Microstructural development of ZnO using a rate-controlled sintering dilatometer

Rate-controlled sintering (RCS) of isostatically pressed particulate compacts of ZnO showed lower average grain sizes and intragranular pore densities than constant heating rate temperature controlled sintering. Valid comparisons of this form could only be made after corrections to hardware and software which reduced specimen creep under dilatometer pushrod load, nonuniform pushrod expansion, reproducible specimen temperature determination, thermal expansion during sintering, and instantaneous termination of sintering at the specified end of RCS. The improved microstructures from RCS were attributed to maximized efficiency of densification, optimizing the time and temperatures permitted for grain growth.