Structural Performance of Geopolymer Concrete: Bond, Flexural, Shear, and Axial Strengths
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Zho, Y.-K., “Effect of Chemical Properties of Fly Ash on the Compressive Strength of Geopolymer,” PhD dissertation, Sungkyunkwan University, Suwon, Gyeonggi, Korea, 2019. (in Korean)
2. Davidovits, J., “High-Alkali Cements for 21st Century Concretes,” Concrete Technology: Past, Present, and Future: Proceedings of V. Mohan Malhotra Symposium, SP-144, P. K. Mehta, ed., American Concrete Institute, Farmington Hills, MI, 1994, pp. 383-397. doi: 10.14359/452310.14359/4523 ↗
3. Malhotra, V. M., “Introduction: Sustainable Development and Concrete Technology,” Concrete International, V. 24, No. 7, July 2002, p. 22.
4. Lee, N. K., and Lee, H. K., “Setting and Mechanical Properties of Alkali-Activated Fly Ash/Slag Concrete Manufactured at Room Temperature,” Construction and Building Materials, V. 47, Oct. 2013, pp. 1201-1209. doi: 10.1016/j.conbuildmat.2013.05.10710.1016/j.conbuildmat.2013.05.107 ↗
5. Davidovits, J., “Geopolymers: Inorganic Polymeric New Materials,” Journal of Thermal Analysis and Calorimetry, V. 37, No. 8, Aug. 1991, pp. 1633-1656. doi: 10.1007/BF0191219310.1007/BF01912193 ↗
6. Rangan, B. V., “Fly Ash-Based Geopolymer Concrete,” Research Report GC 4, Curtin University of Technology, Perth, WA, Australia, 2008, 44 pp.10.1201/9781420007657.ch26 ↗
7. Ma, C.-K.; Awang, A. Z.; and Omar, W., “Structural and Material Performance of Geopolymer Concrete: A Review,” Construction and Building Materials, V. 186, Oct. 2018, pp. 90-102. doi: 10.1016/j.conbuildmat.2018.07.11110.1016/j.conbuildmat.2018.07.111 ↗
8. Verma, M.; Dev, N.; Rahman, I.; Nigam, M.; Ahmed, M.; and Mallick, J., “Geopolymer Concrete: A Material for Sustainable Development in Indian Construction Industries,” Crystals, V. 12, No. 4, Apr. 2022, Article No. 514. doi: 10.3390/cryst1204051410.3390/cryst12040514 ↗
9. Sofi, M.; van Deventer, J. S. J.; Mendis, P. A.; and Lukey, G. C., “Engineering Properties of Inorganic Polymer Concretes (IPCs),” Cement and Concrete Research, V. 37, No. 2, Feb. 2007, pp. 251-257. doi: 10.1016/j.cemconres.2006.10.00810.1016/j.cemconres.2006.10.008 ↗
10. Nath, P., and Sarker, P. K., “Flexural Strength and Elastic Modulus of Ambient-Cured Blended Low-Calcium Fly Ash Geopolymer Concrete,” Construction and Building Materials, V. 130, Jan. 2017, pp. 22-31. doi: 10.1016/j.conbuildmat.2016.11.03410.1016/j.conbuildmat.2016.11.034 ↗
11. Soutsos, M.; Boyle, A. P.; Vinai, R.; Hadjierakleous, A.; and Barnett, S. J., “Factors Influencing the Compressive Strength of Fly Ash Based Geopolymers,” Construction and Building Materials, V. 110, May 2016, pp. 355-368. doi: 10.1016/j.conbuildmat.2015.11.04510.1016/j.conbuildmat.2015.11.045 ↗
12. Castillo, H.; Collado, H.; Droguett, T.; Sánchez, S.; Vesely, M.; Garrido, P.; and Palma, S., “Factors Affecting the Compressive Strength of Geopolymers: A Review,” Minerals, V. 11, No. 12, Dec. 2021, Article No. 1317. doi: 10.3390/min1112131710.3390/min11121317 ↗
13. RSN 336-84, “Republican Building Norms for Production and Use of Slag Alkaline Binders, Concretes and Structures,” The National Committee Ukrainian Republic of the USSR for Construction, Kyiv, Ukraine, 1984.
14. PAS 8820:2016, “Construction Materials. Alkali-Activated Cementitious Material and Concrete. Specification (Withdrawn 2024),” British Standards Institution, London, UK, 2016, 58 pp.
15. GB/T 29423-2012, “Alkali-Activated Slag-Fly Ash Concrete for Anticorrosive Cement Products,” Standardization Administration of the People’s Republic of China, Beijing, China, 2012.
16. Van Deventer, J. S. J.; Provis, J. L.; and Duxson, P., “Technical and Commercial Progress in the Adoption of Geopolymer Cement,” Minerals Engineering, V. 29, Mar. 2012, pp. 89-104. doi: 10.1016/j.mineng.2011.09.00910.1016/j.mineng.2011.09.009 ↗
17. Li, N.; Shi, C.; Zhang, Z.; Wang, H.; and Liu, Y., “A Review on Mixture Design Methods for Geopolymer Concrete,” Composites Part B: Engineering, V. 178, Dec. 2019, Article No. 107490. doi: 10.1016/j.compositesb.2019.10749010.1016/j.compositesb.2019.107490 ↗
18. Baktheer, A.; Spartali, H.; Hegger, J.; and Chudoba, R., “High-Cycle Fatigue of Bond in Reinforced High-Strength Concrete under Push-in Loading Characterized Using the Modified Beam-End Test,” Cement and Concrete Composites, V. 118, Apr. 2021, Article No. 103978. doi: 10.1016/j.cemconcomp.2021.10397810.1016/j.cemconcomp.2021.103978 ↗
19. Joint ACI-ASCE Committee 408, “Bond and Development of Straight Reinforcing Bars in Tension (ACI 408R-03),” American Concrete Institute, Farmington Hills, MI, 2003, 49 pp.
20. Abdulrahman, H.; Muhamad, R.; Visintin, P.; and Shukri, A. A., “Mechanical Properties and Bond Stress-Slip Behaviour of Fly Ash Geopolymer Concrete,” Construction and Building Materials, V. 327, Apr. 2022, Article No. 126909. doi: 10.1016/j.conbuildmat.2022.12690910.1016/j.conbuildmat.2022.126909 ↗
21. Adak, D.; Sarkar, M.; and Mandal, S., “Structural Performance of Nano-Silica Modified Fly-Ash Based Geopolymer Concrete,” Construction and Building Materials, V. 135, Mar. 2017, pp. 430-439. doi: 10.1016/j.conbuildmat.2016.12.11110.1016/j.conbuildmat.2016.12.111 ↗
22. Al-Azzawi, M.; Yu, T.; and Hadi, M. N. S., “Factors Affecting the Bond Strength Between the Fly Ash-Based Geopolymer Concrete and Steel Reinforcement,” Structures, V. 14, June 2018, pp. 262-272. doi: 10.1016/j.istruc.2018.03.01010.1016/j.istruc.2018.03.010 ↗
23. Albidah, A.; Altheeb, A.; Alrshoudi, F.; Abadel, A.; Abbas, H.; and Al-Salloum, Y., “Bond Performance of GFRP and Steel Rebars Embedded in Metakaolin Based Geopolymer Concrete,” Structures, V. 27, Oct. 2020, pp. 1582-1593. doi: 10.1016/j.istruc.2020.07.04810.1016/j.istruc.2020.07.048 ↗
24. Bilek, V.; Bonczková, S.; Hurta, J.; Pytlík, D.; and Mrovec, M., “Bond Strength Between Reinforcing Steel and Different Types of Concrete,” Procedia Engineering, V. 190, 2017, pp. 243-247. doi: 10.1016/j.proeng.2017.05.33310.1016/j.proeng.2017.05.333 ↗
25. Boopalan, C., and Rajamane, N. P., “An Investigation of Bond Strength of Reinforcing Bars in Fly Ash and GGBS Based Geopolymer Concrete,” MATEC Web of Conferences, V. 97, 2017, Article No. 01035. doi: 10.1051/matecconf/2017970103510.1051/matecconf/20179701035 ↗
26. Castel, A., and Foster, S. J., “Bond Strength between Blended Slag and Class F Fly Ash Geopolymer Concrete with Steel Reinforcement,” Cement and Concrete Research, V. 72, June 2015, pp. 48-53. doi: 10.1016/j.cemconres.2015.02.01610.1016/j.cemconres.2015.02.016 ↗
27. Doguparti, R. S., “A Study on Bond Strength of Geopolymer Concrete,” International Journal of Civil and Environmental Engineering, V. 9, No. 3, 2015, pp. 355-358. doi: 10.5281/zenodo.1107936
28. Farhan, N. A.; Sheikh, M. N.; and Hadi, M. N. S., “Experimental Investigation on the Effect of Corrosion on the Bond Between Reinforcing Steel Bars and Fibre Reinforced Geopolymer Concrete,” Structures, V. 14, June 2018, pp. 251-261. doi: 10.1016/j.istruc.2018.03.01310.1016/j.istruc.2018.03.013 ↗
29. Fernández-Jiménez, A. M.; Palomo, A.; and López-Hombrados, C., “Engineering Properties of Alkali-Activated Fly Ash Concrete,” ACI Materials Journal, V. 103, No. 2, Mar.-Apr. 2006, pp. 106-112. doi: 10.14359/1526110.14359/15261 ↗
30. Jiang, X.; Xiao, R.; Zhang, M.; Hu, W.; Bai, Y.; and Huang, B., “A Laboratory Investigation of Steel to Fly Ash-Based Geopolymer Paste Bonding Behavior after Exposure to Elevated Temperatures,” Construction and Building Materials, V. 254, Sept. 2020, Article No. 119267. doi: 10.1016/j.conbuildmat.2020.11926710.1016/j.conbuildmat.2020.119267 ↗
31. Zerfu, K., and Ekaputri, J. J., “Bond Strength in PVA Fibre Reinforced Fly Ash-Based Geopolymer Concrete,” Magazine of Civil Engineering, V. 101, No. 1, 2021, Article No. 10105. doi: 10.34910/MCE.101.5
32. Kim, J. S., and Park, J., “An Experimental Evaluation of Development Length of Reinforcements Embedded in Geopolymer Concrete,” Applied Mechanics and Materials, V. 578-579, July 2014, pp. 441-444. doi: 10.4028/www.scientific.net/AMM.578-579.44110.4028/www.scientific.net/AMM.578-579.441 ↗
33. Kumar, S.; Das, C. S.; Lao, J.; Alrefaei, Y.; and Dai, J.-G., “Effect of Sand Content on Bond Performance of Engineered Geopolymer Composites (EGC) Repair Material,” Construction and Building Materials, V. 328, Apr. 2022, Article No. 127080. doi: 10.1016/j.conbuildmat.2022.12708010.1016/j.conbuildmat.2022.127080 ↗
34. Laskar, S. M., and Talukdar, S., “Preparation and Tests for Workability, Compressive and Bond Strength of Ultra-Fine Slag Based Geopolymer as Concrete Repairing Agent,” Construction and Building Materials, V. 154, Nov. 2017, pp. 176-190. doi: 10.1016/j.conbuildmat.2017.07.18710.1016/j.conbuildmat.2017.07.187 ↗
35. Ling, Y.; Wang, K.; Li, W.; Shi, G.; and Lu, P., “Effect of Slag on the Mechanical Properties and Bond Strength of Fly Ash-Based Engineered Geopolymer Composites,” Composites Part B: Engineering, V. 164, May 2019, pp. 747-757. doi: 10.1016/j.compositesb.2019.01.09210.1016/j.compositesb.2019.01.092 ↗
36. Maranan, G. B.; Manalo, A. C.; Karunasena, W.; and Benmokrane, B., “Pullout Behaviour of GFRP Bars with Anchor Head in Geopolymer Concrete,” Composite Structures, V. 132, Nov. 2015, pp. 1113-1121. doi: 10.1016/j.compstruct.2015.07.02110.1016/j.compstruct.2015.07.021 ↗
37. Maranan, G.; Manalo, A.; Karunasena, K.; and Benmokrane, B., “Bond Stress-Slip Behavior: Case of GFRP Bars in Geopolymer Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 27, No. 1, Jan. 2015, p. 04014116. doi: 10.1061/(ASCE)MT.1943-5533.000104610.1061/(ASCE)MT.1943-5533.0001046 ↗
38. Mo, K. H.; Yeap, K. W.; Alengaram, U. J.; Jumaat, M. Z.; and Bashar, I. I., “Bond Strength Evaluation of Palm Oil Fuel Ash-Based Geopolymer Normal Weight and Lightweight Concretes with Steel Reinforcement,” Journal of Adhesion Science and Technology, V. 32, No. 1, 2018, pp. 19-35. doi: 10.1080/01694243.2017.133619510.1080/01694243.2017.1336195 ↗
39. Pandurangan, K.; Thennavan, M.; and Muthadhi, A., “Studies on Effect of Source of Flyash on the Bond Strength of Geopolymer Concrete,” Materials Today: Proceedings, V. 5, No. 5, Part 2, 2018, pp. 12725-12733. doi: 10.1016/j.matpr.2018.02.25610.1016/j.matpr.2018.02.256 ↗
40. Paswan, R.; Rahman, M. R.; Singh, S. K.; and Singh, B., “Bond Behavior of Reinforcing Steel Bar and Geopolymer Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 32, No. 7, July 2020, p. 04020167. doi: 10.1061/(ASCE)MT.1943-5533.000323710.1061/(ASCE)MT.1943-5533.0003237 ↗
41. Peng, K.-D.; Zeng, J.-J.; Huang, B.-T.; Huang, J.-Q.; Zhuge, Y.; and Dai, J.-G., “Bond Performance of FRP Bars in Plain and Fiber-Reinforced Geopolymer Under Pull-Out Loading,” Journal of Building Engineering, V. 57, Oct. 2022, Article No. 104893. doi: 10.1016/j.jobe.2022.10489310.1016/j.jobe.2022.104893 ↗
42. Rahman, S. K., and Al-Ameri, R., “Experimental Investigation and Artificial Neural Network Based Prediction of Bond Strength in Self-Compacting Geopolymer Concrete Reinforced with Basalt FRP Bars,” Applied Sciences, V. 11, No. 11, June 2021, Article No. 4889. doi: 10.3390/app1111488910.3390/app11114889 ↗
43. Romanazzi, V.; Leone, M.; Aiello, M. A.; and Pecce, M. R., “Bond Behavior of Geopolymer Concrete with Steel and GFRP Bars,” Composite Structures, V. 300, Nov. 2022, Article No. 116150. doi: 10.1016/j.compstruct.2022.11615010.1016/j.compstruct.2022.116150 ↗
44. Sajjad, U.; Sheikh, M. N.; and Hadi, M. N. S., “Improvement in Bond Strength of Steel Bar in Geopolymer Concrete by Adding Graphene Nanoplatelets,” Journal of Materials in Civil Engineering, ASCE, V. 35, No. 6, June 2023, p. 04023115. doi: 10.1061/JMCEE7.MTENG-1409310.1061/JMCEE7.MTENG-14093 ↗
45. Sarker, P. K., “Bond Strength of Reinforcing Steel Embedded in Fly Ash-Based Geopolymer Concrete,” Materials and Structures, V. 44, No. 5, June 2011, pp. 1021-1030. doi: 10.1617/s11527-010-9683-810.1617/s11527-010-9683-8 ↗
46. Sofi, M.; van Deventer, J. S. J.; Mendis, P. A.; and Lukey, G. C., “Bond Performance of Reinforcing Bars in Inorganic Polymer Concrete (IPC),” Journal of Materials Science, V. 42, No. 9, May 2007, pp. 3107-3116. doi: 10.1007/s10853-006-0534-510.1007/s10853-006-0534-5 ↗
47. Songpiriyakij, S.; Pulngern, T.; Pungpremtrakul, P.; and Jaturapitakkul, C., “Anchorage of Steel Bars in Concrete by Geopolymer Paste,” Materials & Design, V. 32, No. 5, May 2011, pp. 3021-3028. doi: 10.1016/j.matdes.2011.01.04810.1016/j.matdes.2011.01.048 ↗
48. Tekle, B. H.; Khennane, A.; and Kayali, O., “Bond Properties of Sand-Coated GFRP Bars with Fly Ash–Based Geopolymer Concrete,” Journal of Composites for Construction, ASCE, V. 20, No. 5, Oct. 2016, p. 04016025. doi: 10.1061/(ASCE)CC.1943-5614.000068510.1061/(ASCE)CC.1943-5614.0000685 ↗
49. Topark-Ngarm, P.; Chindaprasirt, P.; and Sata, V., “Setting Time, Strength, and Bond of High-Calcium Fly Ash Geopolymer Concrete,” Journal of Materials in Civil Engineering, V. 27, No. 7, July 2015, p. 04014198. doi: 10.1061/(ASCE)MT.1943-5533.000115710.1061/(ASCE)MT.1943-5533.0001157 ↗
50. Trabacchin, G.; Sebastian, W.; and Zhang, M., “Experimental and Analytical Study of Bond between Basalt FRP Bars and Geopolymer Concrete,” Construction and Building Materials, V. 315, Jan. 2022, Article No. 125461. doi: 10.1016/j.conbuildmat.2021.12546110.1016/j.conbuildmat.2021.125461 ↗
51. Zhang, H. Y.; Kodur, V.; Wu, B.; Yan, J.; and Yuan, Z. S., “Effect of Temperature on Bond Characteristics of Geopolymer Concrete,” Construction and Building Materials, V. 163, Feb. 2018, pp. 277-285. doi: 10.1016/j.conbuildmat.2017.12.04310.1016/j.conbuildmat.2017.12.043 ↗
52. Yang, T.; Xu, S.; Liu, Z.; Li, J.; Wu, P.; Yang, Y.; and Wu, C., “Experimental and Numerical Investigation of Bond Behavior between Geopolymer Based Ultra-High-Performance Concrete and Steel Bars,” Construction and Building Materials, V. 345, Aug. 2022, Article No. 128220. doi: 10.1016/j.conbuildmat.2022.12822010.1016/j.conbuildmat.2022.128220 ↗
53. Adak, D., and Mandal, S., “Strength and Durability Performance of Fly Ash–Based Process-Modified Geopolymer Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 31, No. 9, Sept. 2019, p. 04019174. doi: 10.1061/(ASCE)MT.1943-5533.000279310.1061/(ASCE)MT.1943-5533.0002793 ↗
54. Zheng, Y., and Xiao, Y., “A Comparative Study on Strength, Bond-Slip Performance and Microstructure of Geopolymer/Ordinary Recycled Brick Aggregate Concrete,” Construction and Building Materials, V. 366, Feb. 2023, Article No. 130257. doi: 10.1016/j.conbuildmat.2022.13025710.1016/j.conbuildmat.2022.130257 ↗
55. Nuroji; Primadyas, D. H.; Nurhuda, I.; and Muslikh, “The Comparison of Bond Strength between Geopolymer Concrete and OPC Concrete for Plain Reinforcing Bars,” MATEC Web of Conferences, V. 159, 2018, Article No. 01017. doi: 10.1051/matecconf/20181590101710.1051/matecconf/201815901017 ↗
56. Sayyad, A. S., and Patankar, S. V., “Effect of Steel Fibres and Low Calcium Fly Ash on Mechanical and Elastic Properties of Geopolymer Concrete Composites,” Indian Journal of Materials Science, V. 2013, No. 1, 2013, Article No. 357563. doi: 10.1155/2013/35756310.1155/2013/357563 ↗
57. Chinapaiya, B.; Parshwanath, R. N.; Radhakrishnan, J.; and Thirunavukkarasu, R., “Adhesive Bond Strength of Steel Bars Embedded in Fly Ash-GGBS-based Geopolymer Concrete,” Journal of Advanced Concrete Technology, V. 18, No. 11, 2020, pp. 716-729. doi: 10.3151/jact.18.71610.3151/jact.18.716 ↗
58. Zhao, J.; Wang, S.; Wang, Z.; Wang, K.; and Fu, C., “Bond Performance between FRP Bars and Geopolymer Concrete after Elevated Temperature Exposure,” Construction and Building Materials, V. 384, June 2023, Article No. 131476. doi: 10.1016/j.conbuildmat.2023.13147610.1016/j.conbuildmat.2023.131476 ↗
59. Le, H.-B.; Bui, Q.-B.; Nguyen, D.-M.; and Cheng, S., “Assessing the Mechanical Properties of Geopolymer Recycled Aggregate Concrete: Flexural Strength, Bond Strength and Thermo-Mechanical Behaviour,” Journal of the Australian Ceramic Society, V. 58, No. 5, Dec. 2022, pp. 1649-1665. doi: 10.1007/s41779-022-00801-710.1007/s41779-022-00801-7 ↗
60. Petcherdchoo, A.; Hongubon, T.; Thanasisathit, N.; Punthutaecha, K.; and Jang, S.-H., “Effect of Curing Time on Bond Strength between Reinforcement and Fly-ash Geopolymer Concrete,” Applied Science and Engineering Progress, V. 13, No. 2, 2020, pp. 127-135. doi: 10.14416/j.asep.2020.03.00610.14416/j.asep.2020.03.006 ↗
61. Cui, Y.; Qu, S.; Bao, J.; and Zhang, P., “Bond Performance of Steel Bar and Fly Ash-Based Geopolymer Concrete in Beam End Tests,” Polymers, V. 14, No. 10, May 2022, Article No. 2012. doi: 10.3390/polym1410201210.3390/polym14102012 ↗
62. Chang, E. H., “Shear and Bond Behaviour of Reinforced Fly Ash-Based Geopolymer Concrete Beams,” PhD thesis, Curtin University of Technology, Perth, WA, Australia, 2009, 409 pp.
63. Tekle, B. H.; Khennane, A.; and Kayali, O., “Bond of Spliced GFRP Reinforcement Bars in Alkali Activated Cement Concrete,” Engineering Structures, V. 147, Sept. 2017, pp. 740-751. doi: 10.1016/j.engstruct.2017.06.04010.1016/j.engstruct.2017.06.040 ↗
64. Ma, Z.; Yue, Q.; and Chen, Z., “A Beam Test Study on the Bond Performance between Epoxy-Coated Reinforcement and Geopolymer Concrete,” Buildings, V. 13, No. 2, Feb. 2023, Article No. 430. doi: 10.3390/buildings1302043010.3390/buildings13020430 ↗
65. Nawy, E. G., Reinforced Concrete: A Fundamental Approach, sixth edition, Pearson Prentice Hall, Upper Saddle River, NJ, 2008, 944 pp.
66. Ahmed, H. Q.; Jaf, D. K.; and Yaseen, S. A., “Flexural Strength and Failure of Geopolymer Concrete Beams Reinforced with Carbon Fibre-Reinforced Polymer Bars,” Construction and Building Materials, V. 231, Jan. 2020, Article No. 117185. doi: 10.1016/j.conbuildmat.2019.11718510.1016/j.conbuildmat.2019.117185 ↗
67. Akduman, Ş.; Kocaer, O.; Aldemir, A.; Şahmaran, M.; Yıldırım, G.; Almahmood, H.; and Ashour, A., “Experimental Investigations on the Structural Behaviour of Reinforced Geopolymer Beams Produced from Recycled Construction Materials,” Journal of Building Engineering, V. 41, Sept. 2021, Article No. 102776. doi: 10.1016/j.jobe.2021.10277610.1016/j.jobe.2021.102776 ↗
68. Aldemir, A.; Akduman, S.; Kocaer, O.; Aktepe, R.; Sahmaran, M.; Yildirim, G.; Almahmood, H.; and Ashour, A., “Shear Behaviour of Reinforced Construction and Demolition Waste-Based Geopolymer Concrete Beams,” Journal of Building Engineering, V. 47, Apr. 2022, Article No. 103861. doi: 10.1016/j.jobe.2021.10386110.1016/j.jobe.2021.103861 ↗
69. Du, Y.; Wang, J.; Shi, C.; Hwang, H.-J.; and Li, N., “Flexural Behavior of Alkali-Activated Slag-Based Concrete Beams,” Engineering Structures, V. 229, Feb. 2021, Article No. 111644. doi: 10.1016/j.engstruct.2020.11164410.1016/j.engstruct.2020.111644 ↗
70. Hawileh, R. A.; Badrawi, H. A.; Makahleh, H. Y.; Karzad, A. S.; and Abdalla, J. A., “Behavior of Reinforced Concrete Beams Cast with a Proposed Geopolymer Concrete (GPC) Mix,” International Journal of Applied Science and Engineering, V. 19, No. 2, June 2022, Article No. 2022017. doi: 10.6703/IJASE.202206_19(2).00910.6703/IJASE.202206_19(2).009 ↗
71. Kathirvel, P., and Kaliyaperumal, S. R. M., “Influence of Recycled Concrete Aggregates on the Flexural Properties of Reinforced Alkali Activated Slag Concrete,” Construction and Building Materials, V. 102, Part 1, Jan. 2016, pp. 51-58. doi: 10.1016/j.conbuildmat.2015.10.14810.1016/j.conbuildmat.2015.10.148 ↗
72. Sathish Kumar, V.; Ganesan, N.; Indira, P. V.; Murali, G.; and Vatin, N. I., “Flexural Behaviour of Hybrid Fibre-Reinforced Ternary Blend Geopolymer Concrete Beams,” Sustainability, V. 14, No. 10, May 2022, Article No. 5954. doi: 10.3390/su1410595410.3390/su14105954 ↗
73. Mamdouh, H.; Ali, A. M.; Osman, M. A.; Deifalla, A. F.; and Ayash, N. M., “Effects of Size and Flexural Reinforcement Ratio on Ambient-Cured Geopolymer Slag Concrete Beams under Four-Point Bending,” Buildings, V. 12, No. 10, Oct. 2022, Article No. 1554. doi: 10.3390/buildings1210155410.3390/buildings12101554 ↗
74. Maranan, G. B.; Manalo, A. C.; Benmokrane, B.; Karunasena, W.; and Mendis, P., “Evaluation of the Flexural Strength and Serviceability of Geopolymer Concrete Beams Reinforced with Glass-Fibre-Reinforced Polymer (GFRP) Bars,” Engineering Structures, V. 101, Oct. 2015, pp. 529-541. doi: 10.1016/j.engstruct.2015.08.00310.1016/j.engstruct.2015.08.003 ↗
75. Maranan, G. B.; Manalo, A. C.; Benmokrane, B.; Karunasena, W.; Mendis, P.; and Nguyen, T. Q., “Flexural Behavior of Geopolymer-Concrete Beams Longitudinally Reinforced with GFRP and Steel Hybrid Reinforcements,” Engineering Structures, V. 182, Mar. 2019, pp. 141-152. doi: 10.1016/j.engstruct.2018.12.07310.1016/j.engstruct.2018.12.073 ↗
76. Moazzenchi, S., and Oskouei, A. V., “A Comparative Experimental Study on the Flexural Behavior of Geopolymer Concrete Beams Reinforced with FRP Bars,” Journal of Rehabilitation in Civil Engineering, V. 11, No. 1, 2023, pp. 21-42. doi: 10.22075/JRCE.2022.25157.1569
77. Rashid, K.; Li, X.; Xie, Y.; Deng, J.; and Zhang, F., “Cracking Behavior of Geopolymer Concrete Beams Reinforced with Steel and Fiber Reinforced Polymer Bars under Flexural Load,” Composites Part B: Engineering, V. 186, Apr. 2020, Article No. 107777. doi: 10.1016/j.compositesb.2020.10777710.1016/j.compositesb.2020.107777 ↗
78. Sumajouw, M. D. J., and Rangan, B. V., “Low-Calcium Fly Ash-Based Geopolymer Concrete: Reinforced Beams and Columns,” Research Report GC 3, Curtin University of Technology, Perth, WA, Australia, 2006, 120 pp.
79. Tauqir, M.; Qazi, A. U.; Khan, Q. S.; Munir, M. J.; and Kazmi, S. M. S., “Shear Behavior of Geopolymer Concrete Slender Beams,” Buildings, V. 13, No. 5, May 2023, Article No. 1191. doi: 10.3390/buildings1305119110.3390/buildings13051191 ↗
80. Yost, J. R.; Radlińska, A.; Ernst, S.; Salera, M.; and Martignetti, N. J., “Structural Behavior of Alkali Activated Fly Ash Concrete. Part 2: Structural Testing and Experimental Findings,” Materials and Structures, V. 46, No. 3, Mar. 2013, pp. 449-462. doi: 10.1617/s11527-012-9985-010.1617/s11527-012-9985-0 ↗
81. Zhang, H.; Wan, K.; Wu, B.; and Hu, Z., “Flexural Behavior of Reinforced Geopolymer Concrete Beams with Recycled Coarse Aggregates,” Advances in Structural Engineering, V. 24, No. 14, Oct. 2021, pp. 3281-3298. doi: 10.1177/1369433221102622410.1177/13694332211026224 ↗
82. Darmawan, M. S.; Bayuaji, R.; Sugihardjo, H.; Husin, N. A.; and Anugraha Affandhie, R. B., “Shear Strength of Geopolymer Concrete Beams Using High Calcium Content Fly Ash in a Marine Environment,” Buildings, V. 9, No. 4, Apr. 2019, Article No. 98. doi: 10.3390/buildings904009810.3390/buildings9040098 ↗
83. Lee, K.-M.; Choi, S.; Choo, J. F.; Choi, Y.-C.; and Yoo, S.-W., “Flexural and Shear Behaviors of Reinforced Alkali-Activated Slag Concrete Beams,” Advances in Materials Science and Engineering, V. 2017, No. 1, 2017, Article No. 5294290. doi: 10.1155/2017/529429010.1155/2017/5294290 ↗
84. Madheswaran, C. K.; Ambily, P. S.; Lakshmanan, N.; Dattatreya, J. K.; and Jaffer Sathik, S. A., “Shear Behavior of Reinforced Geopolymer Concrete Thin-Webbed T-Beams,” ACI Materials Journal, V. 111, No. 1, Jan.-Feb. 2014, pp. 89-98. doi: 10.14359/5168644910.14359/51686449 ↗
85. Maranan, G. B.; Manalo, A. C.; Benmokrane, B.; Karunasena, W.; and Mendis, P., “Shear Behavior of Geopolymer Concrete Beams Reinforced with Glass Fiber-Reinforced Polymer Bars,” ACI Structural Journal, V. 114, No. 2, Mar.-Apr. 2017, pp. 337-348. doi: 10.14359/5168915010.14359/51689150 ↗
86. Maranan, G. B.; Manalo, A. C.; Benmokrane, B.; Karunasena, W.; Mendis, P.; and Nguyen, T. Q., “Shear Behaviour of Geopolymer-Concrete Beams Transversely Reinforced with Continuous Rectangular GFRP Composite Spirals,” Composite Structures, V. 187, Mar. 2018, pp. 454-465. doi: 10.1016/j.compstruct.2017.12.08010.1016/j.compstruct.2017.12.080 ↗
87. Mo, K. H.; Yeoh, K. H.; Bashar, I. I.; Alengaram, U. J.; and Jumaat, M. Z., “Shear Behaviour and Mechanical Properties of Steel Fibre-Reinforced Cement-Based and Geopolymer Oil Palm Shell Lightweight Aggregate Concrete,” Construction and Building Materials, V. 148, Sept. 2017, pp. 369-375. doi: 10.1016/j.conbuildmat.2017.05.01710.1016/j.conbuildmat.2017.05.017 ↗
88. Nikbakht, E.; Lok, J. W. W.; and Teo, W., “Structural Behaviour of Novel Composite Beams Consisting of Geopolymer Concrete and High-Performance Concrete,” Structures, V. 32, Aug. 2021, pp. 106-115. doi: 10.1016/j.istruc.2021.03.01410.1016/j.istruc.2021.03.014 ↗
89. Tran, T. T.; Pham, T. M.; and Hao, H., “Effect of Hybrid Fibers on Shear Behaviour of Geopolymer Concrete Beams Reinforced by Basalt Fiber Reinforced Polymer (BFRP) Bars without Stirrups,” Composite Structures, V. 243, July 2020, Article No. 112236. doi: 10.1016/j.compstruct.2020.11223610.1016/j.compstruct.2020.112236 ↗
90. Visintin, P.; Mohamed Ali, M. S.; Albitar, M.; and Lucas, W., “Shear Behaviour of Geopolymer Concrete Beams without Stirrups,” Construction and Building Materials, V. 148, Sept. 2017, pp. 10-21. doi: 10.1016/j.conbuildmat.2017.05.01010.1016/j.conbuildmat.2017.05.010 ↗
91. Wu, C.; Hwang, H.-J.; Shi, C.; Li, N.; and Du, Y., “Shear Tests on Reinforced Slag-Based Geopolymer Concrete Beams with Transverse Reinforcement,” Engineering Structures, V. 219, Sept. 2020, Article No. 110966. doi: 10.1016/j.engstruct.2020.11096610.1016/j.engstruct.2020.110966 ↗
92. Wight, J. K., and MacGregor, J. G., Reinforced Concrete: Mechanics and Design, sixth edition, Pearson Education, Inc., Upper Saddle River, NJ, 2012, 1157 pp.
93. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (318R-19) (Reapproved 2022),” American Concrete Institute, Farmington Hills, MI, 2019, 624 pp.
94. Ahmad, J.; Yu, T.; and Hadi, M. N. S., “Behavior of GFRP Bar Reinforced Geopolymer Concrete Filled GFRP Tube Columns under Different Loading Conditions,” Structures, V. 33, Oct. 2021, pp. 1633-1644. doi: 10.1016/j.istruc.2021.05.02310.1016/j.istruc.2021.05.023 ↗
95. Albitar, M.; Mohamed Ali, M. S.; and Visintin, P., “Experimental Study on Fly Ash and Lead Smelter Slag-Based Geopolymer Concrete Columns,” Construction and Building Materials, V. 141, June 2017, pp. 104-112. doi: 10.1016/j.conbuildmat.2017.03.01410.1016/j.conbuildmat.2017.03.014 ↗
96. Farhan, N. A.; Sheikh, M. N.; and Hadi, M. N. S., “Behaviour of Ambient Cured Steel Fibre Reinforced Geopolymer Concrete Columns Under Axial and Flexural Loads,” Structures, V. 15, Aug. 2018, pp. 184-195. doi: 10.1016/j.istruc.2018.07.00110.1016/j.istruc.2018.07.001 ↗
97. Farhan, N. A.; Sheikh, M. N.; and Hadi, M. N. S., “Behavior of Ambient-Cured Geopolymer Concrete Columns under Different Loads,” ACI Structural Journal, V. 115, No. 5, Sept. 2018, pp. 1419-1429. doi: 10.14359/5170225010.14359/51702250 ↗
98. Hadi, M. N. S.; Ali, S.; and Sheikh, M. N., “Experimental Study of GFRP-Reinforced Geopolymer Concrete Columns under Different Loading Conditions,” Journal of Composites for Construction, ASCE, V. 25, No. 6, Dec. 2021, p. 04021052. doi: 10.1061/(ASCE)CC.1943-5614.000116410.1061/(ASCE)CC.1943-5614.0001164 ↗
99. Maranan, G. B.; Manalo, A. C.; Benmokrane, B.; Karunasena, W.; and Mendis, P., “Behavior of Concentrically Loaded Geopolymer-Concrete Circular Columns Reinforced Longitudinally and Transversely with GFRP Bars,” Engineering Structures, V. 117, June 2016, pp. 422-436. doi: 10.1016/j.engstruct.2016.03.03610.1016/j.engstruct.2016.03.036 ↗
100. Nhabih, H. T.; Hussein, A. M.; and Salman, M. M., “Study a Structural Behavior of Eccentrically Loaded GFRP Reinforced Columns Made of Geopolymer Concrete,” Civil Engineering Journal, V. 6, No. 3, 2020, pp. 563-575. doi: 10.28991/cej-2020-0309149210.28991/cej-2020-03091492 ↗