Cyclic indentation of polymers: Instantaneous elastic modulus from reloading, energy analysis, and cyclic creep

An analysis of indentation cyclic behavior of polymers is carried out with the aim to tackle time-dependent behavior of polymer at several time scales by one test. The method consists in cycling the load between a positive close-to-zero value and a maximum peak value (10 mN in this study) for long time with constant loading rate. The short time scale is characterized through the instantaneous elastic modulus determined from reloading curves at each cycle. The advantages of determination of instantaneous elastic modulus from reloading instead of commonly used unloading curves are discussed. The energy dissipation describes viscoelasticity and plasticity at the time scale of one cycle. The evolution of both parameters with cycles along with the cyclic creep describes the long-time viscoelasticity. The cyclic indentation behavior of poly(methyl methacrylate), PR520 epoxy, and high-density polyethylene (HDPE) polymers is analyzed, and a comparison with the macroscopic cyclic behavior of HDPE is presented.