The influence of cold rolling and hydroxyapatite coating on the mechanostructure, corrosion resistance, cell viability, and antibacterial activity of ZnCu biodegradable implants
Source abstract
Abstract
Zinc (Zn) and its alloys exhibit great potential for utilization in biodegradable bone implants. Zn-1Cu biodegradable alloy was produced and were cold rolled at two different deformation rates of 47 and 61%. The samples have been bioceramic coated with the sol–gel method and microstructure-mechanical property changes, corrosion behavior and biocompatibility of the samples were investigated. They were characterized by Optical, SEM, XRD and wettability analysis. The rolled samples showed a significant increase in hardness when compared to the non-rolled samples. The unrolled and 47% rolled samples showed better corrosion resistance compared to 61% rolled samples. Antibacterial effects of the base and sol–gel-coated groups showed higher cell viability ratios than the uncoated groups. Cell viability increased significantly in 47% of the rolled samples after 24, 48, and 72 h, however decreased by up to 70% in 61% of the rolled samples. Graphical abstract: (Figure presented.).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Orthopaedic implants and arthroplasty · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. L. Ghasemi-Mobarakeh, D. Kolahreez, S. Ramakrishna, D. Williams, Key terminology in biomaterials and biocompatibility. Curr. Opin. Biomed. Eng. 10, 45–50 (2019). https://doi.org/10.1016/J.COBME.2019.02.00410.1016/J.COBME.2019.02.004 ↗
2. E. Marin, F. Boschetto, G. Pezzotti, Biomaterials and biocompatibility: an historical overview. J. Biomed. Mater. Res. A 108(8), 1617–1633 (2020). https://doi.org/10.1002/JBM.A.3693010.1002/JBM.A.36930 ↗
3. N. Aslan, B. Aksakal, M.E. Aksoy, Boron-incorporated biocomposite coatings on 316L and NiTi alloys: Enhanced structural, antibacterial activity, and cell viability performances. Proc Inst. Mech. Eng. Part H 236(10), 1572–1580 (2022). https://doi.org/10.1177/0954411922112206110.1177/09544119221122061 ↗
4. Y.X. Yin et al., “Hemocompatibility of biodegradable Zn-0.8 wt% (Cu, Mn, Li) alloys. Mater. Sci. Eng. C. Mater. Biol. Appl. (2019). https://doi.org/10.1016/J.MSEC.2019.10989610.1016/J.MSEC.2019.109896 ↗
5. H. Yang et al., Evolution of the degradation mechanism of pure zinc stent in the one-year study of rabbit abdominal aorta model. Biomaterials 145, 92–105 (2017). https://doi.org/10.1016/J.BIOMATERIALS.2017.08.02210.1016/J.BIOMATERIALS.2017.08.022 ↗
6. H.F. Li, Z.Z. Shi, L.N. Wang, Opportunities and challenges of biodegradable Zn-based alloys. J. Mater. Sci. Technol. 46, 136–138 (2020). https://doi.org/10.1016/J.JMST.2019.12.01410.1016/J.JMST.2019.12.014 ↗
7. M. Bahraminasab, B.B. Sahari, K.L. Edwards, F. Farahmand, M. Arumugam, Aseptic loosening of femoral components—materials engineering and design considerations. Mater. Des. 44, 155–163 (2013). https://doi.org/10.1016/J.MATDES.2012.07.06610.1016/J.MATDES.2012.07.066 ↗
8. C. Godavitarne, A. Robertson, J. Peters, B. Rogers, Biodegradable materials. Orthop. Trauma 31(5), 316–320 (2017). https://doi.org/10.1016/J.MPORTH.2017.07.01110.1016/J.MPORTH.2017.07.011 ↗
9. M. Moravej, D. Mantovani, Biodegradable metals for cardiovascular stent application: interests and new opportunities. Int. J. Mol. Sci. 12(7), 4250–4270 (2011). https://doi.org/10.3390/IJMS1207425010.3390/IJMS12074250 ↗
10. Y. Yun et al., Revolutionizing biodegradable metals. Mater. Today 12(10), 22–32 (2009). https://doi.org/10.1016/S1369-7021(09)70273-110.1016/S1369-7021(09)70273-1 ↗
11. P.R. Kowey, Novel therapeutic targets for antiarrhythmic drugs. Circulation 123(7), 8 (2011). https://doi.org/10.1161/CIRCULATIONAHA.110.98003710.1161/CIRCULATIONAHA.110.980037 ↗
12. P.K. Bowen et al., Biodegradable metals for cardiovascular stents: from clinical concerns to recent Zn-alloys. Adv. Healthc. Mater. 5(10), 1121–1140 (2016). https://doi.org/10.1002/ADHM.20150101910.1002/ADHM.201501019 ↗
13. E. Aghion, G. Levy, S. Ovadia, In vivo behavior of biodegradable Mg-Nd-Y-Zr-Ca alloy. J. Mater. Sci. Mater. Med. 23(3), 805–812 (2012). https://doi.org/10.1007/S10856-011-4536-810.1007/S10856-011-4536-8 ↗
14. T. Savaşkan, G. Pürçek, S. Murphy, Sliding wear of cast zinc-based alloy bearings under static and dynamic loading conditions. Wear 252(9–10), 693–703 (2002). https://doi.org/10.1016/S0043-1648(01)00876-610.1016/S0043-1648(01)00876-6 ↗
15. Y. Torres, J.J. Pavón, J.A. Rodríguez, Processing and characterization of porous titanium for implants by using NaCl as space holder. J. Mater. Process. Technol. 212(5), 1061–1069 (2012). https://doi.org/10.1016/J.JMATPROTEC.2011.12.01510.1016/J.JMATPROTEC.2011.12.015 ↗
16. E. Mostaed, M. Sikora-Jasinska, J.W. Drelich, M. Vedani, Zinc-based alloys for degradable vascular stent applications. Acta Biomater. 71, 1–23 (2018). https://doi.org/10.1016/J.ACTBIO.2018.03.00510.1016/J.ACTBIO.2018.03.005 ↗
17. R. Yue et al., Microstructure, mechanical properties and in vitro degradation behavior of novel Zn-Cu-Fe alloys. Mater Charact 134, 114–122 (2017). https://doi.org/10.1016/J.MATCHAR.2017.10.01510.1016/J.MATCHAR.2017.10.015 ↗
18. E. Mostaed, M.S. Ardakani, M. Sikora-Jasinska, J.W. Drelich, Precipitation induced room temperature superplasticity in Zn-Cu alloys. Mater. Lett. 244, 203–206 (2019). https://doi.org/10.1016/J.MATLET.2019.02.08410.1016/J.MATLET.2019.02.084 ↗
19. A. Kafri, S. Ovadia, G. Yosafovich-Doitch, E. Aghion, The effects of 4%fe on the performance of pure zinc as biodegradable implant material. Ann. Biomed. Eng. 47(6), 89 (2019). https://doi.org/10.1007/S10439-019-02245-W10.1007/S10439-019-02245-W ↗
20. B. Jia et al., In vitro and in vivo studies of Zn-Mn biodegradable metals designed for orthopedic applications. Acta Biomater. 108, 358–372 (2020). https://doi.org/10.1016/J.ACTBIO.2020.03.00910.1016/J.ACTBIO.2020.03.009 ↗
21. H. Kabir, K. Munir, C. Wen, Y. Li, Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives. Bioact. Mater. 6(3), 836–879 (2021). https://doi.org/10.1016/J.BIOACTMAT.2020.09.01310.1016/J.BIOACTMAT.2020.09.013 ↗
22. A. Kumar, S. Kargozar, F. Baino, S.S. Han, Additive manufacturing methods for producing hydroxyapatite and hydroxyapatite-based composite scaffolds: a review. Front. Mater. 6, 313 (2019)10.3389/fmats.2019.00313 ↗
23. D. Arcos, M. Vallet-Regí, Substituted hydroxyapatite coatings of bone implants. J. Mater. Chem. B 8(9), 1781–1800 (2020)10.1039/C9TB02710F ↗
24. P. Li et al., Investigation of zinc-copper alloys as potential materials for craniomaxillofacial osteosynthesis implants. Mater. Sci. Eng. C 103, 109826 (2019). https://doi.org/10.1016/J.MSEC.2019.10982610.1016/J.MSEC.2019.109826 ↗
25. D. Palai et al., Influence of copper on the microstructural, mechanical, and biological properties of commercially pure Zn-based alloys for a potential biodegradable implant. ACS Biomater. Sci. Eng. 8(4), 1443–1463 (2022). https://doi.org/10.1021/ACSBIOMATERIALS.1C0111110.1021/ACSBIOMATERIALS.1C01111 ↗
26. C. Shuai, Y. Cheng, Y. Yang, S. Peng, W. Yang, F. Qi, Laser additive manufacturing of Zn-2Al part for bone repair: formability, microstructure and properties. J. Alloys Compd. 798, 606–615 (2019). https://doi.org/10.1016/J.JALLCOM.2019.05.27810.1016/J.JALLCOM.2019.05.278 ↗
27. C. Shuai et al., A peritectic phase refines the microstructure and enhances Zn implants. J. Mater. Res. Technol. 9(3), 2623–2634 (2020). https://doi.org/10.1016/J.JMRT.2020.04.03710.1016/J.JMRT.2020.04.037 ↗
28. J. Niu et al., Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application. Mater. Sci. Eng. C 69, 407–413 (2016). https://doi.org/10.1016/J.MSEC.2016.06.08210.1016/J.MSEC.2016.06.082 ↗
29. L. Chen, X. Ma, Z. Ma, D. Lu, B. Hou, Study on microstructure and corrosion resistance of high-hardness Zn-1.0Cu-1.0Ti alloy. Mater Charact 178, 111283 (2021). https://doi.org/10.1016/J.MATCHAR.2021.11128310.1016/J.MATCHAR.2021.111283 ↗
30. A. Kazemi-Navaee, R. Jamaati, H.J. Aval, Asymmetric cold rolling of AA7075 alloy: the evolution of microstructure, crystallographic texture, and mechanical properties. Mater. Sci. Eng. A 824, 8 (2021). https://doi.org/10.1016/J.MSEA.2021.14180110.1016/J.MSEA.2021.141801 ↗
31. J. Jiang, H. Huang, J. Niu, Z. Jin, M. Dargusch, G. Yuan, Characterization of nano precipitate phase in an as-extruded Zn-Cu alloy. Scr. Mater. 200, 113907 (2021). https://doi.org/10.1016/J.SCRIPTAMAT.2021.11390710.1016/J.SCRIPTAMAT.2021.113907 ↗
32. J. Cheng, B. Liu, Y.H. Wu, Y.F. Zheng, Comparative in vitro study on pure metals (Fe, Mn, Mg, Zn and W) as biodegradable metals. J. Mater. Sci. Technol. 29(7), 619–627 (2013). https://doi.org/10.1016/J.JMST.2013.03.01910.1016/J.JMST.2013.03.019 ↗
33. D.K. Pathak, P.M. Pandey, Evaluation of in vitro corrosion behavior of zinc–hydroxyapatite and zinc–hydroxyapatite–iron as biodegradable composites. J. Biomed. Mater. Res. Part 109(3), 436–450 (2021). https://doi.org/10.1002/JBM.B.3471210.1002/JBM.B.34712 ↗
34. J. Lin et al., A biodegradable Zn-1Cu-0.1Ti alloy with antibacterial properties for orthopedic applications. Acta Biomater. 106, 410–427 (2020). https://doi.org/10.1016/J.ACTBIO.2020.02.01710.1016/J.ACTBIO.2020.02.017 ↗
35. M. Fan et al., Biocompatibility of zinc matrix biodegradable composites reinforced by graphene nanosheets. Mater. 15, 6481 (2022). https://doi.org/10.3390/MA1518648110.3390/MA15186481 ↗
36. S. Liu, S.B. Xue, P. Xue, D.X. Luo, Present status of Sn–Zn lead-free solders bearing alloying elements. J. Mater. Sci. Mater. Electron. 26(7), 4389–4411 (2015). https://doi.org/10.1007/S10854-014-2659-710.1007/S10854-014-2659-7 ↗
37. S. Amirkhanlou, M.R. Rezaei, B. Niroumand, M.R. Toroghinejad, High-strength and highly-uniform composites produced by compocasting and cold rolling processes. Mater. Des. 32(4), 2085–2090 (2011). https://doi.org/10.1016/J.MATDES.2010.11.04610.1016/J.MATDES.2010.11.046 ↗
38. B.J. Basu, V. Hariprakash, S.T. Aruna, R.V. Lakshmi, J. Manasa, B.S. Shruthi, Effect of microstructure and surface roughness on the wettability of superhydrophobic Sol-gel nanocomposite coatings. J. Sol-Gel Sci. Technol. 56(3), 278–286 (2010). https://doi.org/10.1007/S10971-010-2304-8/METRICS10.1007/S10971-010-2304-8/METRICS ↗
39. S. Cihangir, Greening industrially applied toxic cadmium plating with γ-Ni2Zn11 alloy in deep eutectic solvents: promising electroplating efficiency and chemical corrosion resistance. Adv. Eng. Mater. 25(20), 2300731 (2023). https://doi.org/10.1002/ADEM.20230073110.1002/ADEM.202300731 ↗
40. S. Cihangir, Y. Say, İ Ozkul, O. Guler, S.H. Guler, Microstructure and corrosion investigation of FeCoCrNiMo0,5(MnAl)0,3 high entropy alloy produced by 316 L stainless steel scrap. Mater. Today Commun. 33, 104360 (2022). https://doi.org/10.1016/J.MTCOMM.2022.10436010.1016/J.MTCOMM.2022.104360 ↗
41. Y. Say, B. Aksakal, Effects of hydroxyapatite/Zr and bioglass/Zr coatings on morphology and corrosion behaviour of Rex-734 alloy. J. Mater. Sci. Mater. Med. 27(6), 89 (2016). https://doi.org/10.1007/S10856-016-5716-310.1007/S10856-016-5716-3 ↗
42. Z. Tang et al., Potential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications. J. Mech. Behav. Biomed. Mater. 72, 182–191 (2017). https://doi.org/10.1016/J.JMBBM.2017.05.01310.1016/J.JMBBM.2017.05.013 ↗
43. “ISO 10993-5:2009-Biological evaluation of medical devices—Part 5: Tests for in vitro cytotoxicity.” Accessed: Nov. 14, 2023. Available: https://www.iso.org/standard/36406.html
44. Y. Shi et al., Surface modification on biodegradable zinc alloys. J. Mater. Res. Technol. 25, 3670–3687 (2023). https://doi.org/10.1016/J.JMRT.2023.06.14910.1016/J.JMRT.2023.06.149 ↗
45. R. Humphries, A.M. Bobenchik, J.A. Hindler, A.N. Schuetz, Overview of changes to the clinical and laboratory standards institute performance standards for antimicrobial susceptibility testing, M100, 31st edition. J. Clin. Microbiol. 59(12), 11 (2021). https://doi.org/10.1128/JCM.00213-2110.1128/JCM.00213-21 ↗
46. M. Balouiri, M. Sadiki, S.K. Ibnsouda, Methods for in vitro evaluating antimicrobial activity: a review. J. Pharm. Anal. 6(2), 71–79 (2016). https://doi.org/10.1016/J.JPHA.2015.11.00510.1016/J.JPHA.2015.11.005 ↗
47. E. Kilicay, E. Erdal, B. Hazer, M. Türk, E.B. Denkbas, Antisense oligonucleotide delivery to cancer cell lines for the treatment of different cancer types. Artif. Cells Nanomed. Biotechnol. 44(8), 1938–1948 (2016). https://doi.org/10.3109/21691401.2015.111540910.3109/21691401.2015.1115409 ↗
48. V. Cannella et al., In vitro biocompatibility evaluation of nine dermal fillers on L929 cell line. Biomed. Res. Int. (2020). https://doi.org/10.1155/2020/867634310.1155/2020/8676343 ↗