Influence of modified halloysite nanotube on the properties of poly(ether ether ketone)

1. T.K. Maiti, J. Singh, P. Dixit, J. Majhi, S. Chattopadhyay, Enhancing mechanical and interfacial properties of PEEK/epoxy/SWCNT composites employing aromatic hydroxyl and amine-functionalized SWCNTs. Chem. Eng. J. Adv. 10, 100274 (2022). https://doi.org/10.1016/j.ceja.2022.10027410.1016/j.ceja.2022.100274 ↗

2. Y. Yan, C. Jiang, Y. Huo, C. Li, Preparation and tribological behaviours of lubrication-enhanced PEEK composites. Appl. Sci. 10, 7536 (2020). https://doi.org/10.3390/app1021753610.3390/app10217536 ↗

3. C. Liao, Y. Li, S.C. Tjong, Polyetheretherketone and its composites for bone replacement and regeneration. Polymer 12, 2858 (2020). https://doi.org/10.3390/polym1212285810.3390/polym12122858 ↗

4. L. Guimaraes, A.N. Enyashin, G. Seifert, H.A. Duarte, Structural, electronic, and mechanical properties of single-walled halloysite nanotube models. J. Phys. Chem. C 114, 11358–11363 (2010). https://doi.org/10.1021/jp100902e10.1021/jp100902e ↗

5. T.S. Gaaz, A.B. Sulong, M.N. Akhtar, A.A.H. Kadhum, A.B. Mohamad, A.A. Al-Amiery, Properties and applications of polyvinyl alcohol, halloysite nanotubes and their nanocomposites. Molecules 20, 22833–22847 (2015)10.3390/molecules201219884 ↗

6. A. Ahamad, P. Kumar, Mechanical and thermal performance of PEEK/PEI blend matrix reinforced with surface modified halloysite nanotubes. J. Thermoplast. Compos. Mater. (2021). https://doi.org/10.1177/0892705721102862910.1177/08927057211028629 ↗

7. M.S. Bakshi, S. Kattimani, Study of mechanical and dynamic mechanical behavior of halloysite nanotube-reinforced multiscale syntactic foam. J. App. Poly. Sci. (2020). https://doi.org/10.1002/app.4985510.1002/app.49855 ↗

8. E.G. Bediako, E. Nyankson, D.D. Arhin, B.A. Tuffour, D. Lukowiec, B. Tomiczek, A. Yaya, J.K. Efavi, Modified halloysite nanoclay as a vehicle for sustained drug delivery. Heliyon 4, e00689 (2018). https://doi.org/10.1016/j.heliyon.2018.e0068910.1016/j.heliyon.2018.e00689 ↗

9. H. Asgar, J. Jin, J. Miller, I. Kuzmenko, G. Gadikota, Contrasting thermally-induced structural and microstructural evolution of alumino-silicates with tubular and planar arrangements: case study of halloysite and kaolinite. Colloids Surfaces A Physicochem. Eng. Asp. 613, 126106 (2021)10.1016/j.colsurfa.2020.126106 ↗

10. T.S. Gaaz, A.B. Sulong, A.A.H. Kadhum, M.H. Nassir, A.A. Al-Amiery, Impact of sulfuric acid treatment of halloysite on physico-chemic property modification. Materials 9, 620 (2016). https://doi.org/10.3390/ma908062010.3390/ma9080620 ↗

11. C. Cheng, W. Song, Q. Zhao, H. Zhang, Halloysite nanotubes in polymer science: purification, characterization, modification and applications. Nanotechnol. Rev. 9, 323–344 (2020). https://doi.org/10.1515/ntrev-2020-002410.1515/ntrev-2020-0024 ↗

12. M.K. Kundu, P. Pal, G. Hatui, C.K. Das, S.S. Kalra, Investigation on crystallinity, performance and processability of naturally occurring halloysite nanotubes compatibilized sPS/LCP thermoplastic nanocomposites. J. Polym. Res. 22, 29 (2015). https://doi.org/10.1007/s10965-015-0665-y10.1007/s10965-015-0665-y ↗

13. P. Rybinski, G. Janowska, M. Jozwiak, Thermal properties and flammability of nanocomposites based on diene rubbers and naturally occurring and activated halloysite nanotubes. J. Therm. Anal. Calorim. 107, 1243–1249 (2012)10.1007/s10973-011-1787-z ↗

14. G. Zhang, B. Wetzel, B. Jim, W. Oesterle, Impact of counterface topography on the formation mechanisms of nanostructured tribofilm of PEEK hybrid nanocomposites. Tribol. Internat. 83, 156–165 (2015). https://doi.org/10.1016/j.triboint.2014.11.01510.1016/j.triboint.2014.11.015 ↗

15. Y. Wang, J. Shen, M. Yan, X. Tian, Poly ether ether ketone and its composite powder prepared by thermally induced phase separation for high temperature selective laser sintering. Mater. Design 201, 109510 (2021). https://doi.org/10.1016/j.matdes.2021.10951010.1016/j.matdes.2021.109510 ↗

16. A.A. Atienza, L. Chen, V.S. Miguel, A. Ridruejo, J.P.F. Blazquez, Fabrication and characterization of PEEK/PEI multilayer composites. Polymers 12, 2765 (2020). https://doi.org/10.3390/polym1212276510.3390/polym12122765 ↗

17. M. Doumeng, L. Makhlouf, F. Berthet, O. Marsan, K. Delbe, J. Denape, F. Chabert, A comparative study of the crystallinity of polyetheretherketone by using density, DSC, XRD, and Raman spectroscopy techniques. Polym. Test. 93, 106878 (2021). https://doi.org/10.1016/j.polymertesting.2020.10687810.1016/j.polymertesting.2020.106878 ↗

18. H. Lyu, N. Jiang, Y. Li, D. Zhang, Enhancing CF/PEEK interfacial adhesion by modified PEEK grafted with carbon nanotubes. Compos. Sci. Techn. 210, 108831 (2021). https://doi.org/10.1016/j.compscitech.2021.10883110.1016/j.compscitech.2021.108831 ↗

19. A. Ahmad, K.N. Pandey, S. Mishra, A.K. Sahu, R. Vijayvargiy, J.S.P. Rai, Comparative study on mechanical, thermal and morphological properties of nanocomposites based on polyetherimide (PEI)/silicone rubber reinforced with different nanofillers. Polym. Bull. (2023). https://doi.org/10.1017/s00289-023-04704-w10.1017/s00289-023-04704-w ↗

20. P. Pal, M.K. Kundu, A. Malas, C.K. Das, Compatibilizing effect of halloysite nanotubes in polar-nonpolar hybrid system. J. App. Poly. Sci. (2014). https://doi.org/10.1002/APP.3958710.1002/APP.39587 ↗

21. A.M. Diez-Pascual, A.L. Diez-Vicente, Nano-TiO2 reinforced PEEK/PEI blends as biomaterials for load-bearing implant applications. ACS Appl. Mater. Interfaces (2015). https://doi.org/10.1021/acsami.5b0021010.1021/acsami.5b00210 ↗

22. ASTM, D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials (ASTM International, West Conshohocken, 1997)

23. R.M. Mishra, J.S.P. Rai, Polyetherimide (PEI)/silicone rubber composite reinforced with nanosilica particles. Int. J. Sci. Tech. Res. 5, 176–180 (2016)

24. C.M. Ricardo, A. de Almeida Prado Luis, S. Karl, Polyamide-12/functionalized carbon nanofiber composites: evaluation of thermal and mechanical properties. Macromol. Macromol. Mater. Eng. 295, 397–405 (2010)10.1002/mame.200900316 ↗

25. G.C. da Vasconcelos, R.L. Mazur, B. Ribeiro, Evaluation of decomposition kinetics of poly (ether-ether-ketone) by thermogravimetric analysis. Mater. Res. 17, 227 (2013)10.1590/S1516-14392013005000202 ↗

26. A.A. Atienza, L. Chen, V.S. Miguel, A.R. Juan, P.F. Blazquez, Fabrication and characterization of PEEK/PEI multilayer composites. Polymer 12, 2765 (2020)10.3390/polym12122765 ↗

27. ASTM, D638-22 Standard Test Method for Tensile Properties of Plastics (ASTM International, West Conshohocken, 2014)

28. ASTM, D256-10 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics (ASTM International, West Conshohocken, 2018)