Reliability Analysis of Carbon Fiber-Reinforced Polymer Shear-Strengthened Reinforced Concrete Beams Subjected to Deterioration

1. ACI Committee 440, 2017, “Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-17),” American Concrete Institute, Farmington Hills, MI, 114 pp.

2. Alsayed, S. H., and Siddiqui, N. A., 2013, “Reliability of Shear-Deficient RC Beams Strengthened with CFRP-Sheets,” Construction and Building Materials, V. 42, pp. 238-247. doi: 10.1016/j.conbuildmat.2013.01.02410.1016/j.conbuildmat.2013.01.024 ↗

3. Amidi, S., and Wang, J., 2016, “Subcritical Debonding of FRP-to-Concrete Bonded Interface under Synergistic Effect of Load, Moisture, and Temperature,” Mechanics of Materials, V. 92, pp. 80-93. doi: 10.1016/j.mechmat.2015.09.00110.1016/j.mechmat.2015.09.001 ↗

4. Atadero, R. A., and Karbhari, V. M., 2008, “Calibration of Resistance Factors for Reliability-Based Design of Externally-Bonded FRP Composites,” Composites. Part B, Engineering, V. 39, No. 4, pp. 665-679. doi: 10.1016/j.compositesb.2007.06.00410.1016/j.compositesb.2007.06.004 ↗

5. Baji, H.; Ronagh, H. R.; and Li, C. Q., 2016a, “Probabilistic Assessment of FRP-Confined Reinforced Concrete Columns,” Composite Structures, V. 153, pp. 851-865. doi: 10.1016/j.compstruct.2016.07.00310.1016/j.compstruct.2016.07.003 ↗

6. Baji, H.; Ronagh, H. R.; and Li, C. Q., 2016b, “Probabilistic Design Models for Ultimate Strength and Strain of FRP-Confined Concrete,” Journal of Composites for Construction, ASCE, V. 20, No. 6, p. 04016051 doi: 10.1061/(ASCE)CC.1943-5614.000070410.1061/(ASCE)CC.1943-5614.0000704 ↗

7. Baji, H.; Yang, W.; and Li, C. Q., 2017, “An Optimum Strengthening Strategy for Corrosion-Affected Reinforced Concrete Structures,” ACI Structural Journal, V. 114, No. 6, Nov.-Dec., pp. 1591-1602. doi: 10.14359/5170083410.14359/51700834 ↗

8. Belarbi, A.; Bae, S.; Ayoub, A.; Kuchma, D.; Mirmiran, A.; and Okeil, A., 2011, “Design of FRP Systems for Strengthening Concrete Girders in Shear,” NCHRP Report No. 678, Transportation Research Board, Washington, DC.

9. Bousselham, A., and Chaallal, O., 2013, “Experimental Investigations on the Influence of Size on the Performance of RC T-Beams Retrofitted in Shear with CFRP Fabrics,” Engineering Structures, V. 56, pp. 1070-1079. doi: 10.1016/j.engstruct.2013.06.02810.1016/j.engstruct.2013.06.028 ↗

10. Cao, S. Y.; Chen, J. F.; Teng, J. G.; Hao, Z.; and Chen, J., 2005, “Debonding in RC Beams Shear Strengthened with Complete FRP Sheets,” Journal of Composites for Construction, ASCE, V. 9, No. 5, pp. 417-428. doi: 10.1061/(ASCE)1090-0268(2005)9:5(417)10.1061/(ASCE)1090-0268(2005)9:5(417) ↗

11. Chen, J. F., and Teng, J. G., 2003a, “Shear Capacity of FRP-Strengthened RC Beams: FRP Debonding,” Construction and Building Materials, V. 17, No. 1, pp. 27-41. doi: 10.1016/S0950-0618(02)00091-010.1016/S0950-0618(02)00091-0 ↗

12. Chen, J. F., and Teng, J. G., 2003b, “Shear Capacity of Fiber-Reinforced Polymer-Strengthened Reinforced Concrete Beams: Fiber Reinforced Polymer Rupture,” Journal of Structural Engineering, ASCE, V. 129, No. 5, pp. 615-625. doi: 10.1061/(ASCE)0733-9445(2003)129:5(615)10.1061/(ASCE)0733-9445(2003)129:5(615) ↗

13. Chu, W.; Wu, L.; and Karbhari, V. M., 2004, “Durability Evaluation of Moderate Temperature Cured E-Glass/Vinylester Systems,” Composite Structures, V. 66, No. 1-4, pp. 367-376. doi: 10.1016/j.compstruct.2004.04.05810.1016/j.compstruct.2004.04.058 ↗

14. Cromwell, J. R.; Harries, K. A.; and Shahrooz, B. M., 2011, “Environmental Durability of Externally Bonded FRP Materials Intended for Repair of Concrete Structures,” Construction and Building Materials, V. 25, No. 5, pp. 2528-2539. doi: 10.1016/j.conbuildmat.2010.11.09610.1016/j.conbuildmat.2010.11.096 ↗

15. Dias, S. J., and Barros, J. A., 2008, “Shear Strengthening of T Cross Section Reinforced Concrete Beams by Near-Surface Mounted Technique,” Journal of Composites for Construction, ASCE, V. 12, No. 3, pp. 300-311. doi: 10.1061/(ASCE)1090-0268(2008)12:3(300)10.1061/(ASCE)1090-0268(2008)12:3(300) ↗

16. Dias, S. J. E., and Barros, J. A. O., 2011, “Shear Strengthening of RC T-Section Beams with Low Strength Concrete Using NSM CFRP Laminates,” Cement and Concrete Composites, V. 33, No. 2, pp. 334-345. doi: 10.1016/j.cemconcomp.2010.10.00210.1016/j.cemconcomp.2010.10.002 ↗

17. El Hassan, J.; Bressolette, P.; Chateauneuf, A.; and El Tawil, K., 2010, “Reliability-Based Assessment of the Effect of Climatic Conditions on the Corrosion of RC Structures Subject to Chloride Ingress,” Engineering Structures, V. 32, No. 10, pp. 3279-3287. doi: 10.1016/j.engstruct.2010.07.00110.1016/j.engstruct.2010.07.001 ↗

18. El Maaddawy, T.; Soudki, K.; and Topper, T., 2007, “Performance Evaluation of Carbon Fiber-Reinforced Polymer-Repaired Beams under Corrosive Environmental Conditions,” ACI Structural Journal, V. 104, No. 1, Jan.-Feb., pp. 3-11.10.14359/18427 ↗

19. Ellingwood, B. R., 2003, “Toward Load and Resistance Factor Design for Fiber-Reinforced Polymer Composite Structures,” Journal of Structural Engineering, ASCE, V. 129, No. 4, pp. 449-458. doi: 10.1061/(ASCE)0733-9445(2003)129:4(449)10.1061/(ASCE)0733-9445(2003)129:4(449) ↗

20. fib bulletin 14, 2001, “Externally Bonded FRP Reinforcement for RC Structures,” TG 9.3, International Federation for Structural Concrete, Lausanne, Switzerland.

21. Firouzi, A.; Taki, A.; and Mohammadzadeh, S., 2016, “Time Dependent Reliability Analysis of Concrete Transportation Infrastructure Shear Strengthened by CFRP Wraps,” Proceedings of the World Congress on Engineering and Computer Science; International Association of Engineers (IAENG), V. 2, San Francisco, CA.

22. Firouzi, A.; Taki, A.; and Mohammadzadeh, S., 2019, “Time-Dependent Reliability Analysis of RC Beams Shear and Flexural Strengthened with CFRP Subjected to Harsh Environmental Deteriorations,” Engineering Structures, V. 196, p. 109326 doi: 10.1016/j.engstruct.2019.10932610.1016/j.engstruct.2019.109326 ↗

23. Green, M. F.; Dent, A. J.; and Bisby, L. A., 2003, “Effect of Freeze-Thaw Cycling on the Behavior of Reinforced Concrete Beams Strengthened in Flexure with Fiber Reinforced Polymer Sheets,” Canadian Journal of Civil Engineering, V. 30, No. 6, pp. 1081-1088. doi: 10.1139/l03-05910.1139/l03-059 ↗

24. Iervolino, I., and Galasso, C., 2012, “Comparative Assessment of Load-Resistance Factor Design of FRP-Reinforced Cross Sections,” Construction and Building Materials, V. 34, pp. 151-161. doi: 10.1016/j.conbuildmat.2012.02.02110.1016/j.conbuildmat.2012.02.021 ↗

25. Karbhari, V. M., and Abanilla, M. A., 2007, “Design Factors, Reliability, and Durability Prediction of Wet Layup Carbon/Epoxy Used in External Strengthening,” Composites. Part B, Engineering, V. 38, No. 1, pp. 10-23. doi: 10.1016/j.compositesb.2006.06.00110.1016/j.compositesb.2006.06.001 ↗

26. Karbhari, V. M.; Chin, J.; Hunston, D.; Benmokrane, B.; Juska, T.; Morgan, R.; Lesko, J. J.; Sorathia, U.; and Reynaud, A. D., 2003, “Durability Gap Analysis for Fiber-Reinforced Polymer Composites in Civil Infrastructure,” Journal of Composites for Construction, ASCE, V. 7, No. 3, pp. 238-247. doi: 10.1061/(ASCE)1090-0268(2003)7:3(238)10.1061/(ASCE)1090-0268(2003)7:3(238) ↗

27. Khalifa, A.; Gold, W. J.; Nanni, A.; and Abdel Aziz, M. I., 1998, “Contribution of Externally Bonded FRP to Shear Capacity of RC Flexural Members,” Journal of Composites for Construction, ASCE, V. 2, No. 4, pp. 195-202. doi: 10.1061/(ASCE)1090-0268(1998)2:4(195)10.1061/(ASCE)1090-0268(1998)2:4(195) ↗

28. Khalifa, A., and Nanni, A., 2000, “Improving Shear Capacity of Existing RC T-Section Beams Using CFRP Composites,” Cement and Concrete Composites, V. 22, No. 3, pp. 165-174. doi: 10.1016/S0958-9465(99)00051-710.1016/S0958-9465(99)00051-7 ↗

29. Kim, Y. J.; Kang, J. Y.; Park, J. S.; and Jung, W. T., 2016, “Functional Performance of Bridge Girders Strengthened with Post-Tensioned Near-Surface-Mounted Carbon Fiber-Reinforced Polymer,” ACI Structural Journal, V. 113, No. 2, Mar.-Apr., pp. 239-250. doi: 10.14359/5168780110.14359/51687801 ↗

30. Lu, X. Z.; Chen, J. F.; Ye, L. P.; Teng, J. G.; and Rotter, J. M., 2009, “RC Beams Shear-Strengthened with FRP: Stress Distributions in the FRP Reinforcement,” Construction and Building Materials, V. 23, No. 4, pp. 1544-1554. doi: 10.1016/j.conbuildmat.2008.09.01910.1016/j.conbuildmat.2008.09.019 ↗

31. Mofidi, A., and Chaallal, O., 2011, “Shear Strengthening of RC Beams with Externally Bonded FRP Composites: Effect of Strip-Width-to-Strip-Spacing Ratio,” Journal of Composites for Construction, ASCE, V. 15, No. 5, pp. 732-742. doi: 10.1061/(ASCE)CC.1943-5614.000021910.1061/(ASCE)CC.1943-5614.0000219 ↗

32. Moshirabadi, S., and Soltani, M., 2019, “Implementation of Smeared Crack Approach in Rigid Block and Spring Modeling of Reinforced Concrete,” Engineering Structures, V. 201, p. 109779. doi: 10.1016/j.engstruct.2019.10977910.1016/j.engstruct.2019.109779 ↗

33. Nowak, A. S., and Collins, K. R., 2012, Reliability of Structures, CRC Press, London, UK, 407 pp.10.1201/b12913 ↗

34. Okeil, A. M.; El-Tawil, S.; and Shahawy, M., 2002, “Flexural Reliability of Reinforced Concrete Bridge Girders Strengthened with Carbon Fiber-Reinforced Polymer Laminates,” Journal of Bridge Engineering, ASCE, V. 7, No. 5, pp. 290-299. doi: 10.1061/(ASCE)1084-0702(2002)7:5(290)10.1061/(ASCE)1084-0702(2002)7:5(290) ↗

35. Rasheed, H. A., 2015, Strengthening Design of Reinforced Concrete with FRP, CRC Press, New York, NY, 226 pp.10.1201/b17968 ↗

36. Ray, I.; Parish, G. C.; Davalos, J. F.; and Chen, A., 2010, “Effect of Concrete Substrate Repair Methods for Beams Aged by Accelerated Corrosion and Strengthened with CFRP,” Journal of Aerospace Engineering, ASCE, V. 24, No. 2, pp. 227-239. doi: 10.1061/(ASCE)AS.1943-5525.000003010.1061/(ASCE)AS.1943-5525.0000030 ↗

37. Rousakis, T. C.; Saridaki, M. E.; Mavrothalassitou, S. A.; and Hui, D., 2016, “Utilization of Hybrid Approach Towards Advanced Database of Concrete Beams Strengthened in Shear with FRPs,” Composites. Part B, Engineering, V. 85, pp. 315-335. doi: 10.1016/j.compositesb.2015.09.03110.1016/j.compositesb.2015.09.031 ↗

38. Spinella, N., 2019, “Modeling of Shear Behavior of Reinforced Concrete Beams Strengthened with FRP,” Composite Structures, V. 215, pp. 351-364. doi: 10.1016/j.compstruct.2019.02.07310.1016/j.compstruct.2019.02.073 ↗

39. Stewart, M. G., 1996, “Serviceability Reliability Analysis of Reinforced Concrete Structures,” Journal of Structural Engineering, ASCE, V. 122, No. 7, pp. 794-803. doi: 10.1061/(ASCE)0733-9445(1996)122:7(794)10.1061/(ASCE)0733-9445(1996)122:7(794) ↗

40. Stewart, M. G., 2009, “Mechanical Behavior of Pitting Corrosion of Flexural and Shear Reinforcement and Its Effect on Structural Reliability of Corroding RC Beams,” Structural Safety, V. 31, No. 1, pp. 19-30. doi: 10.1016/j.strusafe.2007.12.00110.1016/j.strusafe.2007.12.001 ↗

41. Taki, A.; Firouzi, A.; and Mohammadzadeh, S., 2018, “Life Cycle Reliability Assessment of Reinforced Concrete Beams Shear‐Strengthened with Carbon Fiber Reinforced Polymer Strips in Accordance with fib Bulletin 14,” Structural Concrete, V. 19, No. 6, pp. 2017-2028. doi: 10.1002/suco.20170028910.1002/suco.201700289 ↗

42. Teng, J. G., and Chen, J. F., 2009, “Mechanics of Debonding in FRP-Plated RC Beams,” Proceedings of the Institution of Civil Engineers. Structures and Buildings, V. 162, No. 5, pp. 335-345. doi: 10.1680/stbu.2009.162.5.33510.1680/stbu.2009.162.5.335 ↗

43. Teng, J. G.; Lam, L.; and Chen, J. F., 2004, “Shear Strengthening of RC Beams with FRP Composites,” Progress in Structural Engineering and Materials, V. 6, No. 3, pp. 173-184. doi: 10.1002/pse.17910.1002/pse.179 ↗

44. Triantafillou, T. C., 1998, “Shear Strengthening of Reinforced Concrete Beams Using Epoxy-Bonded FRP Composites,” ACI Structural Journal, V. 95, No. 2, Mar.-Apr., pp. 107-115.10.14359/531 ↗

45. Triantafillou, T. C., and Antonopoulos, C. P., 2000, “Design of Concrete Flexural Members Strengthened in Shear with FRP,” Journal of Composites for Construction, ASCE, V. 4, No. 4, pp. 198-205. doi: 10.1061/(ASCE)1090-0268(2000)4:4(198)10.1061/(ASCE)1090-0268(2000)4:4(198) ↗

46. Val, D. V., and Trapper, P. A., 2008, “Probabilistic Evaluation of Initiation Time of Chloride-Induced Corrosion,” Reliability Engineering & System Safety, V. 93, No. 3, pp. 364-372. doi: 10.1016/j.ress.2006.12.01010.1016/j.ress.2006.12.010 ↗

47. Wieghaus, K.T. and Atadero, R.A., 2010, “Effect of Existing Structure and FRP Uncertainties on the Reliability of FRP-Based Repair,” Journal of Composites for Construction, ASCE, V. 15, No. 4, pp. 635-643.10.1061/(ASCE)CC.1943-5614.0000197 ↗

48. Yang, D. Y.; Frangopol, D. M.; and Teng, J. G., 2019, “Probabilistic Life-Cycle Optimization of Durability-Enhancing Maintenance Actions: Application to FRP Strengthening Planning,” Engineering Structures, V. 188, pp. 340-349. doi: 10.1016/j.engstruct.2019.02.05510.1016/j.engstruct.2019.02.055 ↗