Shear-Friction Strength of Reinforced Concrete Walls with 700 MPa Reinforcing Bars
Source abstract
Abstract
First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Seismic Performance and Analysis · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318R-19) (Reapproved 2022),” American Concrete Institute, Farmington Hills, MI, 2019, 624 pp.
2. ACI Committee 349, “Code Requirements for Nuclear Safety-Related Concrete Structures (ACI 349-13) and Commentary,” American Concrete Institute, Farmington Hills, MI, 2014, 196 pp.
3. Cheng, M.-Y.; Hung, S.-C.; Lequesne, R. D.; and Lepage, A., “Earthquake-Resistant Squat Walls Reinforced with High-Strength Steel,” ACI Structural Journal, V. 113, No. 5, Sept.-Oct. 2016, pp. 1065-1076. doi: 10.14359/5168882510.14359/51688825 ↗
4. Huq, M. S., “High-Strength Steel Bars in Earthquake-Resistant T-Shaped Concrete Walls,” PhD dissertation, University of Kansas, Lawrence, KS, 2018, 397 pp.
5. Kim, S.-H., and Park, H.-G., “Shear Strength of Reinforced Concrete Wall with 700 MPa Shear Reinforcement,” ACI Structural Journal, V. 118, No. 2, Mar. 2021, pp. 167-181.10.14359/51728191 ↗
6. Harries, K. A.; Zeno, G.; and Shahrooz, B., “Toward an Improved Understanding of Shear-Friction Behavior,” ACI Structural Journal, V. 109, No. 6, Nov.-Dec. 2012, pp. 835-844.10.14359/51684127 ↗
7. Kono, S.; Tanaka, H.; and Watanabe, F., “Interface Shear Transfer for High Strength Concrete and High Strength Shear Friction Reinforcement,” High Performance Materials in Bridges: Proceedings of the International Conference on High Performance Materials in Bridges, A. Azizinamini, A. Yakel, and M. Abdelrahman, eds., Kona, HI, 2001, pp. 319-328.10.1061/40691(2003)28 ↗
8. Baek, J.-W.; Park, H.-G.; Lee, B.-S.; and Shin, H.-M., “Shear-Friction Strength of Low-Rise Walls with 550 MPa (80 ksi) Reinforcing Bars under Cyclic Loading,” ACI Structural Journal, V. 115, No. 1, Jan. 2018, pp. 65-78. doi: 10.14359/5171802010.14359/51700915 ↗
9. Baek, J.-W.; Kim, S.-H.; Park, H.-G.; and Lee, B.-S., “Shear-Friction Strength of Low-Rise Walls with 600 MPa Reinforcing Bars,” ACI Structural Journal, V. 117, No. 1, Jan. 2020, pp. 169-182. doi: 10.14359/5171802010.14359/51718020 ↗
10. Kim, J.-H., and Park, H.-G., “Shear and Shear-Friction Strengths of Squat Walls with Flanges,” ACI Structural Journal, V. 117, No. 6, Nov. 2020, pp. 269-280. doi: 10.14359/5172807510.14359/51728075 ↗
11. Hawkins, N. M., and Ghosh, S. K., “Acceptance Criteria for Special Precast Concrete Structural Walls Based on Validation Testing,” PCI Journal, V. 49, No. 5, Sept.-Oct. 2004, pp. 78-92. doi: 10.15554/pcij.09012004.78.9210.15554/pcij.09012004.78.92 ↗
12. Baek, J. W.; Yang, H. K.; and Park, H. G., “Loading Rate Effect on Reinforced Concrete Walls with Low Aspect Ratios under High-Frequency Earthquake,” ACI Structural Journal, V. 117, No. 6, Nov. 2020, pp. 105-118.10.14359/51728059 ↗
13. Mattock, A. H., “Shear Transfer under Cyclically Reversing Loading, Across an Interface between Concretes Cast at Different Times,” 1977, 102 pp.
14. Zhang, Z.; Luo, D.; and Li, B., “Strain Nonlinearity and Shear Lag Effect in Compressive Flange of Reinforced Concrete Structural Walls,” ACI Structural Journal, V. 118, No. 3, May 2021, pp. 199-208.10.14359/51729359 ↗