Bond Differences at Two Ends of Steel Fiber-Reinforced Concrete Columns

1. Weng, C. C., and Yen, S. I., “Comparisons of Concrete-Encased Composite Column Strength Provisions of ACI Code and AISC Specification,” Engineering Structures, V. 24, No. 1, 2002, pp. 59-72. doi: 10.1016/S0141-0296(01)00067-010.1016/S0141-0296(01)00067-0 ↗

2. Chen, C. C., and Lin, N. J., “Analytical Model for Predicting Axial Capacity and Behavior of Concrete Encased Steel Composite Stub Columns,” Journal of Constructional Steel Research, V. 62, No. 5, 2006, pp. 424-433. doi: 10.1016/j.jcsr.2005.04.02110.1016/j.jcsr.2005.04.021 ↗

3. Ricles, J. M., and Paboojian, S. D., “Seismic Performance of Steel-Encased Composite Columns,” Journal of Structural Engineering, ASCE, V. 120, No. 8, 1994, pp. 2474-2494. doi: 10.1061/(ASCE)0733-9445(1994)120:8(2474)10.1061/(ASCE)0733-9445(1994)120:8(2474) ↗

4. Hsu, H. L.; Hsieh, J. C.; and Juang, J. L., “Seismic Performance of Steel-Encased Composite Members with Strengthening Cross-Inclined Bars,” Journal of Constructional Steel Research, V. 60, No. 11, 2004, pp. 1663-1679. doi: 10.1016/j.jcsr.2004.04.00210.1016/j.jcsr.2004.04.002 ↗

5. Chen, C. H.; Wang, C. K.; and Sun, H. Z., “Experimental Study on Seismic Behavior of Full Encased Steel-Concrete Composite Columns,” Journal of Structural Engineering, ASCE, V. 140, No. 6, 2014, p. 04014024 doi: 10.1061/(ASCE)ST.1943-541X.000095110.1061/(ASCE)ST.1943-541X.0000951 ↗

6. Saw, H. S., and Liew, J. Y. R., “Assessment of Current Methods for the Design of Composite Columns in Buildings,” Journal of Constructional Steel Research, V. 53, No. 2, 2000, pp. 121-147. doi: 10.1016/S0143-974X(99)00062-010.1016/S0143-974X(99)00062-0 ↗

7. Xue, J. Y.; Zhou, C. F.; Liu, Z. Q.; and Qi, L. J., “Seismic Response of Steel Reinforced Concrete Spatial Frame with Irregular Section Columns under Earthquake Excitation,” Earthquakes and Structures, V. 14, No. 4, 2018, pp. 337-347.

8. Azizinamini, A., and Ghosh, S. K., “Steel Reinforced Concrete Structures in 1995 Hyogoken-Nanbu Earthquake,” Journal of Structural Engineering, ASCE, V. 123, No. 8, 1997, pp. 986-992. doi: 10.1061/(ASCE)0733-9445(1997)123:8(986)10.1061/(ASCE)0733-9445(1997)123:8(986) ↗

9. Ye, M.; Pi, Y. P.; and Ren, M., “Experimental and Analytical Investigation on RC Columns with Distributed-Steel Bar,” Structural Engineering and Mechanics, V. 47, No. 6, 2013, pp. 741-756. doi: 10.12989/sem.2013.47.6.74110.12989/sem.2013.47.6.741 ↗

10. Seo, J., and Varma, A. H., “Experimental Behavior and Design of Steel Plate Composite-to-Reinforced Concrete Lap Splice Connections,” Journal of Structural Engineering, V. 143, No. 5, 2017, p. 04017011 doi: 10.1061/(ASCE)ST.1943-541X.000171110.1061/(ASCE)ST.1943-541X.0001711 ↗

11. Nzabonimpa, J. D., and Hong, W. K., “Novel Precast Erection Method of Interlocking Mechanical Joints Using Couplers,” Journal of Construction Engineering and Management, ASCE, V. 144, No. 6, 2018, p. 04018036 doi: 10.1061/(ASCE)CO.1943-7862.000148210.1061/(ASCE)CO.1943-7862.0001482 ↗

12. Yang, Y.; Yu, Y. L.; Guo, Y. X.; Roeder, C. W.; Xue, Y.; and Shao, Y., “Experimental Study on Shear Performance of Partially Precast Castellated Steel Reinforced Concrete (CPSRC) Beams,” Steel and Composite Structures, V. 21, No. 2, 2016, pp. 289-302. doi: 10.12989/scs.2016.21.2.28910.12989/scs.2016.21.2.289 ↗

13. Su, Q. T.; Dai, C. Y.; and Xu, C., “Full-Scale Experimental Study on the Negative Flexural Behavior of Orthotropic Steel-Concrete Composite Bridge Deck,” Journal of Bridge Engineering, ASCE, V. 23, No. 12, 2018, p. 04018097 doi: 10.1061/(ASCE)BE.1943-5592.000132010.1061/(ASCE)BE.1943-5592.0001320 ↗

14. Sharma, S.; Arora, V. V.; Kumar, S.; Daniel, Y. N.; and Sharma, A., “Durability Study of High-Strength Steel Fiber-Reinforced Concrete,” ACI Structural Journal, V. 115, No. 2, Mar. 2018, pp. 219-225.10.14359/51701122 ↗

15. Paultre, P.; Eid, R.; Langlois, Y.; and Lévesque, Y., “Behavior of Steel Fiber-Reinforced High-Strength Concrete Columns under Uniaxial Compression,” Journal of Structural Engineering, ASCE, V. 136, No. 10, 2010, pp. 1225-1235. doi: 10.1061/(ASCE)ST.1943-541X.000021110.1061/(ASCE)ST.1943-541X.0000211 ↗

16. Song, P. S., and Hwang, S., “Mechanical Properties of High-Strength Steel Fiber-Reinforced Concrete,” Construction and Building Materials, V. 18, No. 9, 2004, pp. 669-673. doi: 10.1016/j.conbuildmat.2004.04.02710.1016/j.conbuildmat.2004.04.027 ↗

17. Amin, A., and Gilbert, R. I., “Steel Fiber-Reinforced Concrete Beams—Part II: Strength, Ductility, and Design,” ACI Structural Journal, V. 116, No. 2, Mar. 2019, pp. 113-123. doi: 10.14359/5171328910.14359/51713289 ↗

18. Chanthabouala, K.; Teng, S.; Chandra, J.; Tan, K.-H.; and Ostertag, C. P., “Punching Tests of Double-Hooked-End Fiber-Reinforced Concrete Slabs,” ACI Structural Journal, V. 115, No. 6, Nov. 2018, pp. 1777-1789. doi: 10.14359/5170689110.14359/51706891 ↗

19. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, MI, 2014, 520 pp.

20. Dinh, H. H.; Parra-Montesinos, G. J.; and Wight, J. K., “Shear Behavior of Steel Fiber-Reinforced Concrete Beams without Stirrup Reinforcement,” ACI Structural Journal, V. 107, No. 5, Sept.-Oct. 2010, pp. 597-606.10.14359/51663913 ↗

21. Ding, Y. N.; You, Z. G.; and Jalali, S., “The Composite Effect of Steel Fibres and Stirrups on the Shear Behaviour of Beams Using Self-Consolidating Concrete,” Engineering Structures, V. 33, No. 1, 2011, pp. 107-117. doi: 10.1016/j.engstruct.2010.09.02310.1016/j.engstruct.2010.09.023 ↗

22. Boita, I. E.; Dan, D.; and Stoian, V., “Seismic Behaviour of Composite Steel Fibre Reinforced Concrete Shear Walls,” IOP Conference Series. Materials Science and Engineering, V. 245, 2017, p. 022006 doi: 10.1088/1757-899X/245/2/02200610.1088/1757-899X/245/2/022006 ↗

23. Yoo, D. Y.; Yuan, T. F.; Yang, J. M.; and Yoon, Y. S., “Feasibility of Replacing Minimum Shear Reinforcement with Steel Fibers for Sustainable High-Strength Concrete Beams,” Engineering Structures, V. 147, 2017, pp. 207-222. doi: 10.1016/j.engstruct.2017.06.00410.1016/j.engstruct.2017.06.004 ↗

24. Valipour, H.; Vessali, N.; and Foster, S., “Fibre-Reinforced Concrete Beam Assemblages Subject to Column Loss,” Magazine of Concrete Research, V. 68, No. 6, 2016, pp. 305-317. doi: 10.1680/macr.15.0009510.1680/macr.15.00095 ↗

25. Ghazizadeh, S., and Cruz-Noguez, C. A., “Damage-Resistant Reinforced Concrete Low-Rise Walls with Hybrid GFRP-Steel Reinforcement and Steel Fibers,” Journal of Composites for Construction, ASCE, V. 22, No. 2, 2018, p. 04018002 doi: 10.1061/(ASCE)CC.1943-5614.000083410.1061/(ASCE)CC.1943-5614.0000834 ↗

26. Hung, C. C., and Hu, F. Y., “Behavior of High-Strength Concrete Slender Columns Strengthened with Steel Fibers under Concentric Axial Loading,” Construction and Building Materials, V. 175, 2018, pp. 422-433. doi: 10.1016/j.conbuildmat.2018.04.20110.1016/j.conbuildmat.2018.04.201 ↗

27. Muttoni, A., and Fernández Ruiz, M., “Shear Strength of Members without Transverse Reinforcement as Function of Critical Shear Crack Width,” ACI Structural Journal, V. 105, No. 2, Mar.-Apr. 2008, pp. 163-172.10.14359/19731 ↗

28. Qian, C. X., and Indubhushan, P., “Properties of High-Strength Steel Fiber-Reinforced Concrete Beams in Bending,” Cement and Concrete Composites, V. 21, No. 1, 1999, pp. 73-81. doi: 10.1016/S0958-9465(98)00040-710.1016/S0958-9465(98)00040-7 ↗

29. Chen, Z. P.; Xu, J. J.; Liang, Y.; and Su, Y. S., “Bond Behaviors of Shape Steel Embedded in Recycled Aggregate Concrete and Recycled Aggregate Concrete Filled in Steel Tubes,” Steel and Composite Structures, V. 17, No. 6, 2014, pp. 929-949. doi: 10.12989/scs.2014.17.6.92910.12989/scs.2014.17.6.929 ↗

30. Roeder, C. W.; Chmielowski, R.; and Brown, C. B., “Shear Connector Requirements for Embedded Steel Sections,” Journal of Structural Engineering, ASCE, V. 125, No. 2, 1999, pp. 142-151. doi: 10.1061/(ASCE)0733-9445(1999)125:2(142)10.1061/(ASCE)0733-9445(1999)125:2(142) ↗

31. Wang, W. H.; Han, L. H.; Tan, Q. H.; and Tao, Z., “Tests on the Steel–Concrete Bond Strength in Steel Reinforced Concrete (SRC) Columns after Fire Exposure,” Fire Technology, V. 53, No. 2, 2017, pp. 917-945. doi: 10.1007/s10694-016-0610-610.1007/s10694-016-0610-6 ↗

32. Chen, L. H.; Dai, J. X.; Jin, Q. L.; Chen, L. F.; and Liu, X. L., “Refining Bond–Slip Constitutive Relationship between Checkered Steel Tube and Concrete,” Construction and Building Materials, V. 79, 2015, pp. 153-164. doi: 10.1016/j.conbuildmat.2014.12.05810.1016/j.conbuildmat.2014.12.058 ↗

33. Feng, R.; Chen, Y.; He, K.; Wei, J. G.; Chen, B. C.; and Zhang, X. T., “Push-Out Tests of Concrete-Filled Stainless Steel SHS Tubes,” Journal of Constructional Steel Research, V. 145, 2018, pp. 58-69. doi: 10.1016/j.jcsr.2018.02.01610.1016/j.jcsr.2018.02.016 ↗

34. Zhao, Y. X.; Lin, H. W.; Wu, K.; and Jin, W. L., “Bond Behavior of Normal/Recycled Concrete and Corroded Steel Bars,” Construction and Building Materials, V. 48, No. 11, 2013, pp. 348-359. doi: 10.1016/j.conbuildmat.2013.06.09110.1016/j.conbuildmat.2013.06.091 ↗

35. Wang, B.; Bai, G. L.; Dai, H. J.; and Wu, S. H., “Experimental and Mechanical Analysis of Bond-Slip Performance between Recycled Concrete and Rebar,” Engineering Mechanics, V. 30, No. 10, 2013, pp. 54-64. doi: 10.3901/JME.2016.10.05410.3901/JME.2016.10.054 ↗

36. Ding, Y.; Wu, M.; Xu, L. H.; Zhu, H. T.; and Li, Z. X., “Seismic Damage Evolution of Steel–Concrete Hybrid Space-Frame Structures,” Engineering Structures, V. 119, 2016, pp. 1-12. doi: 10.1016/j.engstruct.2016.04.00710.1016/j.engstruct.2016.04.007 ↗

37. Maeda, M., and Kang, D. E., “Post-Earthquake Damage Evaluation of Reinforced Concrete Buildings,” Journal of Advanced Concrete Technology, V. 7, No. 3, 2009, pp. 327-335. doi: 10.3151/jact.7.32710.3151/jact.7.327 ↗