Numerical investigating the behaviors of texture transition in polycrystalline pure aluminum during asymmetric accumulative roll-bonding (AARB)
Source abstract
Abstract
After accumulative roll-bonding (ARB), shear texture and rolling texture develop at the surface and center of aluminum alloys, respectively, and texture transition between them occurs due to the stacking and rolling in the next cycle. In this report, crystal plasticity modeling of aluminum texture after asymmetric accumulative roll-bonding (AARB), which combines ARB and asymmetric rolling, was performed to investigate the texture transition. After being validated by the experimental observations, the numerically predicted overall textures and through-thickness texture were thoroughly characterized. The behaviors of texture transition between rolling texture and shear texture through the thickness were analyzed and the history of texture evolution in a particular layer after multiple ARB cycles was traced. Finally, the effect of ARB stacking pattern and asymmetric ratios on the behaviors of texture transition was discussed. This study is of help in understanding the behaviors of texture transition and tailoring the texture distribution.Graphic Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. R.Z. Valiev, B. Straumal, T.G. Langdon, Using severe plastic deformation to produce nanostructured materials with superior properties. Annu. Rev. Mater. Res. 52, 357–382 (2022). https://doi.org/10.1146/annurev-matsci-081720-12324810.1146/annurev-matsci-081720-123248 ↗
2. K. Edalati, A. Bachmaier, V.A. Beloshenko, Y. Beygelzimer, V.D. Blank, W.J. Botta, K. Bryła, J. Čížek, S. Divinski, N.A. Enikeev, Y. Estrin, G. Faraji, R.B. Figueiredo, M. Fuji, T. Furuta, T. Grosdidier, J. Gubicza, A. Hohenwarter, Z. Horita, J. Huot, Y. Ikoma, M. Janeček, M. Kawasaki, P. Král, S. Kuramoto, T.G. Langdon, D.R. Leiva, V.I. Levitas, A. Mazilkin, M. Mito, H. Miyamoto, T. Nishizaki, R. Pippan, V.V. Popov, E.N. Popova, G. Purcek, O. Renk, Á. Révész, X. Sauvage, V. Sklenicka, W. Skrotzki, B.B. Straumal, S. Suwas, L.S. Toth, N. Tsuji, R.Z. Valiev, G. Wilde, M.J. Zehetbauer, X. Zhu, Nanomaterials by severe plastic deformation: review of historical developments and recent advances. Mater. Res. Lett. 10, 163–256 (2022). https://doi.org/10.1080/21663831.2022.202977910.1080/21663831.2022.2029779 ↗
3. K.R. Ramkumar, I. Dinaharan, N. Murugan, H.S. Kim, Development of aluminum matrix composites through accumulative roll bonding: a review. J. Mater. Sci. 59, 8606–8649 (2024). https://doi.org/10.1007/s10853-024-09682-610.1007/s10853-024-09682-6 ↗
4. M. Naseri, M. Reihanian, A.O. Moghaddam, D. Gholami, S. Hosseini, M. Alvand, E. Borhani, E. Trofimov, Improving strength-ductility synergy of nano/ultrafine-structured Al/Brass composite by cross accumulative roll bonding process. J. Mater. Res. Technol. 26, 6794–6806 (2023). https://doi.org/10.1016/j.jmrt.2023.09.04610.1016/j.jmrt.2023.09.046 ↗
5. H. Yu, K. Tieu, S. Hadi, C. Lu, A. Godbole, C. Kong, High strength and ductility of ultrathin laminate foils using accumulative roll bonding and asymmetric rolling. Metall. Mater. Trans. A 46, 869–879 (2015). https://doi.org/10.1007/s11661-014-2640-310.1007/s11661-014-2640-3 ↗
6. S. Mroz, A. Wierzba, A. Stefanik, P. Szota, Effect of asymmetric accumulative roll-bonding process on the microstructure and strength evolution of the AA1050/AZ31/AA1050 multilayered composite materials. Materials (2020). https://doi.org/10.3390/ma1323540110.3390/ma13235401 ↗
7. G. Vincze, F.J.P. Simões, M.C. Butuc, Asymmetrical rolling of aluminum alloys and steels: a review. Metals (2020). https://doi.org/10.3390/met1009112610.3390/met10091126 ↗
8. B. Beausir, S. Biswas, D.I. Kim, L.S. Tóth, S. Suwas, Analysis of microstructure and texture evolution in pure magnesium during symmetric and asymmetric rolling. Acta Mater. 57, 5061–5077 (2009). https://doi.org/10.1016/j.actamat.2009.07.00810.1016/j.actamat.2009.07.008 ↗
9. L. Chen, Q. Shi, D. Chen, S. Zhou, J. Wang, X. Luo, Research of textures of ultrafine grains pure copper produced by accumulative roll-bonding. Mater. Sci. Eng., A 508, 37–42 (2009). https://doi.org/10.1016/j.msea.2008.12.01810.1016/j.msea.2008.12.018 ↗
10. L. Su, C. Lu, A.A. Gazder, A.A. Saleh, G. Deng, K. Tieu, H. Li, Shear texture gradient in AA6061 aluminum alloy processed by accumulative roll bonding with high roll roughness. J. Alloys Compd. 594, 12–22 (2014). https://doi.org/10.1016/j.jallcom.2014.01.12510.1016/j.jallcom.2014.01.125 ↗
11. S. Li, F. Sun, H. Li, Observation and modeling of the through-thickness texture gradient in commercial-purity aluminum sheets processed by accumulative roll-bonding. Acta Mater. 58, 1317–1331 (2010). https://doi.org/10.1016/j.actamat.2009.10.03610.1016/j.actamat.2009.10.036 ↗
12. R.P. Godoi, B.D. Zanquetta, J.B. Rubert, R.E. Bolmaro, M.C. Avalos, V.L. Sordi, A.M. Kliauga, Analysis of the strain distribution and texture measurements in asymmetric rolling (AR) and asymmetric accumulative roll bonding (AARB). Mater. Sci. Forum 1016, 715–724 (2021). https://doi.org/10.4028/www.scientific.net/MSF.1016.71510.4028/www.scientific.net/MSF.1016.715 ↗
13. R.P. de Godoi, D.C. Camilo Magalhães, M. Avalos, R.E. Bolmaro, V.L. Sordi, A.M. Kliauga, Microstructure, texture and interface integrity in sheets processed by Asymmetric Accumulative Roll-Bonding. Mater. Sci. Eng., A 771, 138634 (2020). https://doi.org/10.1016/j.msea.2019.13863410.1016/j.msea.2019.138634 ↗
14. M. Ebrahimi, Q. Wang, Accumulative roll-bonding of aluminum alloys and composites: an overview of properties and performance. J. Mater. Res. Technol. 19, 4381–4403 (2022). https://doi.org/10.1016/j.jmrt.2022.06.17510.1016/j.jmrt.2022.06.175 ↗
15. D.C.C. Magalhães, O.M. Cintho, J.B. Rubert, V.L. Sordi, A.M. Kliauga, The role of shear strain during accumulative roll-bonding of multilayered composite sheets: pattern formation, microstructure and texture evolution. Mater. Sci. Eng., A 796, 140055 (2020). https://doi.org/10.1016/j.msea.2020.14005510.1016/j.msea.2020.140055 ↗
16. N. Kamikawa, N. Tsuji, X. Huang, N. Hansen, Through-thickness characterization of microstructure and texture in high purity aluminum processed to high strain by accumulative roll-bonding. Mater. Trans. 48, 1978–1985 (2007). https://doi.org/10.2320/matertrans.MA20070210.2320/matertrans.MA200702 ↗
17. Q. Liu, S. Wu, H. Tu, H. Zhang, H. Wang, A crystal plasticity FEM investigation of texture distribution and plastic deformation in commercial pure aluminum after asymmetric rolling. Metallogr. Microstruct. Anal. 14, 96–105 (2025). https://doi.org/10.1007/s13632-025-01168-410.1007/s13632-025-01168-4 ↗
18. X. Zhou, S. Zan, Y. Zeng, R. Guo, G. Wang, T. Wang, L. Zhao, M. Chen, Comprehensive study of plastic deformation mechanism of polycrystalline copper using crystal plasticity finite element. J. Mater. Res. Technol. 30, 9221–9236 (2024). https://doi.org/10.1016/j.jmrt.2024.06.00610.1016/j.jmrt.2024.06.006 ↗
19. N. Kamikawa, T. Sakai, N. Tsuji, Effect of redundant shear strain on microstructure and texture evolution during accumulative roll-bonding in ultralow carbon IF steel. Acta Mater. 55, 5873–5888 (2007). https://doi.org/10.1016/J.ACTAMAT.2007.07.00210.1016/J.ACTAMAT.2007.07.002 ↗
20. S. Lihong, Microstructure, Texture and Vacancy-type Defects in Severe Plastic Deformed Aluminium Alloys, University of Wollongong, (2012)
21. H. Yu, C. Lu, A.K. Tieu, A. Godbole, L. Su, Y. Sun, M. Liu, D. Tang, C. Kong, Fabrication of ultra-thin nanostructured bimetallic foils by accumulative roll bonding and asymmetric rolling. Sci. Rep. (2013). https://doi.org/10.1038/srep0237310.1038/srep02373 ↗
22. O. Engler, C.N. Tomé, M.-Y. Huh, A study of through-thickness texture gradients in rolled sheets. Metall. Mater. Trans. A 31, 2299–2315 (2000). https://doi.org/10.1007/s11661-000-0146-710.1007/s11661-000-0146-7 ↗
23. H. Wang, C. Lu, K. Tieu, A crystal plasticity FEM investigation of a Cu single crystal processed by accumulative roll-bonding. J. Mater. Res. Technol. 8, 5057–5065 (2019). https://doi.org/10.1016/j.jmrt.2019.05.01910.1016/j.jmrt.2019.05.019 ↗
24. H. Su, L. Hou, Q. Tian, Y. Wang, L. Zhuang, Understanding the bending behavior and through-thickness strain distribution during asymmetrical rolling of high-strength aluminium alloy plates. J. Mater. Res. Technol. 22, 1462–1475 (2023). https://doi.org/10.1016/j.jmrt.2022.12.02910.1016/j.jmrt.2022.12.029 ↗
25. H. Wang, C. Lu, K. Tieu, P. Wei, H. Yu, Texture stability and transition in an accumulative roll-bonding-processed aluminum single crystal. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 50, 1611–1615 (2019). https://doi.org/10.1007/s11661-019-05114-210.1007/s11661-019-05114-2 ↗
26. D. Shore, L.A.I. Kestens, J. Sidor, P. Van Houtte, A. Van Bael, Process parameter influence on texture heterogeneity in asymmetric rolling of aluminium sheet alloys. Int. J. Mater. Form. 11, 297–309 (2018). https://doi.org/10.1007/s12289-016-1330-710.1007/s12289-016-1330-7 ↗
27. J.H. Cho, H.W. Kim, C.Y. Lim, S.B. Kang, Microstructure and mechanical properties of Al-Si-Mg alloys fabricated by twin roll casting and subsequent symmetric and asymmetric rolling. Met. Mater. Int. 20, 647–652 (2014). https://doi.org/10.1007/s12540-014-4009-y10.1007/s12540-014-4009-y ↗
28. Y. Huang, A user-material subroutine incorporating single crystal plasticity in the ABAQUS finite element program a user-material subroutine incorporating single crystal plasticity in the ABAQUS finite element PROORAM, (1991)
29. D. Peirce, R.J. Asaro, A. Needleman, Material rate dependence and localized deformation in crystalline solids, n.d.
30. T. Wu, J.L. Bassani, C. Laird, Latent hardening in single crystals - I Theory and experiments. Proc. R. Soc. Lond. A Math. Phys. Sci. 435, 1–19 (1997). https://doi.org/10.1098/rspa.1991.012710.1098/rspa.1991.0127 ↗
31. H. Wang, C. Lu, K. Tieu, Y. Liu, J. Mater. Sci. Technol. 76, 231–246 (2021). https://doi.org/10.1016/J.JMST.2020.10.02010.1016/J.JMST.2020.10.020 ↗