Steel-Confined Circular Columns under Simulated Seismic Loads
Source abstract
Abstract
First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Structural Load-Bearing Analysis · Structural Engineering and Vibration Analysis · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. ACI Committee 318, 2014, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, MI, 519 pp.
2. Bae, S., 2005, “Seismic Performance of Full-Scale Reinforced Concrete Columns,” PhD thesis, Department of Civil, Architectural and Environmental Engineering, University of Texas at Austin, Austin, TX, 312 pp.
3. Bayrak, O., and Sheikh, S. A., 1998, “Confinement Reinforcement Design Considerations for Ductile HSC Columns,” Journal of Structural Engineering, ASCE, V. 124, No. 9, pp. 999-1010. doi: 10.1061/(ASCE)0733-9445(1998)124:9(999)10.1061/(ASCE)0733-9445(1998)124:9(999) ↗
4. EN 1998-1:2004, 2005, “Eurocode 8: Design of Structures for Earthquake Resistance -Part 1: General Rules, Seismic Actions and Rules for Buildings,” CEN, Brussels, Belgium, 229 pp.
5. CSA A23.3-14, 2019, “Design of Concrete Structures,” Canadian Standards Association (CSA), Rexdale, ON, Canada.
6. Elwood, K.; Maffei, J.; Riederer, K. A.; and Telleen, K., 2009, “Improving Column Confinement, Part 1: Assessment of Design Provisions,” Concrete International, V. 31, No. 11, Nov., pp. 32-39.
7. Ghosh, K. K., and Sheikh, S. A., 2007, “Seismic Upgrade with Carbon Fiber-Reinforced Polymer of Columns Containing Lap-Spliced Reinforcing Bars,” ACI Structural Journal, V. 104, No. 2, Mar.-Apr., pp. 227-236.10.14359/18535 ↗
8. Hwang, S. K., and Yun, H. D., 2004, “Effects of Transverse Reinforcement on Flexural Behaviour of High-Strength Concrete Columns,” Engineering Structures, V. 26, No. 1, pp. 1-12. doi: 10.1016/j.engstruct.2003.08.00410.1016/j.engstruct.2003.08.004 ↗
9. Iacobucci, R. D.; Sheikh, S. A.; and Bayrak, O., 2003, “Retrofit of Square Concrete Columns with Carbon Fiber-Reinforced Polymer for Seismic Resistance,” ACI Structural Journal, V. 100, No. 6, Nov.-Dec., pp. 785-794.10.14359/12845 ↗
10. Legeron, F., and Paultre, P., 2000, “Behavior of High-Strength Concrete Columns under Cyclic Flexure and Constant Axial Load,” ACI Structural Journal, V. 97, No. 4, July-Aug., pp. 591-601.10.14359/7425 ↗
11. Liu, J., and Sheikh, S. A., 2013, “Fiber-Reinforced Polymer-Confined Circular Columns under Simulated Seismic Loads,” ACI Structural Journal, V. 110, No. 6, Nov-Dec., pp. 941-952.10.14359/51686150 ↗
12. Memon, M. S., and Sheikh, S. A., 2005, “Seismic Resistance of Square Concrete Columns Retrofitted with Glass Fiber-Reinforced Polymer,” ACI Structural Journal, V. 102, No. 5, Sept.-Oct., pp. 774-783.10.14359/14673 ↗
13. NBCC-2005, 2005, “National Building Code of Canada,” National Research Council (NRC), Ottawa, ON, Canada.
14. NZS 3101: 2006, 2017, “Concrete Structures Standard,” Standards New Zealand (NZS), Wellington, New Zealand.
15. Paultre, P.; Eid, R.; Robles, H. I.; and Bouaanani, N., 2009, “Seismic Performance of Circular High-Strength Concrete Columns,” ACI Structural Journal, V. 106, No. 4, July-Aug., pp. 395-404.10.14359/56605 ↗
16. Paultre, P., and Légeron, F., 2008, “Confinement Reinforcement Design for Reinforced Concrete Columns,” Journal of Structural Engineering, ASCE, V. 134, No. 5, pp. 738-749. doi: 10.1061/(ASCE)0733-9445(2008)134:5(738)10.1061/(ASCE)0733-9445(2008)134:5(738) ↗
17. Paultre, P.; Legeron, F.; and Mongean, D., 2001, “Influence of Concrete Strength and Transverse Reinforcement yield Strength on Behavior of High-Strength Concrete Columns,” ACI Structural Journal, V. 98, No. 4, July-Aug., pp. 490-501.10.14359/10292 ↗
18. Saatcioglu, M., and Baingo, D., 1999, “Circular High-strength Concrete Columns under Simulated Seismic Loading,” Journal of Structural Engineering, ASCE, V. 125, No. 3, pp. 272-280. doi: 10.1061/(ASCE)0733-9445(1999)125:3(272)10.1061/(ASCE)0733-9445(1999)125:3(272) ↗
19. Saatcioglu, M., and Razvi, S. R., 2002, “Displacement-Based Design of Confined Concrete Columns for Confinement,” ACI Structural Journal, V. 99, No. 1, Jan.-Feb., pp. 3-11.10.14359/11030 ↗
20. Sheikh, S. A., and Khoury, S. S., 1993, “Confined Concrete Columns with Stubs,” ACI Structural Journal, V. 90, No. 4, July-Aug., pp. 414-431.10.14359/3960 ↗
21. Sheikh, S. A., and Khoury, S. S., 1997, “A Performance-Based Approach for the Design of Confining Steel in Tied Columns,” ACI Structural Journal, V. 94, No. 4, July-Aug., pp. 421-431.10.14359/493 ↗
22. Sheikh, S. A.; Shah, D. V.; and Khoury, S. S., 1994, “Confinement of High-Strength Concrete Columns,” ACI Structural Journal, V. 91, No. 1, Jan.-Feb., pp. 100-111.10.14359/4483 ↗
23. Sheikh, S. A., and Uzumeri, S. M., 1982, “Analytical Model for Concrete Confinement in Tied Columns,” Journal of the Structural Division, ASCE, V. 109, pp. 2703-2722.10.1061/JSDEAG.0006100 ↗
24. Sheikh, S. A., and Yau, G., 2002, “Seismic Behavior of Concrete Columns Confined with Steel and Fiber-Reinforced Polymers,” ACI Structural Journal, V. 99, No. 1, Jan.-Feb., pp. 72-80.10.14359/11037 ↗
25. Tavassoli, A.; Liu, J.; and Sheikh, S. A., 2015, “Glass Fiber-Reinforced Polymer-Reinforced Circular Columns under Simulated Seismic Loads,” ACI Structural Journal, V. 112, No. 1, Jan.-Feb., pp. 103-114. doi: 10.14359/5168722710.14359/51687227 ↗
26. Tavassoli, A., and Sheikh, S. A., 2017, “Seismic Resistance of Circular Columns Reinforced with Steel and GFRP,” Journal of Composites for Construction, ASCE, V. 21, No. 4. doi: 10.1061/(ASCE)CC.1943-5614.000077410.1061/(ASCE)CC.1943-5614.0000774 ↗
27. Watson, S., and Park, R., 1994, “Simulated Seismic Load Tests on Reinforced Concrete Columns,” Journal of Structural Engineering, ASCE, V. 120, No. 6, pp. 1825-1849. doi: 10.1061/(ASCE)0733-9445(1994)120:6(1825)10.1061/(ASCE)0733-9445(1994)120:6(1825) ↗