Hydroxyapatite coating promotes stable physicochemical properties of pure magnesium in a longitudinal degradation study
Source abstract
Abstract
Magnesium is attractive for orthopedic implants because of its similar mechanical properties to those of bone but often degrades too rapidly. Coatings such as hydroxyapatite (HA), the mineral component of bone, are useful for modulating degradation, thereby enhancing osseointegration and biocompatibility. The goal of this study was to longitudinally evaluate the effects of solution-deposited HA coating on magnesium degradation. We hypothesized the HA coating would be stable, slowing the degradation of pure magnesium. Analyses of mass; solution pH; magnesium in solution; surface morphology, chemistry, and roughness; and cytotoxicity were performed through 30 days. Despite morphological changes in the HA coating beginning at day 20, the mass, elemental composition, and surface roughness of the HA-coated group were unchanged through 30 days, demonstrating the stability of the coating and its ability to mitigate degradation of the underlying magnesium. This work provides longitudinal insight into the biodegradation of HA-coated magnesium for orthopedic implants.Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. M. Navarro, A. Michiardi, O. Castaño, J.A. Planell, Biomaterials in orthopaedics. J. R. Soc. Interface. 5, 1137–1158 (2008). https://doi.org/10.1098/rsif.2008.015110.1098/rsif.2008.0151 ↗
2. M. Niinomi, M. Nakai, Titanium-based biomaterials for preventing stress shielding between implant devices and bone. Int. J. Biomater. (2011). https://doi.org/10.1155/2011/83658710.1155/2011/836587 ↗
3. D.L. Millis, Responses of musculoskeletal tissues to disuse and remobilization. Canine Rehabil. Phys. Ther. (2013). https://doi.org/10.1016/B978-1-4377-0309-2.00007-710.1016/B978-1-4377-0309-2.00007-7 ↗
4. I.I. Onche, O.E. Osagie, S. Inuhu, Removal of orthopaedic implants: indications, outcome and economic implications. J. West Afr. Coll. Surg. 1, 101–112 (2011)
5. F. Witte, H. Ulrich, C. Palm, E. Willbold, Biodegradable magnesium scaffolds: Part II: Peri-implant bone remodeling. J. Biomed. Mater. Res. Part A 81A, 757–765 (2007). https://doi.org/10.1002/jbm.a.3129310.1002/jbm.a.31293 ↗
6. B.D. Hahn, D.S. Park, J.J. Choi, J. Ryu, W.H. Yoon, J.H. Choi, H.E. Kim, S.G. Kim, Aerosol deposition of hydroxyapatite–chitosan composite coatings on biodegradable magnesium alloy. Surf. Coatings Technol. 205, 3112–3118 (2011). https://doi.org/10.1016/j.surfcoat.2010.11.02910.1016/j.surfcoat.2010.11.029 ↗
7. J.C. Middleton, A.J. Tipton, Synthetic biodegradable polymers as orthopedic devices. Biomaterials 21, 2335–2346 (2000). https://doi.org/10.1016/S0142-9612(00)00101-010.1016/S0142-9612(00)00101-0 ↗
8. J.W. Lee, H.S. Han, K.J. Han, J. Park, H. Jeon, M.R. Ok, H.K. Seok, J.P. Ahn, K.E. Lee, D.H. Lee, S.J. Yang, S.Y. Cho, P.R. Cha, H. Kwon, T.H. Nam, J.H. Lo Han, H.J. Rho, K.S. Lee, Y.C. Kim, D. Mantovani, Long-term clinical study and multiscale analysis of in vivo biodegradation mechanism of Mg alloy. Proc. Natl. Acad. Sci. USA 113, 716–721 (2016). https://doi.org/10.1073/pnas.151823811310.1073/pnas.1518238113 ↗
9. F. Mammoli, S. Castiglioni, S. Parenti, C. Cappadone, G. Farruggia, S. Iotti, P. Davalli, J.A.M. Maier, A. Grande, C. Frassineti, Magnesium is a key regulator of the balance between osteoclast and osteoblast differentiation in the presence of vitamin D3. Int. J. Mol. Sci. (2019). https://doi.org/10.3390/ijms2002038510.3390/ijms20020385 ↗
10. I. Marco, A. Myrissa, E. Martinelli, F. Feyerabend, R. Willumeit-Römer, A.M. Weinberg, O. VanderBiest, In vivo and in vitro degradation comparison of pure MG, MG-10GD and MG-2AG: A short term study. Eur. Cells Mater. 33, 90–104 (2017). https://doi.org/10.22203/eCM.v033a0710.22203/eCM.v033a07 ↗
11. F. Witte, V. Kaese, H. Haferkamp, E. Switzer, A. Meyer-Lindenberg, C.J. Wirth, H. Windhagen, In vivo corrosion of four magnesium alloys and the associated bone response. Biomaterials 26, 3557–3563 (2005). https://doi.org/10.1016/j.biomaterials.2004.09.04910.1016/j.biomaterials.2004.09.049 ↗
12. Y.K. Kim, K.B. Lee, S.Y. Kim, K. Bode, Y.S. Jang, T.Y. Kwon, M.H. Jeon, M.H. Lee, Gas formation and biological effects of biodegradable magnesium in a preclinical and clinical observation. Sci. Technol. Adv. Mater. 19, 324–335 (2018). https://doi.org/10.1080/14686996.2018.145171710.1080/14686996.2018.1451717 ↗
13. R. Radha, D. Sreekanth, Insight of magnesium alloys and composites for orthopedic implant applications—A review. J. Magnes. Alloy 5, 286–312 (2017). https://doi.org/10.1016/j.jma.2017.08.00310.1016/j.jma.2017.08.003 ↗
14. R. Marsell, T.A. Einhorn, The biology of fracture healing. Injury 42, 551–555 (2011). https://doi.org/10.1016/j.injury.2011.03.03110.1016/j.injury.2011.03.031 ↗
15. M.S. Ghiasi, J. Chen, A. Vaziri, E.K. Rodriguez, A. Nazarian, Bone fracture healing in mechanobiological modeling: A review of principles and methods. Bone Reports. 6, 87–100 (2017). https://doi.org/10.1016/j.bonr.2017.03.00210.1016/j.bonr.2017.03.002 ↗
16. M. Thomann, C. Krause, D. Bormann, N. Von Der Höh, H. Windhagen, A. Meyer-Lindenberg, Comparison of the resorbable magnesium alloys LAE442 und MgCa0.8 concerning their mechanical properties, their progress of degradation and the bone-implant-contact after 12 months implantation duration in a rabbit model. Materwiss. Werksttech. 40, 82–87 (2009). https://doi.org/10.1002/mawe.20080041210.1002/mawe.200800412 ↗
17. E. Bütev Öcal, Z. Esen, K. Aydınol, A.F. Dericioğlu, Comparison of the short and long-term degradation behaviors of as-cast pure Mg, AZ91 and WE43 alloys. Mater. Chem. Phys. 241, 122350 (2020). https://doi.org/10.1016/j.matchemphys.2019.12235010.1016/j.matchemphys.2019.122350 ↗
18. R. Walter, M.B. Kannan, In-vitro degradation behaviour of WE54 magnesium alloy in simulated body fluid. Mater. Lett. 65, 748–750 (2011). https://doi.org/10.1016/j.matlet.2010.11.05110.1016/j.matlet.2010.11.051 ↗
19. C. Liu, Z. Ren, Y. Xu, S. Pang, X. Zhao, Y. Zhao, biodegradable magnesium alloys developed as bone repair materials: A review. Scanning (2018). https://doi.org/10.1155/2018/921631410.1155/2018/9216314 ↗
20. M. Braic, A. Vladescu, T.M. Mukhametkaliyev, I. Pana, C.M. Cotrut, M. Dinu, M. Mueller, M.D. Vranceanu, M.A. Surmeneva, R.A. Surmenev, A biodegradable AZ91 magnesium alloy coated with a thin nanostructured hydroxyapatite for improving the corrosion resistance. Mater. Sci. Eng. C 75, 95–103 (2017). https://doi.org/10.1016/j.msec.2017.02.03310.1016/j.msec.2017.02.033 ↗
21. S. Hiromoto, M. Inoue, T. Taguchi, M. Yamane, N. Ohtsu, In vitro and in vivo biocompatibility and corrosion behaviour of a bioabsorbable magnesium alloy coated with octacalcium phosphate and hydroxyapatite. Acta Biomater. 11, 520–530 (2015). https://doi.org/10.1016/j.actbio.2014.09.02610.1016/j.actbio.2014.09.026 ↗
22. S. Hiromoto, A. Yamamoto, High corrosion resistance of magnesium coated with hydroxyapatite directly synthesized in an aqueous solution. Electrochim. Acta. 54, 7085–7093 (2009). https://doi.org/10.1016/J.ELECTACTA.2009.07.03310.1016/J.ELECTACTA.2009.07.033 ↗
23. R.R. Kottuparambil, S. Bontha, R.M. Rangarasaiah, S.B. Arya, A. Jana, M. Das, V.K. Balla, S. Amrithalingam, T.R. Prabhu, Effect of zinc and rare-earth element addition on mechanical, corrosion, and biological properties of magnesium. J. Mater. Res. 2018(33), 3466–3478 (2018). https://doi.org/10.1557/JMR.2018.31110.1557/JMR.2018.311 ↗
24. J. Wang, J. Tang, P. Zhang, Y. Li, J. Wang, Y. Lai, L. Qin, Surface modification of magnesium alloys developed for bioabsorbable orthopedic implants: A general review. J. Biomed. Mater. Res. Part B 100, 1691–1701 (2012). https://doi.org/10.1002/jbm.b.3270710.1002/jbm.b.32707 ↗
25. F. Zhang, S. Cai, G. Xu, S. Shen, Y. Li, M. Zhang, X. Wu, Corrosion behavior of mesoporous bioglass-ceramic coated magnesium alloy under applied forces. J. Mech. Behav. Biomed. Mater. 56, 146–155 (2016). https://doi.org/10.1016/j.jmbbm.2015.11.02910.1016/j.jmbbm.2015.11.029 ↗
26. Y.K. Kim, K.B. Lee, S.Y. Kim, Y.S. Jang, J.H. Kim, M.H. Lee, Improvement of osteogenesis by a uniform PCL coating on a magnesium screw for biodegradable applications. Sci. Rep. (2018). https://doi.org/10.1038/s41598-018-31359-910.1038/s41598-018-31359-9 ↗
27. L. Xu, A. Yamamoto, Characteristics and cytocompatibility of biodegradable polymer film on magnesium by spin coating. Colloids Surf. B 93, 67–74 (2012). https://doi.org/10.1016/j.colsurfb.2011.12.00910.1016/j.colsurfb.2011.12.009 ↗
28. A. Drynda, T. Hassel, R. Hoehn, A. Perz, F.-W. Bach, M. Peuster, Development and biocompatibility of a novel corrodible fluoride-coated magnesium-calcium alloy with improved degradation kinetics and adequate mechanical properties for cardiovascular applications. J. Biomed. Mater. Res. Part A (2009). https://doi.org/10.1002/jbm.a.3258210.1002/jbm.a.32582 ↗
29. P. Sikder, Y. Ren, S.B. Bhaduri, Synthesis and evaluation of protective poly(lactic acid) and fluorine-doped hydroxyapatite–based composite coatings on AZ31 magnesium alloy. J. Mater. Res. 2019(34), 3766–3776 (2019). https://doi.org/10.1557/JMR.2019.31710.1557/JMR.2019.317 ↗
30. A. Zomorodian, M.P. Garcia, T. Moura E Silva, J.C.S. Fernandes, M.H. Fernandes, M.F. Montemor, Biofunctional composite coating architectures based on polycaprolactone and nanohydroxyapatite for controlled corrosion activity and enhanced biocompatibility of magnesium AZ31 alloy. Mater. Sci. Eng. C. 48, 434–443 (2015). https://doi.org/10.1016/j.msec.2014.12.02710.1016/j.msec.2014.12.027 ↗
31. Y. Jiang, L. Zhu, S. Cai, S. Shen, Y. Li, S. Jiang, Y. Lin, S. Hua, R. Ling, G. Xu, Corrosion-resistant fluoridated Ca–Mg–P composite coating on magnesium alloys prepared via hydrothermal assisted sol–gel process. J. Mater. Res. 2018(33), 3793–3800 (2018). https://doi.org/10.1557/JMR.2018.27010.1557/JMR.2018.270 ↗
32. J.L. Merlo, R. Detsch, S. Ceré, A.R. Boccaccini, J. Ballarre, Degradable magnesium implants: Improving bioactive and antibacterial performance by designed hybrid coatings. J. Mater. Res. 2021(36), 443–458 (2021). https://doi.org/10.1557/S43578-020-00099-W10.1557/S43578-020-00099-W ↗
33. X. Zhang, X.W. Li, J.G. Li, X.D. Sun, Preparation and characterizations of bioglass ceramic cement/ca-p coating on pure magnesium for biomedical applications. ACS Appl. Mater. Interfaces 6, 513–525 (2014). https://doi.org/10.1021/am404574t10.1021/am404574t ↗
34. M. Alizadeh-Osgouei, Y. Li, C. Wen, A comprehensive review of biodegradable synthetic polymer–ceramic composites and their manufacture for biomedical applications. Bioact. Mater. 4, 22–36 (2019). https://doi.org/10.1016/j.bioactmat.2018.11.00310.1016/j.bioactmat.2018.11.003 ↗
35. W. Kozuma, K. Kon, S. Kawakami, A. Bobothike, H. Iijima, M. Shiota, S. Kasugai, Osteoconductive potential of a hydroxyapatite fiber material with magnesium: In vitro and in vivo studies. Dent. Mater. J. 38, 771–778 (2019). https://doi.org/10.4012/dmj.2018-33310.4012/dmj.2018-333 ↗
36. S.-M. Kim, J.-H. Jo, S.-M. Lee, M.-H. Kang, H.-E. Kim, Y. Estrin, J.-H. Lee, J.-W. Lee, Y.-H. Koh, Hydroxyapatite-coated magnesium implants with improved in vitro and in vivo biocorrosion, biocompatibility, and bone response. J. Biomed. Mater. Res. Part A 102, 429–441 (2014). https://doi.org/10.1002/jbm.a.3471810.1002/jbm.a.34718 ↗
37. A.F. Mavrogenis, R. Dimitriou, J. Parvizi, G.C. Babis, Biology of implant osseointegration. J. Musculoskelet. Neuronal Interact. 9, 61–71 (2009)
38. S.A. Salman, K. Kuroda, M. Okido, Preparation and characterization of hydroxyapatite coating on AZ31 Mg alloy for implant applications. Bioinorg. Chem. Appl. 13, 175756 (2013). https://doi.org/10.1155/2013/17575610.1155/2013/175756 ↗
39. M.M. Hassan, Antimicrobial Coatings for Textiles (Elsevier, Amsterdam, 2017), pp. 321–355
40. J.A. Juhasz, S.M. Best, Surface modification of biomaterials by calcium phosphate deposition. Surf. Modif. Biomater. Methods Anal. Appl. (2011). https://doi.org/10.1533/9780857090768.1.14310.1533/9780857090768.1.143 ↗
41. J. Chen, Y. Yang, I.P. Etim, L. Tan, K. Yang, R.D.K. Misra, J. Wang, X. Su, A. Sorrentino, Recent advances on development of hydroxyapatite coating on biodegradable magnesium alloys: A review. Materials (2021). https://doi.org/10.3390/ma1419555010.3390/ma14195550 ↗
42. Preparation and corrosion behaviors of calcium phosphate conversion coating on magnesium alloy | Elsevier Enhanced Reader, (n.d.). https://reader.elsevier.com/reader/sd/pii/S0257897216308192?token=933915B4BEF1BC66EC389883C265907A14E82379C4C55DDFF2EEAFF3864180ED5422E9C8358C027DE801685E1CB14A15&originRegion=us-east-1&originCreation=20220104173616 (accessed January 4, 2022).
43. Solution Deposition of Hydroxyapatite on a Highly Porous Titanium Surface Enhances Osseointegration - Google Search, (n.d.). https://www.google.com/search?q=Solution+Deposition+of+Hydroxyapatite+on+a+Highly+Porous+Titanium+Surface+Enhances+Osseointegration&rlz=1C1CHBF_enUS904US906&oq=Solution+Deposition+of+Hydroxyapatite+on+a+Highly+Porous+Titanium+Surface+Enhances+Osseointegration&aqs=chrome..69i57.378j0j9&sourceid=chrome&ie=UTF-8 (accessed January 6, 2022).
44. R.A. Lindtner, C. Castellani, S. Tangl, G. Zanoni, P. Hausbrandt, E.K. Tschegg, S.E. Stanzl-Tschegg, A.M. Weinberg, Comparative biomechanical and radiological characterization of osseointegration of a biodegradable magnesium alloy pin and a copolymeric control for osteosynthesis. J. Mech. Behav. Biomed. Mater. 28, 232–243 (2013). https://doi.org/10.1016/J.JMBBM.2013.08.00810.1016/J.JMBBM.2013.08.008 ↗
45. S. Hiromoto, M. Tomozawa, Hydroxyapatite coating of AZ31 magnesium alloy by a solution treatment and its corrosion behavior in NaCl solution. Surf. Coatings Technol. 205, 4711–4719 (2011). https://doi.org/10.1016/J.SURFCOAT.2011.04.03610.1016/J.SURFCOAT.2011.04.036 ↗
46. I. Rehm, W. Bonfield, Characterization of hydroxyapatite and carbonated apatite by photo acoustic FTIR spectroscopy, 1997.
47. M. Pogorielov, E. Husak, A. Solodivnik, S. Zhdanov, Magnesium-based biodegradable alloys: Degradation, application, and alloying elements. Interv. Med. Appl. Sci. 9, 27–38 (2017). https://doi.org/10.1556/1646.9.2017.1.0410.1556/1646.9.2017.1.04 ↗
48. J. Gonzalez, R.Q. Hou, E.P.S. Nidadavolu, R. Willumeit-Römer, F. Feyerabend, Magnesium degradation under physiological conditions – Best practice. Bioact. Mater. 3, 174–185 (2018). https://doi.org/10.1016/j.bioactmat.2018.01.00310.1016/j.bioactmat.2018.01.003 ↗
49. M. Tomozawa, S. Hiromoto, Growth mechanism of hydroxyapatite-coatings formed on pure magnesium and corrosion behavior of the coated magnesium. Appl. Surf. Sci. 257, 8253–8257 (2011). https://doi.org/10.1016/j.apsusc.2011.04.08710.1016/j.apsusc.2011.04.087 ↗
50. S. Wen, X. Liu, J. Ding, Y. Liu, Z. Lan, Z. Zhang, G. Chen, Hydrothermal synthesis of hydroxyapatite coating on the surface of medical magnesium alloy and its corrosion resistance. Prog. Nat. Sci. Mater. Int. 31, 324–333 (2021). https://doi.org/10.1016/J.PNSC.2020.12.01310.1016/J.PNSC.2020.12.013 ↗
51. T.T. Li, L. Ling, M.C. Lin, Q. Jiang, Q. Lin, J.H. Lin, C.W. Lou, Properties and mechanism of hydroxyapatite coating prepared by electrodeposition on a braid for biodegradable bone scaffolds. Nanomaterials (2019). https://doi.org/10.3390/nano905067910.3390/nano9050679 ↗
52. T.T. Hoai, N.K. Nga, L.T. Giang, T. QuangHuy, P. Nguyen, M. Tuan, B. Thi, T. Binh, Hydrothermal synthesis of hydroxyapatite nanorods for rapid formation of bone-like mineralization. J. Electr. Mater. 46(8), 5064–5072 (2017). https://doi.org/10.1007/s11664-017-5509-610.1007/s11664-017-5509-6 ↗
53. H. Yang, K. Xia, T. Wang, J. Niu, Y. Song, Z. Xiong, K. Zheng, S. Wei, W. Lu, Growth, in vitro biodegradation and cytocompatibility properties of nano-hydroxyapatite coatings on biodegradable magnesium alloys. J. Alloys Compd. 672, 366–373 (2016). https://doi.org/10.1016/J.JALLCOM.2016.02.15610.1016/J.JALLCOM.2016.02.156 ↗
54. S. Jafari, R.K. Singh Raman, In-vitro biodegradation and corrosion-assisted cracking of a coated magnesium alloy in modified-simulated body fluid. Mater. Sci. Eng. C 78, 278–287 (2017). https://doi.org/10.1016/J.MSEC.2017.04.07910.1016/J.MSEC.2017.04.079 ↗
55. J. Wang, F. Witte, T. Xi, Y. Zheng, K. Yang, Y. Yang, D. Zhao, J. Meng, Y. Li, W. Li, K. Chan, L. Qin, Recommendation for modifying current cytotoxicity testing standards for biodegradable magnesium-based materials. Acta Biomater. 21, 237–249 (2015). https://doi.org/10.1016/J.ACTBIO.2015.04.01110.1016/J.ACTBIO.2015.04.011 ↗
56. A.S. Hamdy Makhlouf, intelligent stannate-based coatings of self-healing functionality for magnesium alloys. Intell. Coatings Corros. Control (2015). https://doi.org/10.1016/B978-0-12-411467-8.00015-510.1016/B978-0-12-411467-8.00015-5 ↗
57. W. Aperador, A. Delgado, F. Franco, Improved resistance to intergranular corrosion in the AZ31B magnesium alloy by friction stir welding, 2013.10.1016/S1452-3981(23)12994-4 ↗
58. S. Raynaud, E. Champ Ion, D. Bernache-Assolant, D. Tet, Dynamic fatigue and degradation in solution of hydroxyapatite ceramics, 1998.
59. M.E. Iskandar, A. Aslani, H. Liu, The effects of nanostructured hydroxyapatite coating on the biodegradation and cytocompatibility of magnesium implants. J. Biomed. Mater. Res. Part A 101, 2340–2354 (2013). https://doi.org/10.1002/jbm.a.3453010.1002/jbm.a.34530 ↗
60. V. Grigoriou, I.M. Shapiro, E.A. Cavalcanti-Adam, R.J. Composto, P. Ducheyne, C.S. Adams, Apoptosis and survival of osteoblast-like cells are regulated by surface attachment. J. Biol. Chem. 280, 1733–1739 (2005). https://doi.org/10.1074/jbc.M40255020010.1074/jbc.M402550200 ↗
61. D. Yamashita, M. Machigashira, M. Miyamoto, H. Takeuchi, K. Noguchi, Y. Izumi, S. Ban, Effect of surface roughness on initial responses of osteoblast-like cells on two types of zirconia. Dent. Mater. J. 28, 461–470 (2009). https://doi.org/10.4012/dmj.28.46110.4012/dmj.28.461 ↗
62. P.M. Brett, J. Harle, V. Salih, R. Mihoc, I. Olsen, F.H. Jones, M. Tonetti, Roughness response genes in osteoblasts. Bone 35, 124–133 (2004). https://doi.org/10.1016/j.bone.2004.03.00910.1016/j.bone.2004.03.009 ↗
63. H. Liu, Z.S. Dunn, A. Tsanhani, Q. Tian, A. Rodriguez, L. Rivera-Castaneda, A. Aslani, J. Lin, Nano-to-submicron hydroxyapatite coatings for magnesium-based bioresorbable implants—Deposition, characterization, degradation, mechanical properties, and cytocompatibility. Sci. Rep. 9, 1–27 (2019). https://doi.org/10.1038/s41598-018-37123-310.1038/s41598-018-37123-3 ↗
64. Y. Xin, K. Huo, T. Hu, G. Tang, P.K. Chu, Corrosion products on biomedical magnesium alloy soaked in simulated body fluids. J. Mater. Res. 2009(24), 2711–2719 (2009). https://doi.org/10.1557/JMR.2009.032310.1557/JMR.2009.0323 ↗
65. T. Hobson, Exploring surface texture, 7th edition, 2011.