Experimental Study on Fracture Behavior of Dam Concrete under Cyclic Loading

1. Dong, Y.; Xiao, K.; and Yang, H., “Experimental Studies on Properties of Fully-Graded Arch Dam Concrete with Natural Aggregate,” Chinese Journal of Concrete, V. 2013, 2013, pp. 140-143. (in Chinese)

2. Zheng, D.; Han, W.; and Zhang, Y., “Research on Strength Ratio of Full Grade and Wet-Sieving Hydraulic Concrete,” Chinese Journal of Water Resources and Architectural Engineering, V. 9, 2011, pp. 10-14. (in Chinese)

3. Brühwiler, E., and Wittmann, F. H., “Failure of Dam Concrete Subjected to Seismic Loading Conditions,” Engineering Fracture Mechanics, V. 35, No. 1-3, 1990, pp. 565-571. doi: 10.1016/0013-7944(90)90231-510.1016/0013-7944(90)90231-5 ↗

4. Deng, Z.; Li, Q.; and Fu, H., “Comparison between Mechanical Properties of Dam and Sieved Concretes,” Journal of Materials in Civil Engineering, ASCE, V. 20, No. 4, 2008, pp. 321-326. doi: 10.1061/(ASCE)0899-1561(2008)20:4(321)10.1061/(ASCE)0899-1561(2008)20:4(321) ↗

5. Khaloo, A. R.; Mohamadi Shooreh, M. R.; and Askari, S. M., “Size Influence of Specimens and Maximum Aggregate on Dam Concrete: Compressive Strength,” Journal of Materials in Civil Engineering, ASCE, V. 21, No. 8, 2009, pp. 349-355. doi: 10.1061/(ASCE)0899-1561(2009)21:8(349)10.1061/(ASCE)0899-1561(2009)21:8(349) ↗

6. Saouma, V. E.; Broz, J. J.; Brühwiler, E.; and Boggs, H. L., “Effect of Aggregate and Specimen Size on Fracture Properties of Dam Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 3, No. 3, 1991, pp. 204-218. doi: 10.1061/(ASCE)0899-1561(1991)3:3(204)10.1061/(ASCE)0899-1561(1991)3:3(204) ↗

7. Shi, D., and Chen, X., “Flexural Tensile Fracture Behavior of Pervious Concrete under Static Preloading,” Journal of Materials in Civil Engineering, ASCE, V. 30, No. 11, 2018, p. 06018015. doi: 10.1061/(ASCE)MT.1943-5533.000247710.1061/(ASCE)MT.1943-5533.0002477 ↗

8. Chen, X.; Shi, D.; Shen, N.; Li, S.; and Liu, S., “Experimental Study and Analytical Modeling on Fatigue Properties of Pervious Concrete Made with Natural and Recycled Aggregates,” International Journal of Concrete Structures and Materials, V. 13, No. 1, 2019, p. 10 doi: 10.1186/s40069-018-0305-010.1186/s40069-018-0305-0 ↗

9. Chen, X.; Liu, Z.; Guo, S.; Huang, Y.; and Xu, W., “Experimental Study on Fatigue Properties of Normal and Rubberized Self-Compacting Concrete under Bending,” Construction and Building Materials, V. 205, 2019, pp. 10-20. doi: 10.1016/j.conbuildmat.2019.01.20710.1016/j.conbuildmat.2019.01.207 ↗

10. Tang, T.; Duan, S.; and Duan, Y., “Analysis on Full-Graded and Wetscreened Tests for Jinping I Arch Dam Concrete,” Chinese Journal of Yellow River, V. 34, 2012, pp. 111-112. (in Chinese)

11. Xie, J.; Tang, Y.; and Chen, G., “Study on the Properties of Concrete for Arch Dam of Xiaowan Hydropower Station,” Chinese Journal of Water Power, V. 35, 2009, pp. 38-41. (in Chinese)

12. Li, Q.; Deng, Z.; and Fu, H., “Effect of Aggregate Type on Mechanical Behavior of Dam Concrete,” ACI Materials Journal, V. 101, No. 6, Nov.-Dec. 2004, pp. 483-492.10.14359/13487 ↗

13. Song, Y.; Xu, X.; and Liu, H., “Comparison of Mechanical Properties of Fully-Graded Concrete and Sieved Concrete,” Journal of Hydraulic Engineering, V. 43, No. 1, 2012, pp. 69-75. (in Chinese)

14. Vilardell, J.; Aguado, A.; Agullo, L.; and Gettu, R., “Estimation of the Modulus of Elasticity for Dam Concrete,” Cement and Concrete Research, V. 28, No. 1, 1998, pp. 93-101. doi: 10.1016/S0008-8846(97)00214-710.1016/S0008-8846(97)00214-7 ↗

15. Guan, J.; Li, Q.; Wu, Z.; Zhao, S.; Dong, W.; and Zhou, S., “Fracture Parameters of Site-Cast Dam and Sieved Concrete,” Magazine of Concrete Research, V. 68, No. 1, 2016, pp. 43-54. doi: 10.1680/macr.15.0000810.1680/macr.15.00008 ↗

16. Serra, C.; Batista, A. L.; and Monteiro Azevedo, N., “Effect of Wet Screening in the Elastic Properties of Dam Concrete: Experimental In Situ Test Results and Fit to Composite Models,” Journal of Materials in Civil Engineering, ASCE, V. 28, No. 12, 2016, p. 04016146 doi: 10.1061/(ASCE)MT.1943-5533.000167210.1061/(ASCE)MT.1943-5533.0001672 ↗

17. Serra, C.; Batista, A. L.; Azevedo, N. M.; and Custódio, J., “Prediction of Dam Concrete Compressive and Splitting Tensile Strength Based on Wet-Screened Concrete Test Results,” Journal of Materials in Civil Engineering, ASCE, V. 29, No. 10, 2017, p. 04017188. doi: 10.1061/(ASCE)MT.1943-5533.000201210.1061/(ASCE)MT.1943-5533.0002012 ↗

18. Huang, Y.; Xiao, L.; Gao, J.; and Liu, Y., “Tensile Creep and Unloading Creep Recovery Testing of Dam Concrete with Fly Ash,” Journal of Materials in Civil Engineering, ASCE, V. 31, No. 5, 2019, p. 05019001 doi: 10.1061/(ASCE)MT.1943-5533.000268210.1061/(ASCE)MT.1943-5533.0002682 ↗

19. Talboys, L. N.; Lubell, A. S.; and Bindiganavile, V. S., “Determining Specimen Size Influences on FRC Response Using the Digital Image Correlation Technique,” High Performance Fiber Reinforced Cement Composites, V. 2, 2012, pp. 35-42. doi: 10.1007/978-94-007-2436-5_510.1007/978-94-007-2436-5_5 ↗

20. Shih, M. H., and Sung, W. P., “Application of Digital Image Correlation Method for Analysing Crack Variation of Reinforced Concrete Beams,” Sadhana, V. 38, No. 4, 2013, pp. 723-741. doi: 10.1007/s12046-013-0141-510.1007/s12046-013-0141-5 ↗

21. Xie, Z. L.; Zhou, H. F.; Lu, L. J.; and Chen, Z. A., “An Investigation into Fracture Behavior of Geopolymer Concrete with Digital Image Correlation Technique,” Construction and Building Materials, V. 155, 2017, pp. 371-380. doi: 10.1016/j.conbuildmat.2017.08.04110.1016/j.conbuildmat.2017.08.041 ↗

22. Shahidan, S.; Pulin, R.; Bunnori, N. M.; and Holford, K. M., “Damage Classification in Reinforced Concrete Beam by Acoustic Emission Signal Analysis,” Construction and Building Materials, V. 45, 2013, pp. 78-86. doi: 10.1016/j.conbuildmat.2013.03.09510.1016/j.conbuildmat.2013.03.095 ↗

23. Nguyen-Tat, T.; Ranaivomanana, N.; and Balayssac, J. P., “Characterization of Damage in Concrete Beams under Bending with Acoustic Emission Technique (AET),” Construction and Building Materials, V. 187, 2018, pp. 487-500. doi: 10.1016/j.conbuildmat.2018.07.21710.1016/j.conbuildmat.2018.07.217 ↗

24. Li, B.; Chi, Y.; Xu, L.; Li, C.; and Shi, Y., “Cyclic Tensile Behavior of SFRC: Experimental Research and Analytical Model,” Construction and Building Materials, V. 190, 2018, pp. 1236-1250. doi: 10.1016/j.conbuildmat.2018.09.14010.1016/j.conbuildmat.2018.09.140 ↗

25. Matthews, J. R., ed., Acoustic Emission, V. 2, CRC Press, Boca Raton, FL, 1983.

26. Gutenberg, B., and Richter, C. F., “Frequency of Earthquakes in California,” Bulletin of the Seismological Society of America, V. 34, No. 4, 1944, pp. 185-188.10.1785/BSSA0340040185 ↗

27. Guo, Y.; Chen, X.; Yang, H.; Hu, L.; Zhang, J.; and Fan, X., “Experimental Study on Direct Tension Behavior of Concrete through Combined Digital Image Correlation and Acoustic Emission Techniques,” Structural Concrete, V. 20, No. 6, 2019, pp. 2042-2055. doi: 10.1002/suco.20180035410.1002/suco.201800354 ↗

28. Colombo, I. S.; Main, I. G.; and Forde, M. C., “Assessing Damage of Reinforced Concrete Beam Using “b-Value” Analysis of Acoustic Emission Signals,” Journal of Materials in Civil Engineering, ASCE, V. 15, No. 3, 2003, pp. 280-286. doi: 10.1061/(ASCE)0899-1561(2003)15:3(280)10.1061/(ASCE)0899-1561(2003)15:3(280) ↗

29. Rao, M. V. M. S., and Lakshmi, K. J. P., “Analysis of b-Value and Improved b-Value of Acoustic Emissions Accompanying Rock Fracture,” Current Science, V. 89, No. 10, 2005, pp. 1577-1582.

30. Han, Q.; Yang, G.; Xu, J.; Fu, Z.; Lacidogna, G.; and Carpinteri, A., “Acoustic Emission Data Analyses Based on Crumb Rubber Concrete Beam Bending Tests,” Engineering Fracture Mechanics, V. 210, 2019, pp. 189-202. doi: 10.1016/j.engfracmech.2018.05.01610.1016/j.engfracmech.2018.05.016 ↗

31. Li, D.; Cao, H.; and Ou, J. P., “Fracture Behavior and Damage Evaluation of Polyvinyl Alcohol Fiber Concrete Using Acoustic Emission Technique,” Materials & Design, V. 40, 2012, pp. 205-211. doi: 10.1016/j.matdes.2012.03.05110.1016/j.matdes.2012.03.051 ↗

32. Di Benedetti, M., and Nanni, A., “Acoustic Emission Intensity Analysis for In Situ Evaluation of Reinforced Concrete Slabs,” Journal of Materials in Civil Engineering, ASCE, V. 26, No. 1, 2014, pp. 6-13. doi: 10.1061/(ASCE)MT.1943-5533.000079410.1061/(ASCE)MT.1943-5533.0000794 ↗

33. Fowler, T. J.; Blessing, J. A.; Conlisk, P. J.; and Swanson, T. L., “The MONPAC System,” Journal of Acoustic Emission, V. 8, No. 3, 1989, pp. 1-8.

34. Schreier, H.; Orteu, J. J.; and Sutton, M. A., Image Correlation for Shape, Motion and Deformation Measurements, Springer-Verlag US, 2009.10.1007/978-0-387-78747-3 ↗

35. Kolanu, N. R.; Prakash, S. S.; and Ramji, M., “Experimental Study on Compressive Behavior of GFRP Stiffened Panels Using Digital Image Correlation,” Ocean Engineering, V. 114, 2016, pp. 290-302. doi: 10.1016/j.oceaneng.2016.01.03410.1016/j.oceaneng.2016.01.034 ↗

36. Srikar, G.; Anand, G.; and Prakash, S. S., “A Study on Residual Compression Behavior of Structural Fiber Reinforced Concrete Exposed to Moderate Temperature Using Digital Image Correlation,” International Journal of Concrete Structures and Materials, V. 10, No. 1, 2016, pp. 75-85. doi: 10.1007/s40069-016-0127-x10.1007/s40069-016-0127-x ↗

37. Chen, X.; Wu, S.; and Zhou, J., “Large-Beam Tests on Mechanical Behavior of Dam Concrete under Dynamic Loading,” Journal of Materials in Civil Engineering, ASCE, V. 27, No. 10, 2015, p. 06015001. doi: 10.1061/(ASCE)MT.1943-5533.000126310.1061/(ASCE)MT.1943-5533.0001263 ↗