Automated classification of granular bainite and polygonal ferrite by electron backscatter diffraction verified through local structural and mechanical analyses
Source abstract
Abstract
Abstract Differentiation of granular bainite and polygonal ferrite in high-strength low-alloy (HSLA) steels possesses a significant challenge, where both nanoindentation and chemical analyses do not achieve an adequate phase classification due to the similar mechanical and chemical properties of both constituents. Here, the kernel average misorientation from electron backscatter diffraction (EBSD) was implemented into a Matlab code to differentiate and quantify the microstructural constituents. Correlative electron channeling contrast imaging (ECCI) validated the automated phase classification results and was further employed to investigate the effect of the grain tolerance angle on classification. Moreover, ECCI investigations highlighted that the grain structure of HSLA steels can be subdivided into four grain categories. Each category contained a different nanohardness or substructure size that precluded a nanoindentation-based phase classification. Consequently, the automated EBSD classification approach based on local misorientation achieved a reliable result using a grain tolerance angle of 5°. Graphical abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. S. Zajac, V. Schwinn, K.H. Tacke, Characterisation and quantification of complex bainitic microstructures in high and ultra-high strength linepipe steels. Mater. Sci. Forum 500–501, 387–394 (2005). https://doi.org/10.4028/www.scientific.net/msf.500-501.38710.4028/www.scientific.net/msf.500-501.387 ↗
2. Z.J. Xie, X.P. Ma, C.J. Shang, X.M. Wang, S.V. Subramanian, Nano-sized precipitation and properties of a low carbon niobium micro-alloyed bainitic steel. Mater. Sci. Eng. A 641, 37–44 (2015). https://doi.org/10.1016/j.msea.2015.05.10110.1016/j.msea.2015.05.101 ↗
3. S. Jun Jia, B. Li, Q. You Liu, Y. Ren, S. Zhang, H. Gao, Effects of continuous cooling rate on morphology of granular bainite in pipeline steels. J. Iron Steel Res. Int. 27, 681–690 (2020). https://doi.org/10.1007/s42243-019-00346-310.1007/s42243-019-00346-3 ↗
4. W.B. Lee, S.G. Hong, C.G. Park, S.H. Park, Carbide precipitation and high-temperature strength of hot-rolled high-strength, low-alloy steels containing Nb and Mo. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 33, 1689–1698 (2002). https://doi.org/10.1007/s11661-002-0178-210.1007/s11661-002-0178-2 ↗
5. G. Krauss, S.W. Thompson, Ferritic microstructures in continuously cooled low- and ultralow-carbon steels. ISIJ Int. 35, 937–945 (1995). https://doi.org/10.2355/isijinternational.35.93710.2355/isijinternational.35.937 ↗
6. T.N. Baker, Microalloyed steels. Ironmak. Steelmak. 43, 264–307 (2016). https://doi.org/10.1179/1743281215Y.000000006310.1179/1743281215Y.0000000063 ↗
7. S.W. Thompson, D.J. Vin Col, G. Krauss, Continuous cooling transformations and microstructures in a low-carbon, high-strength low-alloy plate steel. Metall. Trans. A 21, 1493–1507 (1990). https://doi.org/10.1007/BF0267256410.1007/BF02672564 ↗
8. B.X. Wang, X.H. Liu, G.D. Wang, Correlation of microstructures and low temperature toughness in low carbon Mn–Mo–Nb pipeline steel. Mater. Sci. Technol. 29, 1522–1528 (2013). https://doi.org/10.1179/1743284713Y.000000032610.1179/1743284713Y.0000000326 ↗
9. H.K.D.H. Bhadeshia, Bainite in Steels: Theory and Practice (CRC Press, Boca Raton, 2019)10.1201/9781315096674 ↗
10. B.M. Huang, J.R. Yang, H.W. Yen, C.H. Hsu, C.Y. Huang, H. Mohrbacher, Secondary hardened bainite. Mater. Sci. Technol. 30, 1014–1023 (2014). https://doi.org/10.1179/1743284714Y.000000053610.1179/1743284714Y.0000000536 ↗
11. C.N. Hulme-Smith, I. Lonardelli, M.J. Peet, A.C. Dippel, H.K.D.H. Bhadeshia, Enhanced thermal stability in nanostructured bainitic steel. Scr. Mater. 69, 191–194 (2013). https://doi.org/10.1016/j.scriptamat.2013.03.02910.1016/j.scriptamat.2013.03.029 ↗
12. R.Y. Zhang, J.D. Boyd, Bainite transformation in deformed austenite. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 41, 1448–1459 (2010). https://doi.org/10.1007/s11661-010-0190-x10.1007/s11661-010-0190-x ↗
13. M.C. Zhao, K. Yang, F.R. Xiao, Y.Y. Shan, Continuous cooling transformation of undeformed and deformed low carbon pipeline steels. Mater. Sci. Eng. A 355, 126–136 (2003). https://doi.org/10.1016/S0921-5093(03)00074-110.1016/S0921-5093(03)00074-1 ↗
14. H.J. Jun, J.S. Kang, D.H. Seo, K.B. Kang, C.G. Park, Effects of deformation and boron on microstructure and continuous cooling transformation in low carbon HSLA steels. Mater. Sci. Eng. A 422, 157–162 (2006). https://doi.org/10.1016/j.msea.2005.05.00810.1016/j.msea.2005.05.008 ↗
15. Y.W. Chen, Y.T. Tsai, P.Y. Tung, S.P. Tsai, C.Y. Chen, S.H. Wang, J.R. Yang, Phase quantification in low carbon Nb-Mo bearing steel by electron backscatter diffraction technique coupled with kernel average misorientation. Mater. Charact. 139, 49–58 (2018). https://doi.org/10.1016/j.matchar.2018.01.04110.1016/j.matchar.2018.01.041 ↗
16. Y.W. Chen, B.M. Huang, Y.T. Tsai, S.P. Tsai, C.Y. Chen, J.R. Yang, Microstructural evolutions of low carbon Nb/Mo-containing bainitic steels during high-temperature tempering. Mater. Charact. 131, 298–305 (2017). https://doi.org/10.1016/j.matchar.2017.07.02210.1016/j.matchar.2017.07.022 ↗
17. M. Müller, D. Britz, L. Ulrich, T. Staudt, F. Mücklich, Classification of bainitic structures using textural parameters and machine learning techniques. Metals 10, 1–19 (2020). https://doi.org/10.3390/met1005063010.3390/met10050630 ↗
18. S.C. Wang, J.R. Yang, Effects of chemical composition, rolling and cooling conditions on the amount of martensite/austenite (M/A) constituent formation in low carbon bainitic steels. Mater. Sci. Eng. A 154, 43–49 (1992). https://doi.org/10.1016/0921-5093(92)90361-410.1016/0921-5093(92)90361-4 ↗
19. J. Wu, P.J. Wray, C.I. Garcia, M. Hua, A.J. Deardo, Image quality analysis: A new method of characterizing microstructures. ISIJ Int. 45, 254–262 (2005). https://doi.org/10.2355/isijinternational.45.25410.2355/isijinternational.45.254 ↗
20. E. Keehan, L. Karlsson, H.K.D.H. Bhadeshia, M. Thuvander, Electron backscattering diffraction study of coalesced bainite in high strength steel weld metals. Mater. Sci. Technol. 24, 1183–1188 (2008). https://doi.org/10.1179/174328407X22657210.1179/174328407X226572 ↗
21. S.I. Wright, M.M. Nowell, D.P. Field, A review of strain analysis using electron backscatter diffraction. Microsc. Microanal. 17, 316–329 (2011). https://doi.org/10.1017/S143192761100005510.1017/S1431927611000055 ↗
22. L. Ryde, Application of EBSD to analysis of microstructures in commercial steels. Mater. Sci. Technol. 22, 1297–1306 (2006). https://doi.org/10.1179/174328406X13094810.1179/174328406X130948 ↗
23. S. Zaefferer, P. Romano, F. Friedel, EBSD as a tool to identify and quantify bainite and ferrite in low-alloyed Al-TRIP steels. J. Microsc. 230, 499–508 (2008). https://doi.org/10.1111/j.1365-2818.2008.02010.x10.1111/j.1365-2818.2008.02010.x ↗
24. P. Cizek, The microstructure evolution and softening processes during high-temperature deformation of a 21Cr-10Ni-3Mo duplex stainless steel. Acta Mater. 106, 129–143 (2016). https://doi.org/10.1016/j.actamat.2016.01.01210.1016/j.actamat.2016.01.012 ↗
25. K. Zhu, O. Bouaziz, C. Oberbillig, M. Huang, An approach to define the effective lath size controlling yield strength of bainite. Mater. Sci. Eng. A 527, 6614–6619 (2010). https://doi.org/10.1016/j.msea.2010.06.06110.1016/j.msea.2010.06.061 ↗
26. B.-W. Choi, D.-H. Seo, J. Jang, A nanoindentation study on the micromechanical characteristics of API X100 pipeline steel. Met. Mater. Int. 15, 373–378 (2009). https://doi.org/10.1007/s12540-009-0373-410.1007/s12540-009-0373-4 ↗
27. R.M. Jentner, K. Srivastava, S. Scholl, F.J. Gallardo-Basile, J.P. Best, C. Kirchlechner, G. Dehm, Unsupervised clustering of nanoindentation data for microstructural reconstruction: Challenges in phase discrimination. Materialia 28, 101750 (2023). https://doi.org/10.1016/j.mtla.2023.10175010.1016/j.mtla.2023.101750 ↗
28. T. Yamashita, Y. Tanaka, M. Nagoshi, K. Ishida, Novel technique to suppress hydrocarbon contamination for high accuracy determination of carbon content in steel by FE-EPMA. Sci. Rep. 6, 29825 (2016). https://doi.org/10.1038/srep2982510.1038/srep29825 ↗
29. P.T. Pinard, A. Schwedt, A. Ramazani, U. Prahl, S. Richter, Characterization of dual-phase steel microstructure by combined submicrometer EBSD and EPMA carbon measurements. Microsc. Microanal. 19, 996–1006 (2013). https://doi.org/10.1017/S143192761300155410.1017/S1431927613001554 ↗
30. S. Eswara, A. Pshenova, E. Lentzen, G. Nogay, M. Lehmann, A. Ingenito, Q. Jeangros, F.-J. Haug, N. Valle, P. Philipp, A. Hessler-Wyser, T. Wirtz, A method for quantitative nanoscale imaging of dopant distributions using secondary ion mass spectrometry: An application example in silicon photovoltaics. MRS Commun. 9, 916–923 (2019). https://doi.org/10.1557/mrc.2019.8910.1557/mrc.2019.89 ↗
31. M. Kubicek, G. Holzlechner, A.K. Opitz, S. Larisegger, H. Hutter, J. Fleig, A novel ToF-SIMS operation mode for sub 100nm lateral resolution: Application and performance. Appl. Surf. Sci. 289, 407–416 (2014). https://doi.org/10.1016/j.apsusc.2013.10.17710.1016/j.apsusc.2013.10.177 ↗
32. B. Josefsson, H.-O. Andrén, Microstructure of granular bainite. Le Journal de Physique Colloques 49, 293–298 (1988). https://doi.org/10.1051/jphyscol:198865110.1051/jphyscol:1988651 ↗
33. H. Bhadeshia, R. Honeycombe, Steels: Microstructure and Properties (Butterworth-Heinemann, Boston, 2017)
34. F.G. Caballero, H. Roelofs, S. Hasler, C. Capdevila, J. Chao, J. Cornide, C. Garcia-Mateo, Influence of bainite morphology on impact toughness of continuously cooled cementite free bainitic steels. Mater. Sci. Technol. 28, 95–102 (2012). https://doi.org/10.1179/1743284710Y.000000004710.1179/1743284710Y.0000000047 ↗
35. D. De-Castro, A. Eres-Castellanos, J. Vivas, F.G. Caballero, D. San-Martín, C. Capdevila, Morphological and crystallographic features of granular and lath-like bainite in a low carbon microalloyed steel. Mater. Charact. 184, 111703 (2022). https://doi.org/10.1016/j.matchar.2021.11170310.1016/j.matchar.2021.111703 ↗
36. W.C. Jeong, Microstructural aspects of quasi-polygonal and granular bainitic ferrites in an ultra-low-carbon interstitial-free high-strength steel. Metall. Mater. Trans. A 34, 2025–2026 (2003). https://doi.org/10.1007/s11661-003-0167-010.1007/s11661-003-0167-0 ↗
37. S. Zaefferer, J. Ohlert, W. Bleck, A study of microstructure, transformation mechanisms and correlation between microstructure and mechanical properties of a low alloyed TRIP steel. Acta Mater. 52, 2765–2778 (2004). https://doi.org/10.1016/j.actamat.2004.02.04410.1016/j.actamat.2004.02.044 ↗
38. B.L. Bramfitt, J.G. Speer, A perspective on the morphology of bainite. Metall. Trans. A 21, 817–829 (1990). https://doi.org/10.1007/BF0265656510.1007/BF02656565 ↗
39. F. Bachmann, R. Hielscher, H. Schaeben, Texture analysis with MTEX-free and open source software toolbox. Solid State Phenom. (2010). https://doi.org/10.4028/www.scientific.net/SSP.160.6310.4028/www.scientific.net/SSP.160.63 ↗
40. B. Eghbali, A. Abdollah-Zadeh, H. Beladi, P.D. Hodgson, Characterization on ferrite microstructure evolution during large strain warm torsion testing of plain low carbon steel. Mater. Sci. Eng. A 435–436, 499–503 (2006). https://doi.org/10.1016/j.msea.2006.07.02610.1016/j.msea.2006.07.026 ↗
41. T.B. Britton, D. Randman, A.J. Wilkinson, Nanoindentation study of slip transfer phenomenon at grain boundaries. J. Mater. Res. 24, 607–615 (2009). https://doi.org/10.1557/jmr.2009.008810.1557/jmr.2009.0088 ↗
42. W.A. Soer, K.E. Aifantis, J.T.M. De Hosson, Incipient plasticity during nanoindentation at grain boundaries in body-centered cubic metals. Acta Mater. 53, 4665–4676 (2005). https://doi.org/10.1016/j.actamat.2005.07.00110.1016/j.actamat.2005.07.001 ↗
43. T. Furuhara, H. Kawata, S. Morito, T. Maki, Crystallography of upper bainite in Fe-Ni-C alloys. Mater. Sci. Eng. A 431, 228–236 (2006). https://doi.org/10.1016/j.msea.2006.06.03210.1016/j.msea.2006.06.032 ↗
44. S. Zaefferer, N.N. Elhami, Theory and application of electron channelling contrast imaging under controlled diffraction conditions. Acta Mater. 75, 20–50 (2014). https://doi.org/10.1016/j.actamat.2014.04.01810.1016/j.actamat.2014.04.018 ↗
45. S. Morito, H. Saito, T. Ogawa, T. Furuhara, T. Maki, Effect of austenite grain size on the morphology and crystallography of lath martensite in low carbon steels. ISIJ Int. 45, 91–94 (2005). https://doi.org/10.2355/isijinternational.45.9110.2355/isijinternational.45.91 ↗
46. J.M. Reichert, M. Militzer, W.J. Poole, L. Collins, A new approach using EBSD to quantitatively distinguish complex transformation products along the HAZ in X80 Linepipe steel, in: Volume 3: Materials and Joining; Risk and Reliability, American Society of Mechanical Engineers, 2014: pp. 1–7. https://doi.org/10.1115/IPC2014-33668.10.1115/IPC2014-33668 ↗
47. H. Terasaki, Y.I. Komizo, Morphology and crystallography of bainite transformation in a single prior-austenite grain of low-carbon steel. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 44, 2683–2689 (2013). https://doi.org/10.1007/s11661-013-1610-510.1007/s11661-013-1610-5 ↗
48. S.K. Mishra, P. Pant, K. Narasimhan, A.D. Rollett, I. Samajdar, On the widths of orientation gradient zones adjacent to grain boundaries. Scr. Mater. 61, 273–276 (2009). https://doi.org/10.1016/j.scriptamat.2009.03.06210.1016/j.scriptamat.2009.03.062 ↗
49. C. Perrin, S. Berbenni, H. Vehoff, M. Berveiller, Role of discrete intragranular slip on lattice rotations in polycrystalline Ni: Experimental and micromechanical studies. Acta Mater. 58, 4639–4649 (2010). https://doi.org/10.1016/j.actamat.2010.04.03310.1016/j.actamat.2010.04.033 ↗
50. A.D. Rollett, F. Wagner, N. Allain-Bonasso, D.P. Field, R.A. Lebensohn, Comparison of gradients in orientation and stress between experiment and simulation. Mater. Sci. Forum 702–703, 463–468 (2011). https://doi.org/10.4028/www.scientific.net/MSF.702-703.46310.4028/www.scientific.net/MSF.702-703.463 ↗
51. S.I. Wright, M.M. Nowell, R. De Kloe, L. Chan, Orientation precision of electron backscatter diffraction measurements near grain boundaries. Microsc. Microanal. 20, 852–863 (2014). https://doi.org/10.1017/S143192761400035X10.1017/S143192761400035X ↗
52. W.C. Oliver, G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564–1583 (1992). https://doi.org/10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗