Seismic Behavior of Reinforced Concrete Walls at Elevated Temperature
Source abstract
Abstract
First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Fire effects on concrete materials · Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Chen, Y.-S.; Yuann, Y.-R.; Dai, L.-C.; and Lin, Y.-P., “Pressure and Temperature Analyses Using GOTHIC for Mark I Containment of the Chinshan Nuclear Power Plant,” Nuclear Engineering and Design, V. 241, No. 5, 2011, pp. 1548-1558. doi: 10.1016/j.nucengdes.2011.02.00410.1016/j.nucengdes.2011.02.004 ↗
2. U.S. Nuclear Regulatory Commission, “Design Certification Applications for New Reactors,” Washington, DC, 2017, https://www.nrc.gov/reactors/new-reactors/design-cert.html. (last accessed July 2, 2019)
3. General Electric Nuclear Energy, “Design Control Document (DCD) for Advanced Boiling Water Reactor (ABWR),” Agencywide Documents Access and Management System Accession Number ML11126A100, U.S. Nuclear Regulatory Commission, Washington, DC, 1997.
4. Westinghouse Electric Company, “Design Control Document (DCD) for Advanced Passive 1000 (AP1000) Reactor,” Agencywide Documents Access and Management System Accession Number ML11171A303, U.S. Nuclear Regulatory Commission, Washington, DC, 2011.
5. General Electric Hitachi Nuclear Energy, “Design Control Document for Economic Simplified Boiling-Water Reactor (ESBWR),” Agencywide Documents Access and Management System Accession Number ML14100A493, U.S. Nuclear Regulatory Commission, Washington, DC, 2014.
6. ASCE/SEI 41-17, “Seismic Evaluation and Retrofit of Existing Buildings,” American Society of Civil Engineers, Reston, VA, 2017, 550 pp.
7. ASCE/SEI 4-16, “Seismic Analysis of Safety-Related Nuclear Structures,” American Society of Civil Engineers, Reston, VA, 2017, 304 pp.
8. ACI Committee 349, “Code Requirements for Nuclear Safety-Related Concrete Structures (ACI 349-13) and Commentary,” American Concrete Institute, Farmington Hills, MI, 2013, 196 pp.
9. Bhardwaj, S. R.; Sener, K. C.; and Varma, A. H., “Investigation of Accident Thermal Effects on Seismic Performance of Structural Walls,” Transactions, 24th International Conference on Structural Mechanics in Reactor Technology (SMiRT), Division VI, Paper ID 06-14-05, Busan, South Korea, 2017, 10 pp.
10. Bhardwaj, S. R., “Multi-Hazard In-Plane Response of SC Walls: Out-of-Plane and Accident Thermal Loadings,” PhD dissertation, Purdue University, West Lafayette, IN, 2018.
11. EN 1992-1-2:2004, “Eurocode 2: Design of Concrete Structures. Part 1-2: General Rules—Structural Fire Design,” European Committee for Standardization, Brussels, Belgium, 2004, 100 pp.
12. Takeuchi, M.; Hiramoto, M.; Kumagai, N.; Yamazaki, N.; Kodaira, A.; and Sugiyama, K., “Material Properties of Concrete and Steel Bars at Elevated Temperatures,” Transactions, 12th International Conference on Structural Mechanics in Reactor Technology (SMiRT), Stuttgart, Germany, 1993, pp. 133-138.
13. Edwards, W. T., and Gamble, W. L., “Strength of Grade 60 Reinforcing Bars after Exposure to Fire Temperatures,” Concrete International, V. 8, No. 10, Oct. 1986, pp. 17-19.
14. Khoury, G. A., “Effect of Fire on Concrete and Concrete Structures,” Progress in Structural Engineering and Materials, V. 2, No. 4, 2000, pp. 429-447. doi: 10.1002/pse.5110.1002/pse.51 ↗
15. Naus, D. J., “A Compilation of Elevated Temperature Concrete Material Property Data and Information for Use in Assessments of Nuclear Power Plant Reinforced Concrete Structures (NUREG/CR-7031),” U.S. Nuclear Regulatory Commission, Washington, DC, 2010, 328 pp.
16. Schneider, U., “Concrete at High Temperatures—A General Review,” Fire Safety Journal, V. 13, No. 1, 1988, pp. 55-68. doi: 10.1016/0379-7112(88)90033-110.1016/0379-7112(88)90033-1 ↗
17. Khoury, G. A., “Compressive Strength of Concrete at High Temperatures: A Reassessment,” Magazine of Concrete Research, V. 44, No. 161, 1992, pp. 291-309. doi: 10.1680/macr.1992.44.161.29110.1680/macr.1992.44.161.291 ↗
18. Willam, K.; Xi, Y.; Lee, K.; and Kim, B “Thermal Response of Reinforced Concrete Structures in Nuclear Power Plants,” Department of Civil, Environmental, and Architectural Engineering, University of Colorado, Boulder, CO, 2009, 210 pp.
19. ASTM C150/C150M-18, “Standard Specification for Portland Cement,” ASTM International, West Conshohocken, PA, 2018, 9 pp.
20. ASTM C39/C39M-18, “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens,” ASTM International, West Conshohocken, PA, 2018, 8 pp.
21. ASTM C496/C496M-17, “Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens,” ASTM International, West Conshohocken, PA, 2017, 5 pp.
22. Lu, X.; Sun, Q.; Feng, W.; and Tian, J., “Evaluation of Dynamic Modulus of Elasticity of Concrete Using Impact-Echo Method,” Construction and Building Materials, V. 47, 2013, pp. 231-239. doi: 10.1016/j.conbuildmat.2013.04.04310.1016/j.conbuildmat.2013.04.043 ↗
23. ASTM C215-14, “Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens,” ASTM International, West Conshohocken, PA, 2014, 7 pp.
24. Phan, L. T., and Carino, N. J., “Effects of Test Conditions and Mixture Proportions on Behavior of High-Strength Concrete Exposed to High Temperatures,” ACI Materials Journal, V. 99, No. 1, Jan.-Feb. 2002, pp. 54-66.10.14359/11317 ↗
25. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, MI, 2014, 519 pp.
26. Mindess, S.; Young, J. F.; and Darwin, D., Concrete, Prentice Hall, Englewood Cliffs, NJ, 2003.
27. Comite Euro-Internation du Beton, “Fire Design of Concrete Structures in Accordance with CEB/FIP Model Code 90,” Lausanne, Switzerland, 1991.
28. ASTM A706/A706M-16, “Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement,” ASTM International, West Conshohocken, PA, 2014, 7 pp.
29. Wood, S. L., “Shear Strength of Low-Rise Reinforced Concrete Walls,” ACI Structural Journal, V. 87, No. 1, Jan.-Feb. 1990, pp. 99-107.10.14359/2951 ↗
30. Gulec, C. K., and Whittaker, A. S., “Empirical Equations for Peak Shear Strength of Low Aspect Ratio Reinforced Concrete Walls,” ACI Structural Journal, V. 108, No. 1, Jan.-Feb. 2011, pp. 80-89.10.14359/51664205 ↗
31. Luna, B. N.; Rivera, J. P.; Epackachi, S.; and Whittaker, A. S., “Seismic Response of Low Aspect Ratio Reinforced Concrete Walls for Buildings and Safety-Related Nuclear Applications,” Report MCEER-18-0002, 2018, 456 pp.
32. ASTM E230/E230M-17, “Standard Specification for Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples,” ASTM International, West Conshohocken, PA, 2017, 168 pp.
33. Sozen, M. A., and Moehle, J. P., “Stiffness of Reinforced Concrete Walls Resisting In-Plane Shear,” Report No. EPRI TR-102731, Electrical Power Research Institute, Palo Alto, CA, 1993.
34. Luna, B. N.; Rivera, J. P.; and Whittaker, A. S., “Seismic Behavior of Low-Aspect-Ratio Reinforced Concrete Shear Walls,” ACI Structural Journal, V. 112, No. 5, Sept.-Oct. 2015, pp. 593-604. doi: 10.14359/5168770910.14359/51687709 ↗