Characteristic investigation of carbon/ceramic-based functionally graded multilayered composite materials
Source abstract
Abstract
This research article focused on 3D-printed multilayered polymer composite materials, with a particular emphasis on ceramic and carbon polymer composite materials. To evaluate the mechanical performance of a multilayered composite structure, ceramic polymer composite (CPC) materials were used layer by layer with carbon-reinforced polymer composite (CRPC) layers. Tensile, compression, flexural, and differential scanning calorimetry tests were carried out on 3D-printed CPC, CRPC, and Functionally Graded Multilayered Material (FGMLM) composite structures. The results indicated that FGMLM laminates exhibited increases of 12.4%, 6.4%, and 9.8% in tensile, flexural, and compressive strength, respectively, compared with CRPC laminates; these experimental values were validated by finite element analysis. Further, fractography analysis of the FGMLM was carried out using scanning electron microscopy to provide insights into the structural characteristics. It was indicated that strong interfacial bonding was found between the laminated carbon and ceramic layers.Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Material Properties and Applications · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Z. Ali, Y. Yan, H. Mei, L. Cheng, L. Zhang, Compos. Struct. 304, 116370 (2023). https://doi.org/10.1016/j.compstruct.2022.11637010.1016/j.compstruct.2022.116370 ↗
2. A.F. Calles, D. Carou, R.T.L. Ferreira, Appl. Compos. Mater. 29(3), 937–952 (2022). https://doi.org/10.1007/s10443-021-09996-710.1007/s10443-021-09996-7 ↗
3. D. Filgueira, S. Holmen, J.K. Melbø, D. Moldes, A.T. Echtermeyer, G. Chinga-Carrasco, Polymers 10(3), 314 (2018). https://doi.org/10.3390/polym1003031410.3390/polym10030314 ↗
4. M. Mani, K.W. Lyons, S.K. Gupta, J. Res. Natl. Inst. Stand. Technol. 119, 419–428 (2014). https://doi.org/10.6028/jres.119.01610.6028/jres.119.016 ↗
5. P. Wang, B. Zou, S. Ding, C. Huang, Z. Shi, Y. Ma, P. Yao, Compos. B Eng. 198, 108175 (2020). https://doi.org/10.1016/j.compositesb.2020.10817510.1016/j.compositesb.2020.108175 ↗
6. T.D. Ngo, A. Kashani, G. Imbalzano, K.T.Q. Nguyen, D. Hui, Compos. B Eng. 143, 172–196 (2018). https://doi.org/10.1016/j.compositesb.2018.02.01210.1016/j.compositesb.2018.02.012 ↗
7. B.C. Kikuchi, F.L.S. Bussamra, M.V. Donadon, R.T.L. Ferreira, R.C.M. Sales, Polym. Compos. 41(12), 5227–5245 (2020). https://doi.org/10.1002/pc.2578910.1002/pc.25789 ↗
8. N. van de Werken, H. Tekinalp, P. Khanbolouki, S. Ozcan, A. Williams, M. Tehrani, Addit. Manuf. (2020). https://doi.org/10.1016/j.addma.2019.10096210.1016/j.addma.2019.100962 ↗
9. F. Ning, W. Cong, J. Qiu, J. Wei, S. Wang, “Compos” B 80, 369–378 (2015)10.1016/j.compositesb.2015.06.013 ↗
10. M. Heidari-Rarani, M. Rafiee-Afarani, A.M. Zahedi, Compos. B Eng. 175, 107147 (2019). https://doi.org/10.1016/j.compositesb.2019.10714710.1016/j.compositesb.2019.107147 ↗
11. X. Yi, Z.J. Tan, W.J. Yu, J. Li, B.J. Li, B.Y. Huang, J. Liao, Carbon 96, 603–607 (2016). https://doi.org/10.1016/j.carbon.2015.09.11010.1016/j.carbon.2015.09.110 ↗
12. J. Bochnia, M. Blasiak, T. Kozior, Materials (Basel) 14(22), 7062 (2021). https://doi.org/10.3390/ma1422706210.3390/ma14227062 ↗
13. E. Kargar, A. Ghasemi-Ghalebahman, Sci. Rep. 13(1), 18194 (2023). https://doi.org/10.1038/s41598-023-45046-x10.1038/s41598-023-45046-x ↗
14. M. Saleh, S. Anwar, A.Y. AlFaify, A.M. Al-Ahmari, A.E.E. Abd Elgawad, J. Mater. Res. Technol. 29, 2768–2780 (2024). https://doi.org/10.1016/j.jmrt.2024.01.26710.1016/j.jmrt.2024.01.267 ↗
15. M. Ramesh, A. Karthik, D.J.D. James, G.K. Pandiyan, Mater. Res. Express. 10, 085305 (2023). https://doi.org/10.1088/2053-1591/acf1f110.1088/2053-1591/acf1f1 ↗
16. N.P. Bansal, Handbook of Ceramic Composites, Chapter 6, 117–148 (2005). https://doi.org/10.1007/0-387-23986-3_610.1007/0-387-23986-3_6 ↗
17. R. Weiss, ed. by W. Krenkel, R. Naslain, H. Schneider (Wiley-VCH, Weinheim, 2001), pp. 440–456
18. A. U. Basha, M. R. Singh, S. kumari, S. Prasad, V. V. Bhanu Prasad, in ed. by Y. Mahajan, J. Roy. Handbook of advanced ceramics and composites (Springer, Cham, 2020), https://doi.org/10.1007/978-3-319-73255-8_26-110.1007/978-3-319-73255-8_26-1 ↗
19. I. Bianchi, A. Forcellese, M. Simoncini, A. Vita, L. Delledonne, V. Castorani, J. Cleaner Prod. 413, 137537 (2023). https://doi.org/10.1016/j.jclepro.2023.13753710.1016/j.jclepro.2023.137537 ↗
20. Z. Liu, Q. Lei, S. Xing, J. Mater. Res. Technol. 8(5), 3741–3751 (2019). https://doi.org/10.1016/j.jmrt.2019.06.03410.1016/j.jmrt.2019.06.034 ↗
21. Z. Chen, Z. Li, J. Li, C. Liu, C. Lao, Y. Fu, C. Liu, Y. Li, P. Wang, Y. He, J. Eur. Ceram. Soc. 39(4), 661–687 (2019). https://doi.org/10.1016/j.jeurceramsoc.2018.11.01310.1016/j.jeurceramsoc.2018.11.013 ↗
22. G. Varghese, M. Moral, M. Castro-García, J.J. López-López, J.R. Marín-Rueda, V. Yagüe-Alcaraz, L. Hernández-Afonso, J.C. Ruiz-Morales, J. Canales-Vázquez, Bol. Soc. Española Ceram. Vidrio 57(1), 9–18 (2018). https://doi.org/10.1016/j.bsecv.2017.09.00410.1016/j.bsecv.2017.09.004 ↗
23. U.K. Roopavath, S. Malferrari, A. Van Haver, F. Verstreken, S.N. Rath, D.M. Kalaskar, Mater. Des. 162, 263–270 (2019). https://doi.org/10.1016/j.matdes.2018.11.05410.1016/j.matdes.2018.11.054 ↗
24. C. Schopper, F. Ziya-Ghazvini, W. Goriwoda, D. Moser, F. Wanschitz, E. Spassova, G. Lagogiannis, A. Auterith, R. Ewers, J. Biomed. Mater. Res. B Appl. Biomater. 74(1), 458–467 (2005). https://doi.org/10.1002/jbm.b.3019910.1002/jbm.b.30199 ↗
25. S. Bose, D. Banerjee, A. Shivaram, S. Tarafder, A. Bandyopadhyay, Mater. Des. 151, 102–112 (2018). https://doi.org/10.1016/j.matdes.2018.04.04910.1016/j.matdes.2018.04.049 ↗
26. M.K. Subramaniyan, S. Thanigainathan, V. Elumalai, Proc. Inst. Mech. Eng. (2023). https://doi.org/10.1177/0954408923120579110.1177/09544089231205791 ↗
27. M.K. Subramaniyan, D. Veeman, S.G.J. Kennedy, B. Panda, C. Yang, Proc. Inst. Mech. Eng. (2023). https://doi.org/10.1177/0954408923116649710.1177/09544089231166497 ↗
28. A. Thirugnanasamabandam, M. Subramaniyan, B. Prabhu, K. Ramachandran, Development and comprehensive investigation on PLA/carbon fiber reinforced PLA based structurally alternate layered polymer composites. J Ind Eng Chem (2024). https://doi.org/10.1016/j.jiec.2024.02.01210.1016/j.jiec.2024.02.012 ↗
29. T. Arunkumar, H. Dutta, H. Puttaiah, Mechanical and thermal characterization of additively manufactured novel multilayer polymer composite through experiments and finite element simulation. Mech. Adv. Mater. Struct. 3, 1–13 (2024). https://doi.org/10.1080/15376494.2024.233565410.1080/15376494.2024.2335654 ↗
30. M. Yunus, M.S. Alsoufi, Int. J. Biomater. 2018, 9283291 (2018). https://doi.org/10.1155/2018/928329110.1155/2018/9283291 ↗
31. R. Govender, E.O. Kissi, A. Larsson, I. Tho, Adv. Drug Deliv. Rev. 177, 113923 (2021). https://doi.org/10.1016/j.addr.2021.11392310.1016/j.addr.2021.113923 ↗
32. N. Bouamer Benrekaa, A. Younes, Mater. Today Proc. 42(5), 2959–2962 (2021). https://doi.org/10.1016/j.matpr.2020.12.80310.1016/j.matpr.2020.12.803 ↗
33. W. Huang, H. Xu, Z. Fan, W. Jiang, J. Liu, Compos. Sci. Technol. 193, 108143 (2020). https://doi.org/10.1016/j.compscitech.2020.10814310.1016/j.compscitech.2020.108143 ↗
34. Z. Abbas, M. Dapporto, A. Tampieri, S. Sprio, J. Compos. Sci. 5(10), 259 (2021). https://doi.org/10.3390/jcs510025910.3390/jcs5100259 ↗
35. C. Wang, L. Xia, B. Zhong, H. Yang, L. Huang, L. Xiong, X. Huang, G. Wen, J. Eur. Ceram. Soc. 39(15), 4625–4633 (2019). https://doi.org/10.1016/j.jeurceramsoc.2019.06.03510.1016/j.jeurceramsoc.2019.06.035 ↗
36. J. Xin, X. Meng, X. Xu, Q. Zhu, H.B. Naveed, W. Ma, Matter 1(5), 1316–1330 (2019). https://doi.org/10.1016/j.matt.2019.06.01110.1016/j.matt.2019.06.011 ↗
37. L. Rabelo, R. Munhoz, J. Marini, S. Maestrelli, Mater. Res. (2022). https://doi.org/10.1590/1980-5373-mr-2021-044410.1590/1980-5373-mr-2021-0444 ↗
38. M.K. Subramaniyan, D. Veeman, M. Vellaisamy, M.A. Browne, B.P. Patil, Materialwiss. Werkstofftech. 54(12), 1514–1522 (2023). https://doi.org/10.1002/mawe.20220029310.1002/mawe.202200293 ↗
39. X. Li, M. Ghasri-Khouzani, A.A. Bogno, J. Liu, H. Henein, Z. Chen, A.J. Qureshi, Materials 14, 3654 (2021). https://doi.org/10.3390/ma1413365410.3390/ma14133654 ↗
40. P. Jedrasiak, H. Shercliff, S. Mishra, J. Mater. Eng. Perform. 31, 7160–7175 (2022). https://doi.org/10.1007/s11665-022-06750-310.1007/s11665-022-06750-3 ↗