Effect of Salt-Frost Cycles and Impact Loads on Residual Axial Capacity of Reinforced Concrete Column

1. Pigeon, M.; Marchand, J.; and Pleau, R., “Frost Resistant Concrete,” Construction and Building Materials, V. 10, No. 5, 1996, pp. 339-348. doi: 10.1016/0950-0618(95)00067-410.1016/0950-0618(95)00067-4 ↗

2. Liu, Z. C., and Hansen, W., “Pore Damage in Cementitious Binders Caused by Deicer Salt Frost Exposure,” Construction and Building Materials, V. 98, Nov. 2015, pp. 204-216. doi: 10.1016/j.conbuildmat.2015.06.06610.1016/j.conbuildmat.2015.06.066 ↗

3. Marchand, J.; Pigeon, M.; Bager, D.; and Talbot, C., “Influence of Chloride Solution Concentration on Deicer Salt Scaling Deterioration of Concrete,” ACI Materials Journal, V. 96, No. 4, July-Aug. 1999, pp. 429-435.10.14359/642 ↗

4. Ge, Y.; Yang, W. C.; Yuan, J.; Zhang, B. S.; and Xiong, A. L., “Deterioration of Concrete Freezing-Thawing in Different Salts Solution,” Key Engineering Materials, Proceedings, V. 405-406, 2009, pp. 315-321. doi: 10.4028/www.scientific.net/KEM.405-406.31510.4028/www.scientific.net/KEM.405-406.315 ↗

5. Powers, T. C., “A Working Hypothesis for Further Studies of Frost Resistance of Concrete,” ACI Journal Proceedings, V. 16, No. 4, Apr. 1945, pp. 245-272.

6. Muttaqin, H.; Hidetoshi, O.; Yasuhiko, S.; and Tamon, U., “Stress-Strain Model of Concrete Damaged by Freezing and Thawing Cycles,” Journal of Advanced Concrete Technology, V. 2, No. 1, 2004, pp. 89-99. doi: 10.3151/jact.2.8910.3151/jact.2.89 ↗

7. Shang, H. S., and Song, Y. P., “Experimental Study of Strength and Deformation of Plain Concrete under Biaxial Compression after Freezing and Thawing Cycles,” Cement and Concrete Research, V. 36, No. 10, 2006, pp. 1857-1864. doi: 10.1016/j.cemconres.2006.05.01810.1016/j.cemconres.2006.05.018 ↗

8. Duan, A.; Jin, W.; and Qian, J., “Effect of Freeze–Thaw Cycles on the Stress–Strain Curves of Unconfined and Confined Concrete,” Materials and Structures, V. 44, No. 7, 2011, pp. 1309-1324. doi: 10.1617/s11527-010-9702-910.1617/s11527-010-9702-9 ↗

9. Xu, S.; Li, A.; Ji, Z.; and Wang, Y., “Seismic Performance of Reinforced Concrete Columns after Freeze–Thaw Cycles,” Construction and Building Materials, V. 102, Jan. 2016, pp. 861-871. doi: 10.1016/j.conbuildmat.2015.10.16810.1016/j.conbuildmat.2015.10.168 ↗

10. Kuosa, H.; Ferreira, R. M.; Holt, E.; Leivo, M.; and Vesikari, E., “Effect of Coupled Deterioration by Freeze–Thaw, Carbonation and Chlorides on Concrete Service Life,” Cement and Concrete Composites, V. 47, Mar. 2014, pp. 32-40. doi: 10.1016/j.cemconcomp.2013.10.00810.1016/j.cemconcomp.2013.10.008 ↗

11. Zhang, P.; Cong, Y.; Vogel, M.; Liu, Z.; and Harald, S., “Müller, Z. Y.; and Zhao, T. J., “Steel Reinforcement Corrosion in Concrete under Combined Actions: The Role of Freeze-Thaw Cycles, Chloride Ingress, and Surface Impregnation,” Construction and Building Materials, V. 148, Sept. 2017, pp. 113-121. doi: 10.1016/j.conbuildmat.2017.05.07810.1016/j.conbuildmat.2017.05.078 ↗

12. Shi, X.; Xie, N.; Fortune, K.; and Gong, J., “Durability of Steel Reinforced Concrete in Chloride Environments: An Overview,” Construction and Building Materials, V. 30, May 2012, pp. 125-138. doi: 10.1016/j.conbuildmat.2011.12.03810.1016/j.conbuildmat.2011.12.038 ↗

13. Xia, J.; Jin, W. L.; and Li, L. Y., “Performance of Corroded Reinforced Concrete Columns under the Action of Eccentric Loads,” Journal of Materials in Civil Engineering, ASCE, V. 28, No. 1, 2016, p. 04015087. doi: 10.1061/(ASCE)MT.1943-5533.000135210.1061/(ASCE)MT.1943-5533.0001352 ↗

14. Wu, X.; Chen, L.; Li, H.; and Xu, J., “Experimental Study of the Mechanical Properties of Reinforced Concrete Compression Members under the Combined Action of Sustained Load and Corrosion,” Construction and Building Materials, V. 202, Mar. 2019, pp. 11-22. doi: 10.1016/j.conbuildmat.2018.12.15610.1016/j.conbuildmat.2018.12.156 ↗

15. Remennikov, A., and Kaewunruen, S., “Impact Resistance of Reinforced Concrete Columns: Experimental Studies and Design Considerations,” Faculty of Engineering-papers., V. 202, No. 5, Jan. 2006, pp. 817-824.

16. Liu, B.; Fan, W.; Guo, W.; Chen, B. S.; and Liu, R., “Experimental Investigation and Improved FE Modeling of Axially-Loaded Circular RC Columns under Lateral Impact Loading,” Engineering Structures, England, V. 152, Dec. 2017, pp. 619-642. doi: 10.1016/j.engstruct.2017.09.00910.1016/j.engstruct.2017.09.009 ↗

17. Cai, J.; Ye, J. B.; Chen, Q. J.; Liu, X. P.; and Wang, Y. Q., “Dynamic Behaviour of Axially-Loaded RC Columns under Horizontal Impact Loading,” Engineering Structures, England, V. 168, Aug. 2018, pp. 684-697. doi: 10.1016/j.engstruct.2018.04.09510.1016/j.engstruct.2018.04.095 ↗

18. Wan, Y. L.; Zhu, L.; Fang, H.; Liu, W. Q.; and Mao, Y. F., “Experimental Testing and Numerical Simulations of Ship Impact on Axially Loaded Reinforced Concrete Piers,” International Journal of Impact Engineering, V. 125, Mar. 2019, pp. 246-262. doi: 10.1016/j.ijimpeng.2018.11.01610.1016/j.ijimpeng.2018.11.016 ↗

19. Zhang, F. R.; Wu, C. Q.; Li, Z. X.; and Zhao, X. L., “Residual Axial Capacity of CFDST Columns Infilled with UHPFRC after Close-Range Blast Loading,” Thin Wall Structures, V. 96, Nov. 2015, pp. 314-327. doi: 10.1016/j.tws.2015.08.02010.1016/j.tws.2015.08.020 ↗

20. Li, B.; Nair, A.; and Kai, Q., “Residual Axial Capacity of Reinforced Concrete Columns with Simulated Blast Damage,” Journal of Performance of Constructed. Facilities, Proceedings, V. 26, No. 3, May-June 2012, pp. 287-299.10.1061/(ASCE)CF.1943-5509.0000210 ↗

21. Roller, C.; Mayrhofer, C.; Riedel, W.; and Thoma, K., “Residual Load Capacity of Exposed and Hardened Concrete Columns under Explosion Loads,” Engineering Structures, V. 5, Oct. 2013, pp. 66-72. doi: 10.1016/j.engstruct.2011.12.00410.1016/j.engstruct.2011.12.004 ↗

22. Echevarria, A.; Zaghi, A. E.; Chiarito, V.; Christenson, R.; and Woodson, S., “Experimental Comparison of the Performance and Residual Capacity of CFFT and RC Bridge Columns Subjected to Blasts,” Journal of Bridge Engineering, ASCE, V. 21, No. 1, 2016, p. 04015026. doi: 10.1061/(ASCE)BE.1943-5592.000076210.1061/(ASCE)BE.1943-5592.0000762 ↗

23. GB 175-2007, Common Portland Cement, Standards Press of China, Beijing, China, 2007.

24. JGJ 52, “Standard for Technical Requirements and Test Method of Sand and Crushed Stone (or Gravel) for Ordinary Concrete,” Ministry of Construction of the People’s Republic of China, Beijing, China, 2006.

25. JGJ 55, “Specification for Mix Proportion Design of Ordinary Concrete,” Ministry of Housing and Urban-Rural Construction, Beijing, China, 2011.

26. GB/T 50080, “Standard for Test Method of Performance on Ordinary Fresh Concrete,” Standards Press of China, Beijing, China, 2002.

27. GB/T 228.1, “Metallic Materials – Tensile Testing – Part 1: Method of Test at Room Temperature,” Standards Press of China, Beijing, China, 2010.

28. GB 50010, “Code for Design of Concrete Structures,” Standards Press of China, Beijing, China, 2010.

29. GB/T 50082, “Standard for Test Methods Long-Term Performance and Durability of Ordinary Concrete,” Standards Press of China, Beijing, China, 2009.

30. Zhang, P.; Wittmann, F. H.; Vogel, M.; Muller, H. S.; and Zhao, T. J., “Influence of Freeze-Thaw Cycles on Capillary Absorption and Chloride Penetration Into Concrete,” Cement and Concrete Research, V. 100, Oct. 2017, pp. 60-67. doi: 10.1016/j.cemconres.2017.05.01810.1016/j.cemconres.2017.05.018 ↗

31. Hu, J., and Wu, J., “Mechanical Properties and Uni-Axial Compression Stress-Strain Relation of Recycled Coarse Aggregate Concrete Subjected to Salt-Frost Cycles,” Construction and Building Materials, V. 197, Feb. 2019, pp. 652-666. doi: 10.1016/j.conbuildmat.2018.11.21310.1016/j.conbuildmat.2018.11.213 ↗

32. Kishi, N., and Mikami, H., “Empirical Formulas for Designing Reinforced Concrete Beams under Impact Loading,” ACI Structural Journal, V. 109, No. 4, July-Aug. 2012, pp. 509-519.10.14359/51683870 ↗