Behavior of Steel Fiber-Reinforced Rubcrete Deep Beams under Shear

1. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, MI, 2014, 520 pp.

2. Gupta, T.; Sharma, R. K.; and Chaudhary, S., “Impact Resistance of Concrete Containing Waste Rubber Fiber and Silica Fume,” International Journal of Impact Engineering, V. 83, 2015, pp. 76-87. doi: 10.1016/j.ijimpeng.2015.05.00210.1016/j.ijimpeng.2015.05.002 ↗

3. Al-Tayeb, M. M.; Abu Bakar, B. H.; Akil, H. M.; and Ismail, H., “Effect of Partial Replacements of Sand and Cement by Waste Rubber on the Fracture Characteristics of Concrete,” Polymer-Plastics Technology and Engineering, V. 51, No. 6, 2012, pp. 583-589. doi: 10.1080/03602559.2012.65930710.1080/03602559.2012.659307 ↗

4. Najim, K. B., and Hall, M. R., “Crumb Rubber Aggregate Coatings/Pre-Treatments and Their Effects on Interfacial Bonding, Air Entrapment and Fracture Toughness in Self-Compacting Rubberised Concrete (SCRC),” Materials and Structures, V. 46, No. 12, 2013, pp. 2029-2043. doi: 10.1617/s11527-013-0034-410.1617/s11527-013-0034-4 ↗

5. Ganjian, E.; Khorami, M.; and Maghsoudi, A. A., “Scrap-Tyre-Rubber Replacement for Aggregate and Filler in Concrete,” Construction and Building Materials, V. 23, No. 5, 2009, pp. 1828-1836. doi: 10.1016/j.conbuildmat.2008.09.02010.1016/j.conbuildmat.2008.09.020 ↗

6. Reda Taha, M. M.; El-Dieb, A. S.; Abd El-Wahab, M. A.; and Abdel-Hameed, M. E., “Mechanical, Fracture, and Microstructural Investigations of Rubber Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 20, No. 10, 2008, pp. 640-649. doi: 10.1061/(ASCE)0899-1561(2008)20:10(640)10.1061/(ASCE)0899-1561(2008)20:10(640) ↗

7. Khatib, Z. K., and Bayomy, F. M., “Rubberized Portland Cement Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 11, No. 3, 1999, pp. 206-213. doi: 10.1061/(ASCE)0899-1561(1999)11:3(206)10.1061/(ASCE)0899-1561(1999)11:3(206) ↗

8. Topçu, I. B., “The Properties of Rubberized Concretes,” Cement and Concrete Research, V. 25, No. 2, 1995, pp. 304-310. doi: 10.1016/0008-8846(95)00014-310.1016/0008-8846(95)00014-3 ↗

9. Eldin, N. N., and Senouci, A. B., “Rubber-Tire Particles as Concrete Aggregate,” Journal of Materials in Civil Engineering, ASCE, V. 5, No. 4, 1993, pp. 478-496. doi: 10.1061/(ASCE)0899-1561(1993)5:4(478)10.1061/(ASCE)0899-1561(1993)5:4(478) ↗

10. Sgobba, S.; Borsa, M.; Molfetta, M.; and Marano, G. C., “Mechanical Performance and Medium-Term Degradation of Rubberised Concrete,” Construction and Building Materials, V. 98, 2015, pp. 820-831. doi: 10.1016/j.conbuildmat.2015.07.09510.1016/j.conbuildmat.2015.07.095 ↗

11. Segre, N., and Joekes, I., “Use of Tire Rubber Particles as Addition to Cement Paste,” Cement and Concrete Research, V. 30, No. 9, 2000, pp. 1421-1425. doi: 10.1016/S0008-8846(00)00373-210.1016/S0008-8846(00)00373-2 ↗

12. Khaloo, A.; Molaei Raisi, E.; Hosseini, P.; and Tahsiri, H., “Mechanical Performance of Self-Compacting Concrete Reinforced with Steel Fibers,” Construction and Building Materials, V. 51, 2014, pp. 179-186. doi: 10.1016/j.conbuildmat.2013.10.05410.1016/j.conbuildmat.2013.10.054 ↗

13. Altun, F., and Aktaş, B., “Investigation of Reinforced Concrete Beams Behavior of Steel Fiber Added Lightweight Concrete,” Construction and Building Materials, V. 38, 2013, pp. 575-581. doi: 10.1016/j.conbuildmat.2012.09.02210.1016/j.conbuildmat.2012.09.022 ↗

14. Olivito, R. S., and Zuccarello, F. A., “An Experimental Study on the Tensile Strength of Steel Fiber Reinforced Concrete,” Composites Part B: Engineering, V. 41, No. 3, 2010, pp. 246-255. doi: 10.1016/j.compositesb.2009.12.00310.1016/j.compositesb.2009.12.003 ↗

15. Nataraja, M. C.; Nagaraj, T. S.; and Basavaraja, S. B., “Reproportioning of Steel Fibre Reinforced Concrete Mixes and Their Impact Resistance,” Cement and Concrete Research, V. 35, No. 12, 2005, pp. 2350-2359. doi: 10.1016/j.cemconres.2005.06.01110.1016/j.cemconres.2005.06.011 ↗

16. Song, P. S., and Hwang, S., “Mechanical Properties of High-Strength Steel Fiber-Reinforced Concrete,” Construction and Building Materials, V. 18, No. 9, 2004, pp. 669-673. doi: 10.1016/j.conbuildmat.2004.04.02710.1016/j.conbuildmat.2004.04.027 ↗

17. Noaman, A. T.; Abu Bakar, B. H.; and Akil, H. M., “The Effect of Combination between Crumb Rubber and Steel Fiber on Impact Energy of Concrete Beams,” Procedia Engineering, V. 125, 2015, pp. 825-831. doi: 10.1016/j.proeng.2015.11.14810.1016/j.proeng.2015.11.148 ↗

18. Xie, J.; Guo, Y.; Liu, L.; and Xie, Z., “Compressive and Flexural Behaviors of a New Steel-Fibre-Reinforced Recycled Aggregate Concrete with Crumb Rubber,” Construction and Building Materials, V. 79, 2015, pp. 263-272. doi: 10.1016/j.conbuildmat.2015.01.03610.1016/j.conbuildmat.2015.01.036 ↗

19. Noaman, A. T.; Abu Bakar, B. H.; and Akil, H. M., “Experimental Investigation on Compression Toughness of Rubberized Steel Fibre Concrete,” Construction and Building Materials, V. 115, 2016, pp. 163-170. doi: 10.1016/j.conbuildmat.2016.04.02210.1016/j.conbuildmat.2016.04.022 ↗

20. Carroll, J. C., and Helminger, N., “Fresh and Hardened Properties of Fiber-Reinforced Rubber Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 28, No. 7, 2016, p. 04016027. doi: 10.1061/(ASCE)MT.1943-5533.000154110.1061/(ASCE)MT.1943-5533.0001541 ↗

21. Alsaif, A.; Bernal, S. A.; Guadagnini, M.; and Pilakoutas, K., “Durability of Steel Fibre Reinforced Rubberised Concrete Exposed to Chlorides,” Construction and Building Materials, V. 188, 2018, pp. 130-142. doi: 10.1016/j.conbuildmat.2018.08.12210.1016/j.conbuildmat.2018.08.122 ↗

22. Abu Bakar, B. H.; Noaman, A. T.; and Akil, H. M., “Cumulative Effect of Crumb Rubber and Steel Fiber on the Flexural Toughness of Concrete,” Engineering, Technology & Applied Science Research, V. 7, No. 1, 2017, pp. 1345-1352. doi: 10.48084/etasr.85410.48084/etasr.854 ↗

23. Nagarajan, P., and Pillai, T. M. M., “Analysis and Design of Simply Supported Deep Beams Using Strut and Tie Method,” Advances in Structural Engineering, V. 11, No. 5, 2008, pp. 491-499. doi: 10.1260/13694330878641205010.1260/136943308786412050 ↗

24. IS 1489:1991, “Portland Pozzolana Cement—Specification, Part 1—Fly Ash Based (Reaffirmed 2005),” Bureau of Indian Standards, New Delhi, India, 1991, 19 pp.

25. ASTM C494/C494M-05, “Standard Specification for Chemical Admixtures for Concrete,” ASTM International, West Conshohocken, PA, 2005, 9 pp.

26. IS 10262:2009, “Concrete Mix Proportioning—Guidelines,” Bureau of Indian Standards, New Delhi, India, 2009, 21 pp.

27. Kong, F.-K.; Robins, P. J.; and Cole, D. F., “Web Reinforcement Effects on Deep Beams,” ACI Journal Proceedings, V. 67, No. 12, Dec. 1970, pp. 1010-1018.10.14359/7336 ↗

28. Ramakrishnan, V., and Ananthanarayana, Y., “Ultimate Strength of Deep Beams in Shear,” ACI Journal Proceedings, V. 65, No. 2, Feb. 1968, pp. 87-98.10.14359/7458 ↗

29. Varghese, P. C., and Krishnamoorthy, C. S., “Strength and Behavior of Deep Reinforced Concrete Beams,” Indian Concrete Journal, V. 40, No. 3, 1966, pp. 104-108.

30. Ahmad, S. H.; Xie, Y.; and Yu, T., “Shear Ductility of Reinforced Lightweight Concrete Beams of Normal Strength and High Strength Concrete,” Cement and Concrete Composites, V. 17, No. 2, 1995, pp. 147-159. doi: 10.1016/0958-9465(94)00029-X10.1016/0958-9465(94)00029-X ↗

31. Rao, G. A.; Kunal, K.; and Eligehausen, R., “Shear Strength of RC Deep Beams,” Proceedings of the 6th International Conference on Fracture Mechanics of Concrete and Concrete Structures, V. 2, Catania, Italy, 2007, pp. 693-699.

32. CAN/CSA A23.3-14, “Design of Concrete Structures,” CSA Group, Toronto, ON, Canada, 2014, 297 pp.

33. AS 3600:2018, “Australian Standard for Concrete Structures,” Standards Australia, Sydney, Australia, 2018, 256 pp.