Growth, characterization, and kinetic modeling of diiron boride layers on W302 steel
Source abstract
Abstract
Abstract This study was focused on solid boriding of W302 steel, by using a Durborid powder with lowered active boron content, to obtain pure diiron boride layers. The processes were realized at temperatures from the range of 950–1050 °C and for holding times of up to 7 h. The obtained layer-to-substrate interfaces showed a very low degree of columnarity. X-ray diffraction analysis confirmed the presence of iron borides (Fe 2 B and traces of FeB). The growth of boride layers followed a parabolic relation with time. The thickness of boride coatings varied from 22 ± 1 to 82 ± 5.4 µm. The B activation energies were assessed through two models. The integral method and Taylor expansion model yielded the same activation energy (close to 206 kJ mol-1) with the difference in pre-exponent factors. The obtained results are useful for determining the optimum layer thickness for industrial applications where the wear is the most important issue. Graphical abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Boron and Carbon Nanomaterials Research · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. A.K. Litoria, C.A. Figueroa, L.T. Bim, C.I. Pruncu, A. Joshi, S. Hosmani, Pack-boriding of low alloy steel: microstructure evolution and migration behaviour of alloying elements. Philos. Mag. 100(3), 353–378 (2020). https://doi.org/10.1080/14786435.2019.168089010.1080/14786435.2019.1680890 ↗
2. B. Aktas, M. Toprak, A. Calik, A. Tekguler, Effect of pack-boriding on the tribological behavior of Hardox 450 and HiTuf steels. Rev. Adv. Mater. Sci. 59, 314–321 (2020). https://doi.org/10.1515/rams-2020-003010.1515/rams-2020-0030 ↗
3. I. Yildiz, Surface characterization and boriding of nickel and cobalt alloys. Prot. Met. Phys. Chem. Surf. 58, 772–778 (2022). https://doi.org/10.1134/S207020512204024410.1134/S2070205122040244 ↗
4. G. Kara, G. Purcek, Boriding behaviour of titanium alloys with different crystalline structures. Surf. Eng. 35(7), 611–617 (2019). https://doi.org/10.1080/02670844.2018.155264610.1080/02670844.2018.1552646 ↗
5. Kulka M (2019) Trends in thermochemical techniques of boriding, in: Current Trends in Boriding. Engineering Materials, Springer, Cham, Switzerland10.1007/978-3-030-06782-3 ↗
6. M. Kulka, N. Makuch, A. Piasecki, Nanomechanical characterization and fracture toughness of FeB and Fe2B iron borides produced by gas boriding of Armco iron. Surf. Coat. Technol. 325, 515–532 (2017). https://doi.org/10.1016/j.surfcoat.2017.07.02010.1016/j.surfcoat.2017.07.020 ↗
7. T.L. Christiansen, F. Bottoli, K. Dahl, N.B. Gammeltoft-Hansen, M.B. Laursen, M.A.J. Somers, Hard surface layers by pack boriding and gaseous thermo-reactive deposition and diffusion treatments. Mater. Perform. Charact. 6, 475–491 (2017). https://doi.org/10.1520/MPC2016010610.1520/MPC20160106 ↗
8. M. Keddam, M. Hudáková, J. Ptačinová, R. Moravčík, P. Gogola, Z. Gabalcová, P. Jurči, Characterization of boronized layers on Vanadis 6 tool steel. Surf. Eng. 37, 445–454 (2021). https://doi.org/10.1080/02670844.2020.178137710.1080/02670844.2020.1781377 ↗
9. I. Campos-Silva, M. Flores-Jiménez, G. Rodríguez-Castro, E. Hernández-Sánchez, J. Martínez-Trinidad, R. Tadeo-Rosas, Improved fracture toughness of boride coating developed with a diffusion annealing process. Surf. Coat. Technol. 237, 429–439 (2013). https://doi.org/10.1016/j.surfcoat.2013.05.05010.1016/j.surfcoat.2013.05.050 ↗
10. G. Rodríguez-Castro, I. Campos-Silva, E. Chávez-Gutiérrez, H.-Sánchez. E. Martínez-Trinidad, A. Torres-Hernández, Mechanical properties of FeB and Fe2B layers estimated by Berkovich nanoindentation on tool borided steel. Surf. Coat. Technol. 215, 291–299 (2013). https://doi.org/10.1016/j.surfcoat.2012.05.14510.1016/j.surfcoat.2012.05.145 ↗
11. E. Hernández-Sanchez, G. Rodriguez-Castro, A. Meneses-Amador, D. Bravo-Bárcenas, I. Arzate-Vazquez, H. Martínez-Gutiérrez, M. Romero-Romo, I. Campos-Silva, Effect of the anisotropic growth on the fracture toughness measurements obtained in the Fe2B layer. Surf. Coat. Technol. 237, 292–298 (2013). https://doi.org/10.1016/j.surfcoat.2013.09.06410.1016/j.surfcoat.2013.09.064 ↗
12. G. Kartal Sireli, H. Yuce, M. Arslan, M. Karimzadehkhoei, S. Timur, Improving the surface performance of discarded AISI T1 steel by cathodic reduction and thermal diffusion-based boriding. J. Mater. Eng. Perform. 32, 9504–9514 (2023). https://doi.org/10.1007/s11665-023-07817-510.1007/s11665-023-07817-5 ↗
13. L.G. Yu, X.J. Chen, A.K. Khor, G. Sundararajan, FeB/FeB phase transformation during SPS pack-boriding: boride layer growth kinetics. Acta Mater. 53, 2361–2368 (2005). https://doi.org/10.1016/j.actamat.2005.01.04310.1016/j.actamat.2005.01.043 ↗
14. M.G. Krukovich, B.A. Prusakov, I.G. Sizov, Plasticity of boronized layers (Springer International Publishing, Switzerland, 2016)10.1007/978-3-319-40012-9 ↗
15. R.G. Pereira, F.E. Mariani, A.N. Lombardi, G.E. Totten, L.C. Casteletti, Characterization of layers produced by boriding and Boriding-PVD on AISI D2 Tool Steel. Mater. Perform. Charact. 5(4), 406–413 (2016). https://doi.org/10.1520/MPC2015006710.1520/MPC20150067 ↗
16. V.I. Dybkov, Boriding of high chromium steels. Curr. Phys. Chem. 6, 137–144 (2016). https://doi.org/10.2174/187794680666616033120382410.2174/1877946806666160331203824 ↗
17. C.K.N. Oliveira, L.C. Casteletti, A. Lombardi Neto, G.E. Totten, S.C. Heck, Production and characterization of boride layers on AISI D2 tool steel. Vacuum 84, 792–796 (2010). https://doi.org/10.1016/j.vacuum.2009.10.03810.1016/j.vacuum.2009.10.038 ↗
18. G. Kartal, S. Timur, V. Sista, O.J. Eryilmaz, A. Erdemir, The growth of single Fe2B phase on low carbon steel via phase homogenization in electrochemical boriding (PHEB). Surf. Coat. Technol. 206, 2005–2011 (2011). https://doi.org/10.1016/j.surfcoat.2011.08.04910.1016/j.surfcoat.2011.08.049 ↗
19. K. Rayane, O. Allaoui, A. Allaoui, Effect of diffusion annealing on borides layers produced on XC38 steel. Acta Phys. Pol. A. 132, 521–523 (2017). https://doi.org/10.12693/APhysPolA.132.52110.12693/APhysPolA.132.521 ↗
20. A.J. Morales Robles, M. Ortiz Domínguez, E. Cardoso Legorreta, A. Cruz Avilés, Influencia del potencial químico en el tratamiento de borurización en caja. Ingenio Y Conciencia Boletín Científico De La Escuela Superior Ciudad Sahagún 11(22), 28–52 (2024). https://doi.org/10.29057/escs.v11i22.1272210.29057/escs.v11i22.12722 ↗
21. C.I.V. Mendoza, J.L.R. Mendoza, V.I. Galván, R.P. Hodgkins, A.L. Valdivieso, L.L.S. Palacios, V.I. Junquera, Effect of substrate roughness, time and temperature on the processing of iron boride coatings: experimental and statistical approaches. Int. J. Surf. Sci. Eng. 8, 71–91 (2014). https://doi.org/10.1504/IJSURFSE.2014.05931510.1504/IJSURFSE.2014.059315 ↗
22. I. Campos-Silva, M. Ortiz-Domínguez, C. Tapia-Quintero, G. Rodríguez-Castro, M.Y. Jiménez-Reyes, E. Chávez-Gutiérrez, Kinetics and boron diffusion in the FeB/Fe2B layers formed at the surface of borided high-alloy steel. J. Mater. Eng. Perform. 21(8), 1714–1723 (2011)10.1007/s11665-011-0088-9 ↗
23. M. Ortiz-Domínguez, M. Keddam, M. Elias-Espinosa, M. Ramírez-Cardona, A. Arenas-Flores, J. Zuno-Silva, F. Cervantes-Sodi, E. Cardoso-Legorreta, Characterization and boriding kinetics of AISI T1 steel. Metall. Res. Technol. 116, 102 (2019). https://doi.org/10.1051/metal/201808110.1051/metal/2018081 ↗
24. K.G. Anthymidis, E. Stergioudis, D.N. Tsipas, Boriding in a fluidized bed reactor. Mater. Lett. 51(2), 156–160 (2001). https://doi.org/10.1016/S0167-577X(01)00283-X10.1016/S0167-577X(01)00283-X ↗
25. J.H. Yoon, Y.K. Jee, S.Y. Lee, Plasma paste boronizing treatment of the stainless steel AISI 304. Surf. Coat. Technol. 112(1–3), 71–75 (1999). https://doi.org/10.1016/S0257-8972(98)00743-910.1016/S0257-8972(98)00743-9 ↗
26. I. Gunes, S. Ulker, S. Taktak, Kinetics of plasma paste boronized AISI 8620 steel in borax paste mixtures. Prot. Met. Phys. Chem. Surf. 49, 567–573 (2013). https://doi.org/10.1134/S207020511305012210.1134/S2070205113050122 ↗
27. I. Campos-Silva, E.J. Hernandez-Ramirez, A. Contreras-Hernandez, J.L. Rosales-Lopez, E. Valdez-Zayas, I. Mejía-Caballero, J. Martínez-Trinidad, Pulsed-DC powder-pack boriding: growth kinetics of boride layers on an AISI 316 L stainless steel and Inconel 718 superalloy. Surf. Coat. Technol. 421, 127404 (2021). https://doi.org/10.1016/j.surfcoat.2021.12740410.1016/j.surfcoat.2021.127404 ↗
28. J.R. Davis, Surface hardening of steels: understanding the basics, 1st edn. (ASM International, USA, 2002)
29. Á.J. Morales-Robles, M. Ortiz-Domínguez, O.A. Gómez-Vargas, M.D.L.L. Moreno-González, Boronize coatings studied with a new mass transfer model. Materials 17(21), 5309 (2024). https://doi.org/10.3390/ma1721530910.3390/ma17215309 ↗
30. M. Ortiz-Domínguez, A.J. Morales-Robles, O.A. Gómez-Vargas, G. Moreno-González, Surface growth of boronize coatings studied with mathematical models of diffusion. Metals 14(6), 670 (2024). https://doi.org/10.3390/met1406067010.3390/met14060670 ↗
31. H. Okamoto, B-Fe (boron-iron). J. Phase Equilib. Diffus. 25, 297–298 (2004). https://doi.org/10.1007/s11669-004-0128-310.1007/s11669-004-0128-3 ↗
32. H. Kunst, O. Schaaber, Beobachtungen beim Oberflaechenborieren von Stahl. HTM Haert.-Tech. Mitt. 22, 1–25 (1967)
33. N. Makuch, M. Kulka, M. Keddam, A. Piasecki, Growth kinetics, microstructure evolution, and some mechanical properties of boride layers produced on X165CrV12 tool steel. Materials. 16, 26 (2023). https://doi.org/10.3390/ma1601002610.3390/ma16010026 ↗
34. E. Hernández-Sánchez, J.C. Velázquez, J.L. Castrejón-Flores, A. Chino-Ulloa, I.P. Torres Avila, R. Carrera-Espinoza, J.A. Yescas-Hernández, C. Orozco-Alvarez, Tribological behavior of borided AISI 316L steel with reduced friction coefficient and enhanced wear resistance. Mater. Trans. 60(1), 156–164 (2019). https://doi.org/10.2320/matertrans.M201828210.2320/matertrans.M2018282 ↗
35. E. Simooğlu Sari, M. Zeren, F.G. Gül Koç, The effect of different powder mixtures used in the boriding process on the surface properties of AISI 304 stainless steel material. Mater. Res. Express 11, 066511 (2024). https://doi.org/10.1088/2053-1591/ad526a10.1088/2053-1591/ad526a ↗
36. N. Manthani N, A. Joshi A, V. Pawar V, R. Singh R (2018) Improvement in Wear Resistance of AISI H13 Steel by Pack-Boronizing Method. Journal of Nanoscience and Nanotechnology Research. 2(1):1–4. http://www.imedpub.com/journal-nanoscience-nanotechnology-research/
37. I. Ozbek, C. Bindal, Mechanical properties of boronized AISI W4 steel. Surf. Coat. Technol. 154(1), 14–20 (2002). https://doi.org/10.1016/S0257-8972(01)01409-810.1016/S0257-8972(01)01409-8 ↗
38. M. Carbucicchio, G. Sambagna, Influence of chromium on boride coatings produced on iron alloys. Thin Solid Films 125, 299–305 (1985). https://doi.org/10.1016/0040-6090(85)90324-410.1016/0040-6090(85)90324-4 ↗
39. D.I. Zagkliveris, A. Mavropoulos, G.K. Triantafyllidis, Corrosion behavior of boronized and borochromized AISI 4140 steel after acid exposure evaluated by electrochemical impedance spectroscopy. J. Mater. Eng. Perform. 32(19), 8831–8845 (2023). https://doi.org/10.1007/s11665-023-07940-310.1007/s11665-023-07940-3 ↗
40. S. Alkan, A. Günen, M. Gülen, M.S. Gok, Effect of boriding on tribocorrosion behaviour of HSLA offshore mooring chain steel. Surf. Coat. Technol. 476, 130276 (2024). https://doi.org/10.1016/j.surfcoat.2023.13027610.1016/j.surfcoat.2023.130276 ↗
41. A. Milinovič, J. Stojšič, I. Kladarič, B. Matijevič, Evaluation of boride layers on C70W2 steel using a new approach to characterization of boride layers. Materials 15, 3891 (2022). https://doi.org/10.3390/ma1511389110.3390/ma15113891 ↗
42. C. Meric, S. Sahin, B. Backir, N.S. Koksal, Investigation of the boronizing effect on the abrasive wear behavior in cast irons. Mater. Des. 27(9), 751–757 (2006). https://doi.org/10.1016/j.matdes.2005.01.01810.1016/j.matdes.2005.01.018 ↗
43. V. Jain, G. Sundararajan, Influence of the pack thickness of the boronizing mixture on the boriding of steel. Surf. Coat. Technol. 149, 21–26 (2002). https://doi.org/10.1016/S0257-8972(01)01385-810.1016/S0257-8972(01)01385-8 ↗
44. A.M. Delgado-Brito, D. Lopez-Suero, A. Ruiz-Ríos, R.A. García-Leon, J. Martínez-Trinidad, J. Oseguera-Peňa, I. Campos-Silva, Effect of the diffusion annealing process in the indentation properties of cobalt boride layer. Ceram. Int. 45, 7767–7777 (2019). https://doi.org/10.1016/j.ceramint.2019.01.08110.1016/j.ceramint.2019.01.081 ↗
45. I. Campos-Silva, A.D. Contla-Pacheco, V.H. Castrejon-Sánchez, A.M. Delgado-Brito, A. Garduno-Alva, D. Lopez-Suero, J. Martínez-Trinidad, Wear and scratch resistance of cobalt boride layer exposed to a diffusion annealing process. Mater. Perform. Charact. 9, 20190101 (2020). https://doi.org/10.1520/MPC2019010110.1520/MPC20190101 ↗
46. K. Genel, Boriding kinetics of H13 steel. Vacuum 80, 451–457 (2006). https://doi.org/10.1016/j.vacuum.2005.07.01310.1016/j.vacuum.2005.07.013 ↗
47. B. Boumaali, Z. Nait Abdellah, M. Keddam, Characterization of bilayer (FeB/Fe2B) on AISI H13 hot work tool steel. Koroze Ochr. Mater. 65(2), 40–48 (2021). https://doi.org/10.2478/kom-2021-000510.2478/kom-2021-0005 ↗
48. A. Günen, İH. Karahan, M.S. Karakaş, B. Kurt, Y. Kanca, V.V. Çay, M. Yıldız, Properties and corrosion resistance of AISI H13 hot-work tool steel with borided B4C powders. Metals and Mater. Int. 26(9), 1329–1340 (2020). https://doi.org/10.1007/s12540-019-00421-010.1007/s12540-019-00421-0 ↗
49. A.P. Krelling, J.C.G. Milan, C.E. da Costa, Tribological behaviour of borided H13 steel with different boriding agents. Surf. Eng. 31(8), 581–587 (2014). https://doi.org/10.1179/1743294414Y.000000042310.1179/1743294414Y.0000000423 ↗
50. M. Ortiz-Domínguez, M. Elias-Espinosa, M. Keddam, A. Gómez-Vargas, R. Lewis, E. Vera-Cardénas, Growth kinetics and mechanical properties of Fe2B layers formed on AISI D2 steel. Indian J. Eng. Mater. Sci. 22, 231–243 (2015)
51. A. Yapici, S.E. Aydin, V. Koc, E. Kanca, M. Yildiz, Wear behavior of borided AISI D2 steel under linear reciprocating sliding conditions. Prot. Met. Phys. Chem. Surf. 55, 341–351 (2019). https://doi.org/10.1134/S207020511902028X10.1134/S207020511902028X ↗
52. V.I. Dybkov, Basics of formation of iron boride coatings. J. Miner. Metal and Mater. Eng. 2, 30–46 (2018). https://doi.org/10.20941/2414-2115.2016.02.510.20941/2414-2115.2016.02.5 ↗
53. J. Lentz, A. Röttger, F. Großwendt, W. Theisen, Enhancement of hardness, modulus and fracture toughness of the tetragonal (Fe,Cr)2B and orthorhombic (Cr,Fe)2B phases with addition of Cr. Mater. Design. 156, 113–124 (2018). https://doi.org/10.1016/j.matdes.2018.06.04010.1016/j.matdes.2018.06.040 ↗
54. K. Benyakoub, K. Keddam, J. Ptačinová, Z. Gabalcová, B. Boumaali, P. Jurci, Boride layers on Sverker 3 steel: kinetic modeling, experimental characterization, and validation. Prot. Met. Phys. Chem. Surf. 59(6), 1250–1259 (2023). https://doi.org/10.1134/S207020512370111310.1134/S2070205123701113 ↗
55. S. Demirci, M.M. Tünçay, Growth kinetics of borided 316L stainless steel obtained by selective laser melting. J. Cent. South Univ. 32, 332–349 (2025). https://doi.org/10.1007/s11771-024-5733-110.1007/s11771-024-5733-1 ↗
56. F. Žanetič, D. Landek, B. Matijevic, J. Jacan, Boride layer growth kinetics on X90CrMoV-18 steel. Mater. Technol. 58(3), 295–300 (2024). https://doi.org/10.17222/mit.2023.106410.17222/mit.2023.1064 ↗
57. R. Hariharan, R. Balasundaram, K. Lenin, D.J. Jefrey, Enhancing the surface characteristics of Nitronic-50 through pack boronizing. Chem. Pap. 79, 4303–4316 (2025). https://doi.org/10.1007/s11696-025-04057-w10.1007/s11696-025-04057-w ↗
58. Y. Boonplook, P. Juijerm, Prediction of boride thickness on tool steels AISI D2 and AISI H13 using boriding kinetics. Adv. Mater. Res. 931–932, 296–300 (2014). https://doi.org/10.4028/www.scientific.net/AMR.931-932.29610.4028/www.scientific.net/AMR.931-932.296 ↗
59. S. Mei, Y. Zhang, Q. Zheng, Y. Fan, B. Lygdenov, A. Guryev, Compound boronizing and its kinetics analysis for H13 steel with rare earth CeO2 and Cr2O3. Appl. Sci. 12, 3636 (2022). https://doi.org/10.3390/app1207363610.3390/app12073636 ↗
60. M. Ortiz-Domínguez, M. Keddam, A.J. Morales-Robles, Characterizations and boron diffusion modelling on the AISI H13 steel. J. Min. Metallurgy Sect. B-Metallurgy. 60(3), 353–365 (2024). https://doi.org/10.2298/JMMB240423029O10.2298/JMMB240423029O ↗