Interface between Near-Surface-Mounted Carbon Fiber-Reinforced Polymer and Concrete in Thermal Distress

1. Hollaway, L. C., and Leeming, M. B., Strengthening of Reinforced Concrete Structures, Woodhead Publishing, Cambridge, UK, 1999, 352 pp.10.1533/9781855737617 ↗

2. Kim, Y. J., Advanced Composites in Bridge Construction and Repair, Woodhead Publishing, Elsevier, Cambridge, UK, 2014, 356 pp.

3. Barros, J. A. O.; Baghi, H.; Dias, S. J. E.; and Ventura-Gouveia, A., “A FEM-Based Model to Predict the Behaviour of RC Beams Shear Strengthened According to the NSM Technique,” Engineering Structures, V. 56, 2013, pp. 1192-1206. doi: 10.1016/j.engstruct.2013.06.03410.1016/j.engstruct.2013.06.034 ↗

4. De Lorenzis, L., and Teng, J. G., “Near-Surface Mounted FRP Reinforcement: An Emerging Technique for Strengthening Structures,” Composites. Part B, Engineering, V. 38, No. 2, 2007, pp. 119-143. doi: 10.1016/j.compositesb.2006.08.00310.1016/j.compositesb.2006.08.003 ↗

5. El-Hacha, R., and Rizkalla, S. H., “Near-Surface-Mounted Fiber-Reinforced Polymer Reinforcements for Flexural Strengthening of Concrete Structures,” ACI Structural Journal, V. 101, No. 5, Sept.-Oct. 2004, pp. 717-726.10.14359/13394 ↗

6. Hassan, T. K., and Rizkalla, S. H., “Bond Mechanism of Near-Surface-Mounted Fiber-Reinforced Polymer Bars for Flexural Strengthening of Concrete Structures,” ACI Structural Journal, V. 101, No. 6, Nov.-Dec. 2004, pp. 830-839.10.14359/13458 ↗

7. Burke, P. J.; Bisby, L. A.; and Green, M. F., “Effects of Elevated Temperature on Near Surface Mounted and Externally Bonded FRP Strengthening Systems for Concrete,” Cement and Concrete Composites, V. 35, No. 1, 2013, pp. 190-199. doi: 10.1016/j.cemconcomp.2012.10.00310.1016/j.cemconcomp.2012.10.003 ↗

8. Kodur, V. K. R., and Yu, B., “Evaluating the Fire Response of Concrete Beams Strengthened with Near-Surface-Mounted FRP Reinforcement,” Journal of Composites for Construction, ASCE, V. 17, No. 4, 2013, pp. 517-529. doi: 10.1061/(ASCE)CC.1943-5614.000034810.1061/(ASCE)CC.1943-5614.0000348 ↗

9. Palmieri, A.; Matthys, S.; and Taerwe, L., “Fire Endurance and Residual Strength of Insulated Concrete Beams Strengthened with Near-Surface-Mounted Reinforcement,” Journal of Composites for Construction, ASCE, V. 17, No. 4, 2013, pp. 454-462. doi: 10.1061/(ASCE)CC.1943-5614.000033810.1061/(ASCE)CC.1943-5614.0000338 ↗

10. ACI Committee 440, “Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-08),” American Concrete Institute, Farmington Hills, MI, 2008, 76 pp.

11. Novidis, D. G., and Pantazopoulou, S. J., “Bond Test of Short NSM-FRP and Steel Bar Anchorages,” Journal of Composites for Construction, ASCE, V. 12, No. 3, 2008, pp. 323-333. doi: 10.1061/(ASCE)1090-0268(2008)12:3(323)10.1061/(ASCE)1090-0268(2008)12:3(323) ↗

12. Kodur, V. K. R.; Bisby, L. A.; and Green, M. F., “Guidance for the Design of FRP-Strengthened Concrete Members Exposed to Fire,” Journal of Fire Protection Engineering, V. 17, No. 1, 2007, pp. 5-26. doi: 10.1177/104239150706195610.1177/1042391507061956 ↗

13. ASTM D7028-07, “Standard Test Method for Glass Transition Temperature of Polymer Matrix Composites by Dynamic Mechanical Analysis,” ASTM International, West Conshohocken, PA, 2007, 13 pp.

14. ASTM D638-10, “Standard Test Method for Tensile Properties of Plastics,” ASTM International, West Conshohocken, PA, 2010, 17 pp.

15. Rostasy, F., “Fiber Composite Elements and Techniques as Non-Metallic Reinforcement of Concrete,” Brite project 4142/BREU-CT910515, Evaluation of Potential and Production Technologies of FRP, Technical Report Task 1, 1992, 14 pp.

16. Moussa, O.; Vassilopoulos, A. P.; de Castro, J.; and Keller, T., “Time-Temperature Dependence of Thermomechanical Recovery of Cold-Curing Structural Adhesives,” International Journal of Adhesion and Adhesives, V. 35, 2012, pp. 94-101. doi: 10.1016/j.ijadhadh.2012.02.00510.1016/j.ijadhadh.2012.02.005 ↗

17. Hu, W., Polymer Physics: A Molecular Approach, Springer, Berlin, Germany, 2013, 248 pp.10.1007/978-3-7091-0670-9 ↗

18. Seracino, R.; Jones, N. M.; Ali, M. S. M.; Page, M. W.; and Oehlers, D. J., “Bond Strength of Near-Surface Mounted FRP Strip-to-Concrete Joints,” Journal of Composites for Construction, ASCE, V. 11, No. 4, 2007, pp. 401-409. doi: 10.1061/(ASCE)1090-0268(2007)11:4(401)10.1061/(ASCE)1090-0268(2007)11:4(401) ↗

19. PCI, PCI Design Handbook, seventh edition, Precast/Prestressed Concrete Institute, Chicago, IL, 2010, 804 pp.

20. Williams, B. K., “Fire Performance of FRP-Strengthened Reinforced Concrete Flexural Members,” PhD thesis, Queen’s University, Kingston, ON, Canada, 2004, 389 pp.

21. ISO, “Fire Resistance Tests—Elements of Building Construction (ISO 834),” International Organization for Standardization, Geneva, Switzerland, 1999, 53 pp.

22. Eamon, C. D., and Jensen, E., “Reliability Analysis of Prestressed Concrete Beams Exposed to Fire,” Engineering Structures, V. 43, 2012, pp. 69-77. doi: 10.1016/j.engstruct.2012.05.01610.1016/j.engstruct.2012.05.016 ↗

23. Hasofer, A. M.; Beck, V. R.; and Bennetts, I. D., Risk Analysis in Building Fire Safety Engineering, Butterworth-Heinemann, Burlington, MA, 2007, 208 pp.10.4324/9780080467269 ↗

24. Duncan, J. M., “Factors of Safety and Reliability in Geotechnical Engineering,” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, V. 126, No. 4, 2000, pp. 307-316. doi: 10.1061/(ASCE)1090-0241(2000)126:4(307)10.1061/(ASCE)1090-0241(2000)126:4(307) ↗

25. Ang, A. H.-S., and Tang, W. H., Probability Concepts in Engineering Planning and Design, John Wiley and Sons, New York, 1984, 562 pp.

26. Barker, R. M., and Puckett, J. A., Design of Highway Bridges Based on AASHTO LRFD Bridge Design Specifications, John Wiley and Sons, New York, 1997, 1192 pp.