Instrumented pyramidal and spherical indentation of polycrystalline graphite

The elastoplastic surface deformation of a polycrystalline graphite was studied by examining the indenter’s geometry dependence of load P versus penetration depth h relation (P–h relation) in instrumented pyramidal/spherical indentation tests. The tetrahedral pyramid indenters included inclined face angles β of 10.0°, 22.0° (Vickers pyramid), and 40.0°. The tip radius of spherical indenters used were 32 μm, 200 μm, 794 μm, 1.59 mm, and 6.35 mm. The true hardness H as a measure for plasticity was singled out of the elastoplastic loading parameter k₁ in the quadratic expression of P = k₁h² and then quantitatively related to the yield stress Y that was determined from the mean contact pressure for spherical indentation at the onset of plastic yielding. The size effect of Y, decreasing with the increase in the tip radius of spherical indenter, is discussed using the model of geometrically necessary dislocations in terms of the material length scales for a plastic field with strain gradient.