Recommended Parameters for the Takeda Degrading Stiffness Hysteresis for RC Circular Bridge Columns
Source abstract
Abstract
First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Seismic Performance and Analysis · Structural Engineering and Vibration Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Caltrans, “Seismic Design Criteria 2.0,” California Department of Transportation, Sacramento, CA, 2019.
2. AASHTO, “AASHTO Guide Specifications for LRFD Seismic Bridge Design,” second edition, American Association of State Highway and Transportation Officials, Washington, DC, 2011.
3. Otani, S., “Hysteresis Models of Reinforced Concrete for Earthquake Response Analysis,” Journal of Faculty of Engineering, V. 36, 1981.
4. Ibarra, L. F.; Medina, R. A.; and Krawinkler, H., “Hysteretic Models that Incorporate 13 Strength and Stiffness Deterioration,” Earthquake Engineering and Structural Dynamics, V. 34, 2005, pp. 1489-1511.10.1002/eqe.495 ↗
5. Medina, R. A., and Krawinkler, H., “Seismic Demands for Nondeteriorating Frame Structures and Their Dependence on Ground Motions,” Report No. 144, Blume Earthquake Engineering Center, Standford University, Stanford, CA, 2003, 373 pp.
6. Takayanagi, T., and Schnobrich, W. C., “Non-Linear Analysis of Coupled Wall Systems,” Earthquake Engineering & Structural Dynamics, V. 7, No. 1, 1979, pp. 1-20. doi: 10.1002/eqe.429007010210.1002/eqe.4290070102 ↗
7. Takeda, T.; Sozen, M. A.; and Nielsen, N. N., “Reinforced Concrete Response to Simulated Earthquakes,” Journal of the Structural Division, ASCE, V. 96, No. 12, 1970. doi: 10.1061/JSDEAG.000276510.1061/JSDEAG.0002765 ↗
8. Saatcioglu, M. and Ozcebe, G., “Response of Reinforced Concrete Columns to Simulated Seismic Loading,” ACI Structural Journal, V. 86, No. 1, Jan.-Feb. 1989, pp. 3-12.10.14359/2607 ↗
9. Ceresa, P., and Negrisoli, G., “Hysteretic Models Considering Axial-Shear-Flexure Interaction,” IOP Conference Series: Materials Science and Engineering, V. 245, Institute of Physics Publishing, 2017.10.1088/1757-899X/245/4/042046 ↗
10. Otani, S., and Sozen, M. A., “Behavior of Multistory Reinforced Concrete Frames during Earthquakes,” Structural Research Series No. 392, University of Illinois at Urbana-Champaign, Urbana, IL, 1972, 576 pp.
11. Carr, A. J., “RUAUMOKO-3D - A Program for Inelastic Time-History Analysis,” Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand, 2004.
12. Emori, K., and Schnobrich, W. C., “Analysis of Reinforced Concrete Frame-Wall Structures for Strong Motion Earthquakes,” Structural Research Series No. 457, University of Illinois at Urbana-Champaign, Urbana, IL, 1978, 224 pp.
13. Allahabadi, R., and Powell, G. H., “DRAIN·2DX User Guide,” Report No. UCB/EERC-88/06, Earthquake Engineering Research Center, University of California, Berkeley, Berkeley, CA, 1988.
14. Priestley, M. J. N.; Calvi, G. M.; and Kowalsky, M. J., Displacement-Based Seismic Design of Structures, IUSS Press, Pavia, Italy, 2007, 721 pp.
15. Lehman, D. E., and Moehle, J. P., “Seismic Performance of Well-Confined Concrete Bridge Columns,” PEER Report 1998/01, Pacific Earthquake Engineering Research Center, Berkeley, CA, 2000, 316 pp.
16. Hachem, M. M.; Mahin, S. A.; and Moehle, J. P., “Performance of Circular Reinforced Concrete Bridge Columns under Bidirectional Earthquake Loading,” PEER Report 2003/6, Pacific Earthquake Engineering Research Center, Berkeley, CA, 2003, 452 pp.
17. Petrini, L.; Maggi, C.; Priestley, M. J. N.; and Calvi, G. M., “Experimental Verification of Viscous Damping Modeling for Inelastic Time History Analyzes,” Journal of Earthquake Engineering, V. 12, 2008, pp. 125-145. doi: 10.1080/1363246080192582210.1080/13632460801925822 ↗
18. Johnson, N.; Saiidi, M. S.; and Sanders, D., “Nonlinear Earthquake Response Modeling of A Large-Scale Two-Span Concrete Bridge,” Journal of Bridge Engineering, ASCE, V. 14, No. 6, 2009, pp. 460-471. doi: 10.1061/(ASCE)BE.1943-5592.000000910.1061/(ASCE)BE.1943-5592.0000009 ↗
19. Moyer, M. J., and Kowalsky, M. J., “Influence of Tension Strain on Buckling of 24 Reinforcement in Concrete Columns,” ACI Structural Journal, V. 100, No. 1, Jan.-Feb. 2003, pp. 75-85.10.14359/12441 ↗
20. Goodnight, J. C., “The Effects of Load History and Design Variables on Performance Limit States of Circular Bridge Columns,” PhD dissertation, North Carolina State University, Raleigh, NC, 2014.
21. Barcley, L., “Seismic Performance of A706-80 Reinforced Concrete Columns and Critical Bending Strain of Longitudinal Reinforcement,” master’s thesis, North Carolina State University, Raleigh, NC, 2018.
22. Manhard, R., Impact of Grade 80 Reinforcing Steel Production Process on the Seismic 6 Behavior of Bridge Columns,” master’s thesis, North Carolina State University, Raleigh, NC, 2019.
23. Zhao, J., and Sritharan, S., “Modeling of Strain Penetration Effects in Fiber-Based Analysis of Reinforced Concrete Structures,” ACI Structural Journal, V. 104, No. 2, Mar.-Apr. 2007, pp. 133-141.10.14359/18525 ↗
24. Montejo, L. A., and Kowalsky, M. J., “CUMBIA Set of Codes for the Analysis of Reinforced Concrete Members,” Alaska Department of Transportation and Public Facilities, Juneau, AK, 2007.
25. Jacobsen, L. S., “Steady Forced Vibration as Influenced by Damping,” Transactions of the American Society of Mechanical Engineers, V. 52, No. 15, 1930, pp. 169-181.10.1115/1.4057368 ↗
26. Montejo, L. A.; Kowalsky, M. J.; and Hassan, T., “Seismic Behavior of Shear-Dominated Reinforced Concrete Columns at Low Temperatures,” ACI Structural Journal, V. 106, No. 4, July-Aug. 2009, pp. 445-454.10.14359/56610 ↗
27. Grant, D. N.; Blandon, C. A.; and Priestley, M. J. N., “Modeling Inelastic Response in Direct Displacement-Based Design,” Report No. Rose 2005/03, European School for Advanced Studies in Reduction of Seismic Risk, Pavia, Italy, 2005.
28. Mahan, M., personal correspondence, 2019.
29. Martinez, D. R., “Impact of Viscous Damping Model Assumptions on the Nonlinear Response of Bridge Structures,” PhD thesis, Dept. of Civil, Construction, and Environmental Engineering, North Carolina State University, Raleigh, NC, 2021.
30. Sakai, J., and Unjoh, S., “Shake Table Experiment on Circular Reinforced Concrete Bridge Column under Multidirectional Seismic Excitation,” Structural Engineering Research Frontiers, 2007. doi: 10.1061/40944(249)3710.1061/40944(249)37 ↗
31. Schoettler, M. J.; Restrepo, J. I.; Guerrini, G.; Duck, D. E.; and Carrea, F., “A Full-Scale, Single-Column Bridge Bent Tested by Shake-Table Excitation,” PEER Report 2015/02, Pacific Earthquake Engineering Research Center, Berkeley, CA, 2015, 153 pp.
32. Martinez, D., and Kowalsky, M., “Comparison of Seismic Demands on RC Bridge Columns Using the AASHTO Guide Specification, DDBA, and Nonlinear Analysis for Shallow Crustal and Subduction Tectonic Regimes,” Journal of Bridge Engineering, ASCE, V. 27, No. 6, 2022. doi: 10.1061/(ASCE)BE.1943-5592.000186810.1061/(ASCE)BE.1943-5592.0001868 ↗