Interfacial Behavior of Glass Fiber-Reinforced Polymer Bars Embedded in Concrete with Internal Curing Agents

1. Aitcin, P. C., “The Durability Characteristics of High Performance Concrete: A Review,” Cement and Concrete Composites, V. 25, No. 4-5, 2003, pp. 409-420. doi: 10.1016/S0958-9465(02)00081-110.1016/S0958-9465(02)00081-1 ↗

2. Bentur, A.; Igarashi, S.; and Kovler, K., “Prevention of Autogenous Shrinkage in High-Strength Concrete by Internal Curing Using Wet Lightweight Aggregates,” Cement and Concrete Research, V. 31, No. 11, 2001, pp. 1587-1591. doi: 10.1016/S0008-8846(01)00608-110.1016/S0008-8846(01)00608-1 ↗

3. Bentz, D. P.; Snyder, K. A.; and Stutzman, P. E., 1997, “Microstructural Modeling of Self-Desiccating during Hydration,” Proceedings of the 1st International Seminar on Self-Desiccation and Its Importance in Concrete Technology, Lund, Sweden, 1997, pp. 132-140.

4. Koenders, E. A. B., and van Breugel, K., “Modeling Dimensional Changes in Low Water Cement Ratio Pastes,” Proceedings of the 1st International Seminar on Self-Desiccation and Its Importance in Concrete Technology, Lund, Sweden, 1997, 158-173.

5. Mehta, P. K., and Monteiro, P. J. M., Concrete: Microstructure, Properties, and Materials, McGraw-Hill, New York, 2013, 704 pp.

6. Cusson, D.; Lounis, Z.; and Daigle, L., “Benefits of Internal Curing on Service Life and Life-Cycle Cost of High-Performance Concrete Bridge Decks—A Case Study,” Cement and Concrete Composites, V. 32, No. 5, 2010, pp. 339-350. doi: 10.1016/j.cemconcomp.2010.02.00710.1016/j.cemconcomp.2010.02.007 ↗

7. RILEM, “Internal Curing of Concrete: State-of-the-Art Report of RILEM Technical Committee 196-ICC,” International Union of Laboratories and Experts in Construction Materials, Systems, and Structures, Bagneux, France, 2007, 161 pp.

8. ACI Committees 308 and 213, “Report on Internally Cured Concrete Using Prewetted Absorptive Lightweight Aggregate (ACI (308-213)R-13), American Concrete Institute, Farmington Hills, MI, 2013, 12 pp.

9. Bentz, D. P., and Weiss, W. J., “Internal Curing: A 2010 State-of-the-Art Review,” National Institute of Standards and Technology, Gaithersburg, MA, 2011, 82 pp.10.6028/NIST.IR.7765 ↗

10. Zhutovsky, S., and Kovler, K., “Effect of Internal Curing on Durability-Related Properties of High Performance Concrete,” Cement and Concrete Research, V. 42, No. 1, 2012, pp. 20-26. doi: 10.1016/j.cemconres.2011.07.01210.1016/j.cemconres.2011.07.012 ↗

11. Mindess, S.; Young, J. F.; and Darwin, D., Concrete, second edition, Pearson Education, Upper Saddle River, NJ, 2003, 644 pp.

12. Ahmed, E. A.; El-Salakawy, E. F.; and Benmokrane, B., “Performance Evaluation of Glass Fiber-Reinforced Polymer Shear Reinforcement for Concrete Beams,” ACI Structural Journal, V. 107, No. 1, Jan.-Feb. 2010, pp. 53-62.10.14359/51663388 ↗

13. ACI Committee 440, “Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars (ACI 440.1R-06),” American Concrete Institute, Farmington Hills, MI, 2006, 44 pp.

14. Mohr, B., and Bentz, D., eds., Internal Curing of High-Performance Concretes: Laboratory and Field Experience, SP-256, American Concrete Institute, Farmington Hills, MI, 2008. (CD-ROM)

15. Standards Australia, “Methods for Sampling and Testing Aggregates (AS 1141.6.1),” Sydney, New South Wales, Australia, 1995, 4 pp.

16. ASTM D2583-13, “Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor,” ASTM International, West Conshohocken, PA, 2013, 4 pp.

17. ASTM D792-13, “Standard Test Method for Density and Specific Gravity of Plastics by Displacement,” ASTM International, West Conshohocken, PA, 2013, 6 pp.

18. ASTM D2584-11, “Standard Test Method for Ignition Loss of Cured Reinforced Resins,” ASTM International, West Conshohocken, PA, 3 pp.

19. Craeye, B.; Geirnaert, M.; and De Schutter, G., “Super Absorbing Polymers as an Internal Curing Agent for Mitigation of Early-Age Cracking of High-Performance Concrete Bridge Decks,” Construction & Building Materials, V. 25, No. 1, 2011, pp. 1-13. doi: 10.1016/j.conbuildmat.2010.06.06310.1016/j.conbuildmat.2010.06.063 ↗

20. Kim, H., and Bentz, D., “Internal Curing with Crushed Returned Concrete Aggregates for High Performance Concrete,” Concrete Technology Forum: Focus on Sustainable Development, National Ready Mixed Concrete Association, College Park, MD, 2008, 12 pp. (CD-ROM)

21. ASTM C39/C39M-14, “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2014, 7 pp.

22. Neville, A. M., Properties of Concrete, Prentice Hall, Essex, UK, 1996, 844 pp.

23. Esteves, L. P.; Paiva, H.; Ferreira, V. M.; and Cachim, P., “Effect of Curing Conditions on the Mechanical Properties of Mortars with Superabsorbent Polymers,” Materiales de Construcción, V. 60, No. 298, 2010, pp. 61-72. doi: 10.3989/mc.2010.4860810.3989/mc.2010.48608 ↗

24. Pourjavadi, A.; Fakoorpoor, S. M.; Khaloo, A.; and Hosseini, P., “Improving the Performance of Cement-Based Composites Containing Superabsorbent Polymers by Utilization of Nano-SiO2 Particles,” Materials & Design, V. 42, 2012, pp. 94-101. doi: 10.1016/j.matdes.2012.05.03010.1016/j.matdes.2012.05.030 ↗

25. Bentz, D. P., and Jensen, O. M., “Mitigation Strategies for Autogenous Shrinkage Cracking,” Cement and Concrete Composites, V. 26, No. 6, 2004, pp. 677-685. doi: 10.1016/S0958-9465(03)00045-310.1016/S0958-9465(03)00045-3 ↗

26. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary,” American Concrete Institute, Farmington Hills, MI, 2011, 503 pp.

27. Khin, M.; Harada, T.; Tokumitsu, S.; and Idemitsu, T., “The Anchorage Mechanism for FRP Tendons Using Highly Expansive Materials for Anchoring,” 2nd International Conference on Advanced Composite Materials in Bridges and Structures, 1996, pp. 959-964.

28. CEB-FIP, “CEB-FIP Model Code,” Thomas Telford, London, UK, 1993, 437 pp.