Splice Strength of Reinforcing Bars with High and Low Alternating Ribs
Source abstract
Abstract
First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Abrams, D. A., 1913, “Tests of Bond Between Concrete and Steel,” Bulletin No. 71, Engineering Experiment Station, University of Illinois, Urbana, IL.
2. ACI Committee 318, 2014, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary,” American Concrete Institute, Farmington Hills, MI, 519 pp.
3. ACI Committee 408, 2001, “Splice and Development of High Relative Rib Area Reinforcing Bars in Tension (ACI 408.3-01) and Commentary (ACI 408.3R-01),” American Concrete Institute, Farmington Hills, MI, 6 pp.
4. ASTM A615-90, 1990 “Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement,” V. 1.04, ASTM International, West Conshohocken, PA, pp. 389-392.
5. Cairns, J., 1979, “An Analysis of Ultimate Strength of Lapped Joints of Compression Reinforcement,” Magazine of Concrete Research, V. 31, No. 106, pp. 19-27. doi: 10.1680/macr.1979.31.106.1910.1680/macr.1979.31.106.19 ↗
6. Cairns, J., and Jones, K., 1995, “Influence of Rib Geometry on Strength of Lapped Joints: an Experimental and Analytical Study,” Magazine of Concrete Research, V. 47, No. 172, pp. 253-262. doi: 10.1680/macr.1995.47.172.25310.1680/macr.1995.47.172.253 ↗
7. Choi, O. C., and Choi, H., 2017, “Bearing Angle Model for Bond of Reinforcing Bars in Concrete,” ACI Structural Journal, V. 114, No. 1, Jan.-Feb., pp. 245-253.10.14359/51689256 ↗
8. Choi, O. C.; Hadje-Ghaffari, H.; Darwin, D.; and McCabe, S. L., 1991, “Bond of Epoxy-Coated Reinforcement: Bar Parameters,” ACI Materials Journal, V. 88, No. 2, Mar.-Apr., pp. 207-217.10.14359/2023 ↗
9. Choi, O. C., and Lee, W. S., 2002, “Interfacial Bond Analysis of Deformed Bars to Concrete,” ACI Structural Journal, V. 99, No. 6, Nov.-Dec., pp. 750-756.10.14359/12339 ↗
10. Clark, A. P., 1949, “Bond of Concrete to Reinforcing Bars,” ACI Journal Proceedings, V. 46, Nov., pp. 161-184.10.14359/12050 ↗
11. Cox, J. V., and Yu, H., 2001, “Radial Elastic Stiffness Associated with Bond between Steel Bars and Concrete,” ACI Structural Journal, V. 98, No. 1, Jan.-Feb., pp. 16-28.10.14359/10143 ↗
12. Darwin, D., and Graham, E. K., 1993, “Effect of Deformation Height and Spacing on Bond Strength of Reinforcing Bars,” ACI Structural Journal, V. 90, No. 6, Nov.-Dec., pp. 646-657.10.14359/4459 ↗
13. Darwin, D.; McCabe, S. L.; Idun, E. K.; and Schoenekase, S. P., 1992, “Development Length Criteria: Bars Not Confined by Transverse Reinforcement,” ACI Structural Journal, V. 89, No. 6, Nov.-Dec., pp. 709-720.10.14359/4158 ↗
14. Darwin, D.; Tholen, M. L.; Idun, E. K.; and Zuo, J., 1996, “Splice Strength of High Relative Rib Area Reinforcing Bars,” ACI Structural Journal, V. 93, No. 1, Jan-Feb., pp. 95-107.10.14359/9680 ↗
15. EN 1992-1-1, 2004, “Design of Concrete Structures – Part 1-1: General Rules and Rules for Buildings,” Comite Euro-international du Beton, Brussels, Belgium, 225 pp.
16. Esfahani, M. R., and Rangan, B. V., 1998, “Bond Between Normal Strength and High-Strength Concrete and Reinforcing Bars in Splices in Beams,” ACI Structural Journal, V. 95, No. 3, May-June, pp. 272-280.10.14359/545 ↗
17. Gambarova, P. G., and Rosati, G. P., 1997, “Bond and Splitting in Bar Pull-Out: Behavioural Laws and Concrete-cover Role,” Magazine of Concrete Research, V. 49, No. 6, pp. 99-110. doi: 10.1680/macr.1997.49.179.9910.1680/macr.1997.49.179.99 ↗
18. Ghandehari, M.; Krishnaswamy, S.; and Shah, S., 1999, “Technique for Evaluating Kinematics between Rebars and Concrete,” Journal of Engineering Mechanics, ASCE, V. 125, No. 2, pp. 234-241. doi: 10.1061/(ASCE)0733-9399(1999)125:2(234)10.1061/(ASCE)0733-9399(1999)125:2(234) ↗
19. Kimura, H., and Jirsa, J. O., 1992, “Effects of Bar Deformation and Concrete Strength on Bond of Reinforcing Steel to Concrete,” PMFSEL Report No. 92-4, Phil M. Ferguson Structural Engineering Laboratory, University of Texas at Austin, Austin, TX, 78 pp.
20. Metelli, G. M., and Plizzari, G. A., 2014, “Influence of the Relative Rib Area on Bond Behaviour,” Magazine of Concrete Research, V. 66, No. 6, pp. 277-294. doi: 10.1680/macr.13.0019810.1680/macr.13.00198 ↗
21. Orangun, C. O.; Jirsa, J. O.; and Breen, J. E., 1977, “A Reevaluation of Test Data on Development Length and Splices,” ACI Journal Proceedings, V. 74, No. 3, Mar., pp. 114-122.10.14359/10993 ↗
22. Rehm, G., “The Fundamental Law of Bond,” RILEM-Symposium on Bond and Crack Formation in Reinforced Concrete, V. II, Stockholm, 1957, pp. 491.
23. Skorbogatov, S. M., and Edwards, A. D., 1979, “The Influence of Geometry of Deformed Steel Bars on Their Bond Strength in Concrete: Bar Parameters,” ACI Materials Journal, V. 88, No. 2, Mar.-Apr., pp. 207-221.
24. Soretz, S., and Holzenbein, H., 1979, “Influence of Rib Dimensions of Reinforcing Bars on Bond and Bendability,” ACI Journal Proceedings, V. 76, No. 1, Jan., pp. 111-127.10.14359/6939 ↗
25. Tepfers, R., 1973, “A Theory of Bond Applied to Overlapped Tensile Reinforcement Splices for Deformed Bars,” Chalmers University of Technology, Goteborg, Sweden, Publication 73/2.
26. Zuo, J., and Darwin, D., 2000, “Splice strength of Conventional and High Relative Rib Area Bars in Normal and High Strength Concrete,” ACI Structural Journal, V. 97, No. 4, July-Aug., pp. 630-641.10.14359/7428 ↗