10.1061/(ASCE)0733-9445(1990)116:3(619)10.1061/(ASCE)0733-9445(1990)116:3(619) ↗

6. Voon, K. C., and Ingham, J. M., “Experimental In-Plane Shear Strength Investigation of Reinforced Concrete Masonry Walls,” Journal of Structural Engineering, ASCE, V. 132, No. 3, 2006, pp. 400-408. doi: 10.1061/(ASCE)0733-9445(2006)132:3(400)10.1061/(ASCE)0733-9445(2006)132:3(400) ↗

7. Shedid, M. T.; El-Dakhakhni, W. W.; and Drysdale, R. G., “Behavior of Fully Grouted Reinforced Concrete Masonry Shear Walls Failing in Flexure: Analysis,” Engineering Structures, V. 31, No. 9, 2009, pp. 2032-2044. doi: 10.1016/j.engstruct.2009.03.00610.1016/j.engstruct.2009.03.006 ↗

8. Seif ElDin, H. M., and Galal, K., “Effect of Reinforcement Anchorage End Detail and Spacing on Seismic Performance of Masonry Shear Walls,” Engineering Structures, V. 157, 2018, pp. 268-279. doi: 10.1016/j.engstruct.2017.11.07310.1016/j.engstruct.2017.11.073 ↗

9. Haider, W., and Dhanasekar, M., “Experimental Study of Monotonically Loaded Wide Spaced Reinforced Masonry Shear Walls,” Australian Journal of Structural Engineering, V. 5, No. 2, 2004, pp. 101-118. doi: 10.1080/13287982.2004.1146493110.1080/13287982.2004.11464931 ↗

10. Janaraj, T., and Dhanasekar, M., “Studies on the Existing In-Plane Shear Equations of Partially Grouted Reinforced Masonry,” Australian Journal of Structural Engineering, V. 17, No. 3, 2016, pp. 180-187. doi: 10.1080/13287982.2016.124074310.1080/13287982.2016.1240743 ↗

11. Bolhassani, M.; Hamid, A. A.; Johnson, C.; Moon, F. L.; and Schultz, A. E., “New Design Detail to Enhance the Seismic Performance of Ordinary Reinforced Partially Grouted Masonry Structures,” Journal of Structural Engineering, ASCE, V. 142, No. 12, 2016, p. 04016142. doi: 10.1061/(ASCE)ST.1943-541X.000162010.1061/(ASCE)ST.1943-541X.0001620 ↗

12. El-Dakhakhni, W. W.; Banting, B. R.; and Miller, S. C., “Seismic Performance Parameter Quantification of Shear-Critical Reinforced Concrete Masonry Squat Walls,” Journal of Structural Engineering, ASCE, V. 139, No. 6, 2013, pp. 957-973. doi: 10.1061/(ASCE)ST.1943-541X.000071310.1061/(ASCE)ST.1943-541X.0000713 ↗

13. Seif ElDin, H. M., and Galal, K., “In-Plane Seismic Performance of Fully Grouted Reinforced Masonry Shear Walls,” Journal of Structural Engineering, ASCE, V. 143, No. 7, 2017, p. 04017054. doi: 10.1061/(ASCE)ST.1943-541X.000175810.1061/(ASCE)ST.1943-541X.0001758 ↗

14. Dhanasekar, M., and Haider, W., “Explicit Finite Element Analysis of Lightly Reinforced Masonry Shear Walls,” Computers & Structures, V. 86, No. 1-2, 2008, pp. 15-26. doi: 10.1016/j.compstruc.2007.06.00610.1016/j.compstruc.2007.06.006 ↗

15. Kasparik, T.; Tait, M. J.; and El-Dakhakhni, W. W., “Seismic Performance Assessment of Partially Grouted, Nominally Reinforced Concrete-Masonry Structural Walls Using Shake Table Testing,” Journal of Performance of Constructed Facilities, ASCE, V. 28, No. 2, 2014, pp. 216-227. doi: 10.1061/(ASCE)CF.1943-5509.000041610.1061/(ASCE)CF.1943-5509.0000416 ↗

16. Minaie, E.; Mota, M.; Moon, F. L.; and Hamid, A. A., “In-Plane Behavior of Partially Grouted Reinforced Concrete Masonry Shear Walls,” Journal of Structural Engineering, ASCE, V. 136, No. 9, 2010, pp. 1089-1097. doi: 10.1061/(ASCE)ST.1943-541X.000020610.1061/(ASCE)ST.1943-541X.0000206 ↗

17. Shedid, M. T.; Drysdale, R. G.; and El-Dakhakhni, W. W., “Behavior of Fully Grouted Reinforced Concrete Masonry Shear Walls Failing in Flexure: Experimental Results,” Journal of Structural Engineering, ASCE, V. 134, No. 11, 2008, pp. 1754-1767. doi: 10.1061/(ASCE)0733-9445(2008)134:11(1754)10.1061/(ASCE)0733-9445(2008)134:11(1754) ↗

18. Janaraj, T., and Dhanasekar, M., “Design Expressions for the In-Plane Shear Capacity of Confined Masonry Shear Walls Containing Squat Panels,” Journal of Structural Engineering, ASCE, V. 142, No. 2, 2016, p. 04015127. doi: 10.1061/(ASCE)ST.1943-541X.000140310.1061/(ASCE)ST.1943-541X.0001403 ↗

19. Andolfato, R. P.; Ramalho, M. A.; Corrêa, M. R. S.; and Haach, V. G., “Study of Vertical Load Distribution in Full-Scale Four-Story Masonry Building,” ACI Structural Journal, V. 111, No. 3, May-June 2014, pp. 685-692. doi: 10.14359/5168662610.14359/51686626 ↗

20. Drysdale, R. G.; El-Dakhakhni, W. W.; and Kolodziejski, E. A., “Shear Capacity for Flange-Web Intersection of Concrete Block Shear Walls,” Journal of Structural Engineering, ASCE, V. 134, No. 6, 2008, pp. 947-960. doi: 10.1061/(ASCE)0733-9445(2008)134:6(947)10.1061/(ASCE)0733-9445(2008)134:6(947) ↗

21. Baxter, R. P., “The Out-of-Plane Behaviour of Reinforced Concrete Masonry Walls with Window Openings,” Master’s thesis, University of Canterbury, Christchurch, New Zealand, 2001.

22. Tomaževič, M., and Klemenc, I., “Seismic Behaviour of Confined Masonry Walls,” Earthquake Engineering & Structural Dynamics, V. 26, No. 10, 1997, pp. 1059-1071. doi: 10.1002/(SICI)1096-9845(199710)26:103.0.CO;2-M10.1002/(SICI)1096-9845(199710)26:10<1059::AID-EQE694>3.3.CO;2-D ↗

23. Abboud, B. E.; Hamid, A. A.; and Harris, H. G., “Flexural Behavior of Reinforced Concrete Masonry Walls under Out-of-Plane Monotonic Loads,” ACI Structural Journal, V. 93, No. 3, May-June 1996, pp. 327-335.10.14359/9692 ↗

24. Browning, R. S.; Dinan, R. J.; and Davidson, J. S., “Blast Resistance of Fully Grouted Reinforced Concrete Masonry Veneer Walls,” Journal of Performance of Constructed Facilities, ASCE, V. 28, No. 2, 2014, pp. 228-241. doi: 10.1061/(ASCE)CF.1943-5509.000043410.1061/(ASCE)CF.1943-5509.0000434 ↗

25. da Porto, F.; Mosele, F.; and Modena, C., “Experimental Testing of Tall Reinforced Masonry Walls under Out-of-Plane Actions,” Construction and Building Materials, V. 24, No. 12, 2010, pp. 2559-2571. doi: 10.1016/j.conbuildmat.2010.05.02010.1016/j.conbuildmat.2010.05.020 ↗

26. Noor-E-Khuda, S., and Dhanasekar, M., “Three Sides Supported Unreinforced Masonry Walls under Multi-Directional Loading,” Construction and Building Materials, V. 188, 2018, pp. 1207-1220. doi: 10.1016/j.conbuildmat.2018.08.14410.1016/j.conbuildmat.2018.08.144 ↗

27. Noor-E-Khuda, S., and Dhanasekar, M., “Masonry Walls under Combined In-Plane and Out-of-Plane Loadings,” Journal of Structural Engineering, ASCE, V. 144, No. 2, 2018, p. 04017186. doi: 10.1061/(ASCE)ST.1943-541X.000193010.1061/(ASCE)ST.1943-541X.0001930 ↗

28. Noor-E-Khuda, S.; Dhanasekar, M.; and Thambiratnam, D. P., “Out-of-Plane Deformation and Failure of Masonry Walls with Various Forms of Reinforcement,” Composite Structures, V. 140, 2016, pp. 262-277. doi: 10.1016/j.compstruct.2015.12.02810.1016/j.compstruct.2015.12.028 ↗

29. Lourenço, P. B., “Anisotropic Softening Model for Masonry Plates and Shells,” Journal of Structural Engineering, ASCE, V. 126, No. 9, 2000, pp. 1008-1016. doi: 10.1061/(ASCE)0733-9445(2000)126:9(1008)10.1061/(ASCE)0733-9445(2000)126:9(1008) ↗

30. Milani, G.; Lourenço, P.; and Tralli, A., “Homogenization Approach for the Limit Analysis of Out-of-Plane Loaded Masonry Walls,” Journal of Structural Engineering, ASCE, V. 132, No. 10, 2006, pp. 1650-1663. doi: 10.1061/(ASCE)0733-9445(2006)132:10(1650)10.1061/(ASCE)0733-9445(2006)132:10(1650) ↗

31. Koutromanos, I., and Shing, P. B., “Cohesive Crack Model to Simulate Cyclic Response of Concrete and Masonry Structures,” ACI Structural Journal, V. 109, No. 3, May-June 2012, pp. 349-358.10.14359/51683748 ↗

32. Zhuge, Y.; Thambiratnam, D.; and Corderoy, J., “Nonlinear Dynamic Analysis of Unreinforced Masonry,” Journal of Structural Engineering, ASCE, V. 124, No. 3, 1998, pp. 270-277. doi: 10.1061/(ASCE)0733-9445(1998)124:3(270)10.1061/(ASCE)0733-9445(1998)124:3(270) ↗

33. Minaie, E.; Moon, F. L.; and Hamid, A. A., “Nonlinear Finite Element Modeling of Reinforced Masonry Shear Walls for Bidirectional Loading Response,” Finite Elements in Analysis and Design, V. 84, 2014, pp. 44-53. doi: 10.1016/j.finel.2014.02.00110.1016/j.finel.2014.02.001 ↗

34. Voon, K. C., and Ingham, J. M., “Design Expression for the In-Plane Shear Strength of Reinforced Concrete Masonry,” Journal of Structural Engineering, ASCE, V. 133, No. 5, 2007, pp. 706-713. doi: 10.1061/(ASCE)0733-9445(2007)133:5(706)10.1061/(ASCE)0733-9445(2007)133:5(706) ↗

35. Seible, F.; Priestley, M. J. N.; Kingsley, G. R.; and Kürkchübasche, A. G., “Seismic Response of Full-Scale Five-Story Reinforced-Masonry Building,” Journal of Structural Engineering, ASCE, V. 120, No. 3, 1994, pp. 925-946. doi: 10.1061/(ASCE)0733-9445(1994)120:3(925)10.1061/(ASCE)0733-9445(1994)120:3(925) ↗

36. Ali Shah, S. M.; Shahzada, K.; Gencturk, B.; and Memon, S. A., “Retrofitting of Full-Scale Confined Masonry Building Using Ferro-Cement Overlay,” Journal of Performance of Constructed Facilities, ASCE, V. 31, No. 5, 2017, p. 04017079. doi: 10.1061/(ASCE)CF.1943-5509.000106010.1061/(ASCE)CF.1943-5509.0001060 ↗

37. Ezzeldin, M.; El-Dakhakhni, W.; and Wiebe, L., “Reinforced Masonry Building Seismic Response Models for ASCE/SEI-41,” Journal of Structural Engineering, ASCE, V. 144, No. 1, 2018, p. 04017175. doi: 10.1061/(ASCE)ST.1943-541X.000191410.1061/(ASCE)ST.1943-541X.0001914 ↗

38. Heerema, P.; Shedid, M.; and El-Dakhakhni, W., “Seismic Response Analysis of a Reinforced Concrete Block Shear Wall Asymmetric Building,” Journal of Structural Engineering, ASCE, V. 141, No. 7, 2015, p. 04014178. doi: 10.1061/(ASCE)ST.1943-541X.000114010.1061/(ASCE)ST.1943-541X.0001140 ↗

39. Siyam, M. A.; Konstantinidis, D.; and El-Dakhakhni, W., “Collapse Fragility Evaluation of Ductile Reinforced Concrete Block Wall Systems for Seismic Risk Assessment,” Journal of Performance of Constructed Facilities, ASCE, V. 30, No. 6, 2016, p. 04016047. doi: 10.1061/(ASCE)CF.1943-5509.000089510.1061/(ASCE)CF.1943-5509.0000895 ↗

40. El-Dakhakhni, W., and Ashour, A., “Seismic Response of Reinforced-Concrete Masonry Shear-Wall Components and Systems: State of the Art,” Journal of Structural Engineering, ASCE, V. 143, No. 9, 2017, p. 03117001. doi: 10.1061/(ASCE)ST.1943-541X.000184010.1061/(ASCE)ST.1943-541X.0001840 ↗

41. Ezzeldin, M.; Wiebe, L.; and El-Dakhakhni, W., “System-Level Seismic Risk Assessment Methodology: Application to Reinforced Masonry Buildings with Boundary Elements,” Journal of Structural Engineering, ASCE, V. 143, No. 9, 2017, p. 04017084. doi: 10.1061/(ASCE)ST.1943-541X.000181510.1061/(ASCE)ST.1943-541X.0001815 ↗

42. Ashour, A.; Ezzeldin, M.; and El-Dakhakhni, W., “System-Level Seismic Damage Assessment Methodology for Reinforced Masonry Shear Wall Buildings,” Journal of Structural Engineering, ASCE, V. 144, No. 8, 2018, p. 04018117. doi: 10.1061/(ASCE)ST.1943-541X.000209110.1061/(ASCE)ST.1943-541X.0002091 ↗

43. Medeiros, K. A. S.; Chavez, K. H.; Fonseca, F. S.; Parsekian, G. A.; and Shrive, N. G., “Parametric Study of Multi-Story, Perforated, Partially Grouted Masonry Walls Subjected to In-Plane Cyclic Actions,” Canadian Journal of Civil Engineering, V. 48, No. 8, 2021, pp. 1046-1055. doi: 10.1139/cjce-2020-012810.1139/cjce-2020-0128 ↗

44. Chavez, K. H., 2018, “Parametric Study on Multi-Story, Partially Grouted, Perforated, Masonry Shear Walls by Finite Element Analysis,” Master’s thesis, Brigham Young University, Provo, UT, https://scholarsarchive.byu.edu/etd/7059. (last accessed Sept. 13, 2022)

45. Buxton, J. R., 2017, “Strut-and-Tie Modeling of Multistory, Partially-Grouted, Concrete Masonry Shear Walls with Openings,” Master’s thesis, Brigham Young University, Provo, UT, https://scholarsarchive.byu.edu/etd/6292. (last accessed Sept. 13, 2022)

46. AS 1170.4-2007, “Structural Design Actions – Part 4: Earthquake Actions in Australia,” Standards Australia, Sydney, Australia, 2007.

47. Ullah, S. N.; Noor, E.; Noor-E-Khuda, S.; Fook Hou, L.; Suntharavadivel, T.; and Albermani, F., “Deep Undrained Bearing Capacity of Rectangular Foundations in Uniform Strength Clay,” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, V. 146, No. 10, 2020, p. 04020105. doi: 10.1061/(ASCE)GT.1943-5606.000235610.1061/(ASCE)GT.1943-5606.0002356 ↗

48. Noor-E-Khuda, S.; Dhanasekar, M.; and Thambiratnam, D. P., “An Explicit Finite Element Modelling Method for Masonry Walls under Out-of-Plane Loading,” Engineering Structures, V. 113, 2016, pp. 103-120. doi: 10.1016/j.engstruct.2016.01.02610.1016/j.engstruct.2016.01.026 ↗

49. Hibbitt, H.; Karlsson, B.; and Sorensen, P., “Abaqus Analysis User’s Manual Version 6.10,” Dassault Systèmes Simulia Corp., Providence, RI, 2011.

50. Zahra, T.; Thamboo, J.; Asad, M.; and Song, M., “Experimental Investigation on the Effectiveness of Lateral Restrainers to the Vertical Steel in Reinforced Masonry Walls under Axial Compression,” Construction and Building Materials, V. 297, 2021, Article No. 123790. doi: 10.1016/j.conbuildmat.2021.12379010.1016/j.conbuildmat.2021.123790 ↗

51. Noor-E-Khuda, S., and Dhanasekar, M., “On the Out-of-Plane Flexural Design of Reinforced Masonry Walls,” Journal of Building Engineering, V. 27, 2020, Article No. 100945. doi: 10.1016/j.jobe.2019.10094510.1016/j.jobe.2019.100945 ↗

52. Park, R., “Evaluation of Ductility of Structures and Structural Assemblages from Laboratory Testing,” Bulletin of the New Zealand Society for Earthquake Engineering, V. 22, No. 3, 1989, pp. 155-166. doi: 10.5459/bnzsee.22.3.155-16610.5459/bnzsee.22.3.155-166 ↗

53. Tomaževič, M., and Weiss, P., “Seismic Behavior of Plain- and Reinforced-Masonry Buildings,” Journal of Structural Engineering, ASCE, V. 120, No. 2, 1994, pp. 323-338. doi: 10.1061/(ASCE)0733-9445(1994)120:2(323)10.1061/(ASCE)0733-9445(1994)120:2(323) ↗

54. Stavridis, A.; Ahmadi, F.; Mavros, M.; Shing, P. B.; Klingner, R. E.; and McLean, D., “Shake-Table Tests of a Full-Scale Three-Story Reinforced Masonry Shear Wall Structure,” Journal of Structural Engineering, ASCE, V. 142, No. 10, 2016, p. 04016074. doi: 10.1061/(ASCE)ST.1943-541X.000152710.1061/(ASCE)ST.1943-541X.0001527 ↗

55. Voon, K. C., and Ingham, J. M., “Experimental In-Plane Strength Investigation of Reinforced Concrete Masonry Walls with Openings,” Journal of Structural Engineering, ASCE, V. 134, No. 5, 2008, pp. 758-768. doi: 10.1061/(ASCE)0733-9445(2008)134:5(758)10.1061/(ASCE)0733-9445(2008)134:5(758) ↗

56. Noor-E-Khuda, S., and Thambiratnam, D. P., “In-Plane and Out-of-Plane Structural Performance of Fully Grouted Reinforced Masonry Walls with Varying Reinforcement Ratio–A Numerical Study,” Engineering Structures, V. 248, 2021, Article No. 113288. doi: 10.1016/j.engstruct.2021.11328810.1016/j.engstruct.2021.113288 ↗

57. Fortes, E. S.; Silva, M. R.; Parsekian, G. A.; Fonseca, F. S.; and Shrive, N. G., “Quasi-Static Cyclic Testing of Partially Grouted Masonry Walls with Openings—Preliminary Results,” Brick and Block Masonry: Proceedings of the 16th International Brick and Block Masonry Conference, Padua, Italy, June 26-30, 2016, pp. 187-194.10.1201/b21889-21 ↗

58. Fortes, E. S.; Parsekian, G. A.; Fonseca, F. S.; and Shrive, N. G., “Influence of Openings on Quasi-Static Cyclic Behaviour of Partially Grouted Masonry Walls,” 13th Canadian Masonry Symposium, Halifax, NS, Canada, 2017, 11 pp.10.1201/b21889-21 ↗

59. Cheng, J.; Koutras, A. A.; and Shing, P. B., “Evaluation of Collapse Resistance of Reinforced Masonry Wall Systems by Shake‐Table Tests,” Earthquake Engineering & Structural Dynamics, V. 50, No. 2, 2021, pp. 475-494. doi: 10.1002/eqe.33410.1002/eqe.3342 ↗