Strength and Serviceability of Shear-Critical Post-Tensioned Girders (Open Source)
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Geotechnical Engineering and Soil Stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Castrodale, R. W., and White, C. D., “Extending Span Ranges of Precast Prestressed Concrete Girders,” NCHRP Report 517, Transportation Research Board, Washington, DC, 2004, 603 pp.
2. Collins, M. P., and Mitchell, D., Prestressed Concrete Structures, Prentice Hall, Englewood Cliffs, NJ, 1991, 766 pp.
3. FDOT, “New Directions for Florida Post-Tensioned Bridges,” Florida Department of Transportation, Tallahassee, FL, 2004, 95 pp.
4. Hamilton, H. R.; Rice, J. A.; Abdullah, A. B. M.; Bhatia, R.; Brenkus, N.; and Skelton, D., “Replaceable Unbonded Tendons for Post-Tensioned Bridges,” Florida Department of Transportation, Tallahassee, FL, 2017, 669 pp.
5. AASHTO, “AASHTO LRFD Bridge Design Specifications,” ninth edition, American Association of State Highway and Transportation Officials, Washington, DC, 2020, 1914 pp.
6. AASHTO, “Guide Specifications for Design and Construction of Segmental Concrete Bridges,” second edition, American Association of State Highway and Transportation Officials, Washington, DC, 1999, 96 pp.
7. PCI, “PCI Bridge Design Manual (MNL-133-14),” third edition, Precast/Prestressed Concrete Institute, Chicago, IL, 2014, 1620 pp.
8. EN 1992-1-1:2004, “Eurocode 2: Design of Concrete Structures - Part 1-1: General Rules and Rules for Buildings,” European Committee for Standardization, Brussels, Belgium, 2004, 225 pp.
9. fib, “fib Model Code for Concrete Structures 2010,” International Federation for Structural Concrete, Lausanne, Switzerland, 2013, 434 pp.10.1002/9783433604090 ↗
10. Moore, A.; Williams, C.; Al-Tarafany, D.; Felan, J.; Massey, J.; Nguyen, T.; Schmidt, K.; Wald, D.; Bayrak, O.; Jirsa, J.; and Ghannoum, W., “Shear Behavior of Spliced Post-Tensioned Girders,” Report No. FHWA/TX-14/0-6652-1, Center for Transportation Research, The University of Texas at Austin, Austin, TX, 2015, 220 pp.
11. Skelton, D., and Hamilton, H. R., “Shear Behavior of Webs Post-Tensioned with Tendons Containing Flexible Fillers,” Florida Department of Transportation, Tallahassee, FL, 2021, 198 pp.
12. Vecchio, F. J., and Collins, M. P., “The Modified Compression-Field Theory for Reinforced Concrete Elements Subjected to Shear,” ACI Journal Proceedings, V. 83, No. 2, Mar.-Apr. 1986, pp. 219-231.10.14359/10416 ↗
13. Bentz, E. C.; Vecchio, F. J.; and Collins, M. P., “Simplified Modified Compression Field Theory for Calculating Shear Strength of Reinforced Concrete Elements,” ACI Structural Journal, V. 103, No. 4, July-Aug. 2006, pp. 614-624.10.14359/16438 ↗
14. Muttoni, A.; Burdet, O. L.; and Hars, E., “Effect of Duct Type on the Shear Strength of Thin Webs,” ACI Structural Journal, V. 103, No. 5, Sept.-Oct. 2006, pp. 729-735.10.14359/16925 ↗
15. Wald, D. M.; Moore, A.; Bayrak, O.; and Jirsa, J. O., “Compressive Behavior of Concrete Panels Containing Steel and Plastic Ducts,” ACI Structural Journal, V. 114, No. 5, Sept.-Oct. 2017, pp. 1167-1176. doi: 10.14359/5168972110.14359/51689721 ↗
16. Kuchma, D., “Effect of Ducts on Shear Strength of Prestressed and Non-Prestressed Members [Interview] (15 June 2013),” The University of Texas at Austin, Austin, TX, 2013.
17. WSDOT, “Bridge Design Manual LRFD,” Washington State Department of Transportation, Olympia, WA, 2023, 1050 pp.
18. TxDOT, “Bridge Design Manual - LRFD,” Texas Department of Transportation, Austin, TX, 2021, 95 pp.
19. Garber, D.; Gallardo, J.; Deschenes, D.; Dunkman, D.; and Bayrak, O., “Effect of New Prestress Loss Estimates on Pretensioned Concrete Bridge Girder Design,” Report No. FHWA/TX-12/0-6374-2, Center for Transportation Research, The University of Texas at Austin, Austin, TX, 2013, 300 pp.
20. Han, S.; Zaborac, J.; Webb, Z. D.; Choi, J.; Ferche, A. C.; and Bayrak, O., “Shear Behavior of Spliced Post-Tensioned Girders with Ungrouted Tendons,” Report No. FHWA/TX-22/5-6652-01-1, Center for Transportation Research, The University of Texas at Austin, Austin, TX, 2022, 181 pp.
21. ASTM C39/C39M-14, “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens,” ASTM International, West Conshohocken, PA, 2014, 7 pp.
22. ASTM A615/A615M-20, “Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement,” ASTM International, West Conshohocken, PA, 2020, 8 pp.
23. ASTM A416/A416M-18, “Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete,” ASTM International, West Conshohocken, PA, 2018, 5 pp.
24. AISC, “Steel Construction Manual,” 15th edition, American Institute of Steel Construction, Chicago, IL, 2017, 2324 pp.
25. Moore, A. M.; Williams, C. S.; Massey, J. B.; Bayrak, O.; Ghannoum, W. M.; and Jirsa, J. O., “Shear Behavior of Post-Tensioned Girders,” ACI Structural Journal, V. 114, No. 6, Nov.-Dec. 2017, pp. 1615-1625. doi: 10.14359/5170083510.14359/51700835 ↗
26. ASTM C496-96, “Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens,” ASTM International, West Conshohocken, PA, 1996, 4 pp.
27. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318R-19) (Reapproved 2022),” American Concrete Institute, Farmington Hills, MI, 2019, 624 pp.
28. ACI Committee 224, “Control of Cracking in Concrete Structures (ACI 224R-01) (Reapproved 2008),” American Concrete Institute, Farmington Hills, MI, 2001, 46 pp.
29. Birrcher, D.; Tuchscherer, R.; Huizinga, M.; Bayrak, O.; Wood, S.; and Jirsa, J., “Strength and Serviceability Design of Reinforced Concrete Deep Beams,” Report No. FHWA/TX-09/0-5253-1, Center for Transportation Research, The University of Texas at Austin, Austin, TX, 2009, 400 pp.10.1061/41031(341)175 ↗
30. Wight, J. K., Reinforced Concrete: Mechanics and Design, seventh edition, Prentice Hall, Hoboken, NJ, 2015, 1164 pp.
31. Reineck, K.-H.; Bentz, E.; Fitik, B.; Kuchma, D. A.; and Bayrak, O., “ACI-DAfStb Databases for Shear Tests on Slender Reinforced Concrete Beams with Stirrups,” ACI Structural Journal, V. 111, No. 5, Sept.-Oct. 2014, pp. 1147-1156. doi: 10.14359/5168681910.14359/51686819 ↗
32. Collins, M. P., and Mitchell, D., “Prestressed Concrete Basics,” Canadian Prestressed Concrete Institute, Ottawa, ON, Canada, 1987, 614 pp.
33. Vecchio, F. J., and Collins, M. P., “Compression Response of Cracked Reinforced Concrete,” Journal of Structural Engineering, ASCE, V. 119, No. 12, 1993, pp. 3590-3610. doi: 10.1061/(ASCE)0733-9445(1993)119:12(3590)10.1061/(ASCE)0733-9445(1993)119:12(3590) ↗