Influence of High-Strength Reinforcing Bars on Seismic Safety of Concrete Frames

1. ACI Committee 318, 2019, “Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318R-19),” American Concrete Institute, Farmington Hills, MI, 624 pp.

2. ASCE/SEI 7-16, 2017, “Minimum Design Loads and Associated Criteria for Buildings and Other Structures,” American Society of Civil Engineers, Reston, VA, 800 pp.

3. Berry, M.; Parrish, M.; and Eberhard, M., 2004, “PEER Structural Performance Database User’s Manual (Version 1.0),” University of California, Berkeley, Berkeley, CA, 43 pp.

4. Brown, J., and Kunnath, S. K., 2000, “Low Cycle Fatigue Behavior of Longitudinal Reinforcement in Reinforced Concrete Bridge Columns,” Department of Civil and Environmental Engineering, University of Central Florida, Orlando, FL, 108 pp.

5. Coffin, L. F. Jr., 1954, “A Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal,” Transactions of the American Society of Mechanical Engineers, V. 76, New York, pp. 931-950.10.1115/1.4015020 ↗

6. Downing, S. D., and Socie, D. F., 1982, “Simple Rainflow Counting Algorithms,” International Journal of Fatigue, V. 4, No. 1, Jan., pp. 31-40. doi: 10.1016/0142-1123(82)90018-410.1016/0142-1123(82)90018-4 ↗

7. FEMA P695, 2009, “Quantification of Building Seismic Performance Factors,” Federal Emergency Management Agency, Washington, DC, 421 pp.

8. Ghannoum, W. M., and Slavin, C. M., 2016, “Low-Cycle Fatigue Performance of High-Strength Steel Reinforcing Bars,” ACI Materials Journal, V. 113, No. 6, Nov.-Dec., pp. 803-814. doi: 10.14359/5168911610.14359/51689116 ↗

9. Haselton, C. B.; Liel, A. B.; Dean, B. S.; Chou, J. H.; and Deirlein, G. G., 2007, “Seismic Collapse Safety and Behavior of Modern Reinforced Concrete Moment Frame Buildings,” Proceedings, Structural Engineering Research Frontiers, Long Beach, CA, pp. 1-14.10.1061/40944(249)22 ↗

10. Haselton, C. B.; Liel, A. B.; Taylor-Lange, S. C.; and Deierlein, G. G., 2016, “Calibration of Model to Simulate Response of Reinforced Concrete Beam-Columns to Collapse,” ACI Structural Journal, V. 113, No. 6, Nov.-Dec., pp. 1141-1152. doi: 10.14359/5168924510.14359/51689245 ↗

11. Huq, M. S.; Weber-Kamin, A. S.; Ameen, S.; Lequesne, R. D.; and Lepage, A., 2017, “High-Strength Steel Bars in Reinforced Concrete Walls: Influence of Steel Mechanical Properties on Deformation Capacity,” Charles Pankow Foundation Research Grant No. 06-14, University of Kansas Center for Research, Inc., Lawrence, KS, 129 pp.

12. Ibarra, L. F.; Medina, R. A.; and Krawinkler, H., 2005, “Hysteretic Models that Incorporate Strength and Stiffness Deterioration,” Earthquake Engineering & Structural Dynamics, V. 34, No. 12, pp. 1489-1511. doi: 10.1002/eqe.49510.1002/eqe.495 ↗

13. Mander, J. B.; Panthaki, F. D.; and Kasalanati, A., 1994, “Low-Cycle Fatigue Behavior of Reinforcing Steel,” Journal of Materials in Civil Engineering, ASCE, V. 6, No. 4, Nov., pp. 453-468. doi: 10.1061/(ASCE)0899-1561(1994)6:4(453)10.1061/(ASCE)0899-1561(1994)6:4(453) ↗

14. Manson, S. S., 1965, “Fatigue—A Complex Subject—Some Simple Approximations (NASA-TM-X-52084),” National Aeronautics and Space Administration, Glenn Research Center at Lewis Field, Cleveland, OH, 107 pp.

15. Mazzoni, S.; McKenna, F.; Scott, M. H.; Fenves, G. L., 2006, “OpenSees Command Language Manual,” Pacific Earthquake Engineering Research (PEER) Center, July, 465 pp.

16. Miner, M. A., 1945, “Cumulative Damage in Fatigue,” Journal of Applied Mechanics, V. 12, No. 3, Sept., pp. A159-A164. doi: 10.1115/1.400945810.1115/1.4009458 ↗

17. Pugh, J. S.; Lowes, L. N.; and Lehman, D. E., 2015, “Nonlinear Line-Element Modeling of Flexural Reinforced Concrete Walls,” Engineering Structures, V. 104, Dec., pp. 174-192. doi: 10.1016/j.engstruct.2015.08.03710.1016/j.engstruct.2015.08.037 ↗

18. Smith, R. W.; Hirschberg, M. H.; and Manson, S. S., 1963, “Fatigue Behavior of Materials under Strain Cycling in Low and Intermediate Life Range,” National Aeronautics and Space Administration, Glenn Research Center at Lewis Field, Cleveland, OH, 57 pp.

19. Sokoli, D.; Limantono, A.; and Ghannoum, W. M., 2017, “Defining Structurally Acceptable Properties of High-Strength Steel Bars through Material and Column Testing—Part II: Column Testing Report,” Charles Pankow Foundation Research Grant No. 05-14, University of Texas at Austin, Austin, TX, 214 pp.

20. Sokoli, D.; Limantono, A.; and Ghannoum, W. M., 2020, “Special Moment Frames with High-Strength Reinforcement—Part 2: Columns,” ACI Structural Journal, V. 117, No. 2, Mar., pp. 253-265. doi: 10.14359/5172131910.14359/51721319 ↗

21. To, D. V., and Moehle, J. P., 2017, “Seismic Performance Characterization of Beams with High-Strength Reinforcement,” Charles Pankow Foundation Research Grant No. 04-14, Department of Civil and Environmental Engineering, University of California, Berkeley, Berkeley, CA, 140 pp.

22. To, D. V., and Moehle, J. P., 2020, “Special Moment Frames with High-Strength Reinforcement—Part 1: Beams,” ACI Structural Journal, V. 117, No. 2, Mar., pp. 239-252.10.14359/51721318 ↗

23. Vamvatsikos, D., and Cornell, C. A., 2002, “Incremental Dynamic Analysis,” Earthquake Engineering & Structural Dynamics, V. 31, No. 3, Mar., pp. 491-514. doi: 10.1002/eqe.14110.1002/eqe.141 ↗

24. Zhao, J., and Sritharan, S., 2007, “Modeling of Strain Penetration Effects in Fiber-Based Analysis of Reinforced Concrete Structures,” ACI Structural Journal, V. 104, No. 2, Mar.-Apr., pp. 133-141.10.14359/18525 ↗

25. Zhong, K., and Deierlein, G. G., 2019, “Low-Cycle Fatigue Effects on the Seismic Performance of Concrete Frame and Wall Systems with High Strength Reinforcing Steel,” Charles Pankow Foundation Research Grant No. 02-16, Stanford University, Stanford, CA, 175 pp.