Structural Model for Interstory Drift Capacity of Flat Slabs without Shear Reinforcement
Source abstract
Abstract
First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Seismic Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, MI, 2014, 519 pp.
2. Pan, A., and Moehle, J. P., “Lateral Displacement Ductility of Reinforced Concrete Flat Plates,” ACI Structural Journal, V. 86, No. 3, May-June 1989, pp. 250-258.10.14359/2889 ↗
3. Hueste, M. B. D., and Wight, J. K., “Nonlinear Punching Shear Failure Model for Interior Slab-Column Connections,” Journal of Structural Engineering, ASCE, V. 125, No. 9, 1999, pp. 997-1008. doi: 10.1061/(ASCE)0733-9445(1999)125:9(997)10.1061/(ASCE)0733-9445(1999)125:9(997) ↗
4. Broms, C. E., “Design Method for Imposed Rotations of Interior Slab-Column Connections,” ACI Structural Journal, V. 106, No. 5, Sept.-Oct. 2009, pp. 636-645.10.14359/51663104 ↗
5. Drakatos, J. S.; Muttoni, A.; and Beyer, K., “Mechanical Model for Drift-Induced Punching of Slab-Column Connections without Transverse Reinforcement,” ACI Structural Journal, V. 115, No. 2, Mar. 2018, pp. 463-474. doi: 10.14359/5170111010.14359/51701110 ↗
6. Muttoni, A., “Punching Shear Strength of Reinforced Concrete Slabs without Transverse Reinforcement,” ACI Structural Journal, V. 105, No. 4, July-Aug. 2008, pp. 440-450.10.14359/19858 ↗
7. EN 1992-1-1, “Design of Concrete Structures – Part 1-1: General Rules and Rules for Buildings,” Comite Euro-international du Beton, Brussels, Belgium, 2004, 225 pp.
8. Elstner, R. C., and Hognestad, E., “Shearing Strength of Reinforced Concrete Slabs,” ACI Journal Proceedings, V. 53, No. 2, Feb. 1956, pp. 29-58.10.14359/11501 ↗
9. Broms, C. E., “Tangential Strain Theory for Punching Failure of Flat Slabs,” ACI Structural Journal, V. 113, No. 1, Jan.-Feb. 2016, pp. 95-104. doi: 10.14359/5168794210.14359/51687942 ↗
10. Kanoh, Y., and Yoshizaki, S., “Experiments on Slab-Column and Slab-Wall Connections of Flat Plate Structures,” Concrete Journal, V. 13, June 1975, pp. 7-19. (in Japanese)
11. Islam, S., and Park, R., “Tests on Slab-Column Connections with Shear and Unbalanced Flexure,” Journal of the Structural Division, ASCE, V. 102, Mar. 1976, pp. 549-568.10.1061/JSDEAG.0004296 ↗
12. Morrison, D. G.; Hirasawa, I.; and Sozen, M. A., “Lateral-Load Tests of RC Slab-Column Connections,” Journal of Structural Engineering, ASCE, V. 109, No. 11, 1983, pp. 2698-2714. doi: 10.1061/(ASCE)0733-9445(1983)109:11(2698)10.1061/(ASCE)0733-9445(1983)109:11(2698) ↗
13. Zee, H. L., and Moehle, J. P., “Behavior of Interior and Exterior Flat Plate Connections Subjected to Inelastic Load Reversals,” Report UCB/EERC 84/07, Earthquake Engineering Research Center, College of Engineering, University of California, Berkeley, Berkeley, CA, Aug. 1984, 145 pp.
14. Pan, A., and Moehle, J. P., “An Experimental Study of Slab-Column Connections,” ACI Structural Journal, V. 86, No. 6, Nov.-Dec. 1992, pp. 626-638.
15. Cao, H., “Seismic Design of Slab-Column Connections,” master’s thesis, University of Calgary, Calgary, AB, Canada, 1993, 201 pp.
16. Robertson, I. N.; Kawai, T.; Lee, J.; and Enomoto, B., “Cyclic Testing of Slab-Column Connections with Shear Reinforcement,” ACI Structural Journal, V. 99, No. 5, Sept.-Oct. 2002, pp. 605-613.10.14359/12300 ↗
17. Stark, A.; Binici, B.; and Bayrak, O., “Seismic Upgrade of Reinforced Concrete Slab-Column Connections Using Carbon Fiber-Reinforced Polymers,” ACI Structural Journal, V. 102, No. 2, Mar.-Apr. 2005, pp. 324-333.10.14359/14284 ↗
18. Robertson, I. N., and Johnson, G., “Cyclic Lateral Loading of Nonductile Slab-Column Connections,” ACI Structural Journal, V. 103, No. 3, May-June 2006, pp. 356-364.10.14359/15313 ↗
19. Choi, M.-S.; Cho, I.-J.; Han, B.-S.; Ahn, J.-M.; and Shin, S.-W., “Experimental Study of Interior Slab-Column Connections Subjected to Vertical Shear and Cyclic Moment Transfer,” Key Engineering Materials, V. 348-349, Sept. 2007, pp. 641-644. doi: 10.4028/www.scientific.net/KEM.348-349.64110.4028/www.scientific.net/KEM.348-349.641 ↗
20. Park, Y.-M.; Han, S.-W.; and Ryu, J.-H., “Comparison of Seismic Behaviors of Interior Joints in PT and RC Flat Plate Systems,” Key Engineering Materials, V. 348-349, Sept. 2007, pp. 741-745.10.4028/www.scientific.net/KEM.348-349.741 ↗
21. Kang, T. H.-K., and Wallace, J. W., “Seismic Performance of Reinforced Concrete Slab-Column Connections with Thin Plate Stirrups,” ACI Structural Journal, V. 105, No. 5, Sept.-Oct. 2008, pp. 617-625.10.14359/19945 ↗
22. Tian, Y.; Jirsa, J. O.; Bayrak, O.; and Widianto, and Argudo, J. F., “Behavior of Slab-Column Connections of Existing Flat-Plate Structures,” ACI Structural Journal, V. 105, No. 5, Sept.-Oct. 2008, pp. 561-569.10.14359/19939 ↗
23. Cho, Y. S., “Structural Performance of RC Flat Plate Slab Shear-Reinforced Interior Connections under Lateral Loading,” Magazine of Concrete Research, V. 61, No. 3, 2009, pp. 155-164. doi: 10.1680/macr.2007.0005910.1680/macr.2007.00059 ↗
24. Choi, J.-W.; Ali, M.; and Alexander, S. D. B., “Behavior of Slab-Column Connections with Partially Debonded Reinforcement under Lateral Loading,” Canadian Journal of Civil Engineering, V. 36, No. 3, 2009, pp. 463-472. doi: 10.1139/L09-00610.1139/L09-00610.1139/L09-006 ↗
25. Park, H.-G.; Kim, Y.-N.; Song, J.-G.; and Kang, S.-M., “Lattice Shear Reinforcement for Enhancement of Slab-Column Connections,” Journal of Structural Engineering, ASCE, V. 138, No. 3, 2012, pp. 425-437. doi: 10.1061/(ASCE)ST.1943-541X.000048410.1061/(ASCE)ST.1943-541X.0000484 ↗
26. Drakatos, I. S.; Beyer, K.; and Muttoni, A., “Internal Slab-Column Connections under Monotonic and Cyclic Imposed Rotations,” Engineering Structures, V. 123, Sept. 2016, pp. 501-516. doi: 10.1016/j.engstruct.2016.05.03810.1016/j.engstruct.2016.05.038 ↗
27. Ghali, A.; Sargious, M. A.; and Huizer, A., “Vertical Prestressing of Flat Plates around Columns,” Shear Transfer of Reinforced Concrete Beams under Reversed Loading, SP-42, V. 2, R. H. Brown and J. O. Jirsa, eds., American Concrete Institute, Farmington Hills, MI, 1974, pp. 905-920.
28. Stamenkovic, A., and Chapman, J. C., “Local Strength at Column Heads in Flat Slabs Subjected to a Combined Vertical and Horizontal Loading,” Institution of Civil Engineers Proceedings, V. 57, No. 2, 1974, pp. 205-232. doi: 10.1680/iicep.1974.405410.1680/iicep.1974.4054 ↗
29. Ghali, A.; Elmasri, M.; and Dilger, W., “Punching of Flat Plates under Static and Dynamic Horizontal Forces,” ACI Journal Proceedings, V. 73, No. 10, Oct. 1976, pp. 566-572.10.14359/11097 ↗
30. Elgabry, A., and Ghali, A., “Tests on Concrete Slab-Column Connections with Stud-Shear Reinforcement Subjected to Shear-Moment Transfer,” ACI Structural Journal, V. 84, No. 5, Sept.-Oct. 1987, pp. 433-442.10.14359/1656 ↗
31. Moe, J., “Shearing Strength of Reinforced Concrete Slabs and Footings under Concentrated Loads,” Bulletin D46, Portland Cement Association, Research and Development Laboratories, Skokie, IL, 1961, 135 pp.
32. Anis, N. N., “Shear Strength of Reinforced Concrete Flat Slabs Without Shear Reinforcement,” doctoral thesis, Imperial College of Science and Technology, London, UK, 1970, 265 pp.
33. Narasimhan, N., “Shear Reinforcement 1 in Reinforced Concrete Column Heads,” doctoral thesis, Imperial College of Science and Technology, London, UK, 1971, 268 pp.
34. Hawkins, N.; Bao, A.; and Yamazaki, J., “Moment Transfer from Concrete Slabs to Columns,” ACI Structural Journal, V. 86, No. 6, Nov.-Dec. 1989, pp. 705-716.10.14359/2752 ↗
35. Kamaraldin, K., “Punching Shear and Moment Transfer in Reinforced Concrete Flat Slabs,” doctoral thesis, The Polytechnic of Central London, London, UK, 1990, 287 pp.
36. Marzouk, H.; Emam, M.; and Hilal, M. S., “Effect of High-Strength Concrete Columns on the Behavior of Slab-Column Connections,” ACI Structural Journal, V. 93, No. 5, Sept.-Oct. 1996, pp. 545-552.10.14359/9713 ↗
37. Krüger, G., “Eccentric Punching Resistance of Flat Slabs,” doctoral thesis, No. 2064, EPFL, Lausanne, Switzerland, 1999, 191 pp. (in French)
38. Binici, B., and Bayrak, O., “Upgrading of Slab-Column Connections Using Fiber Reinforced Polymers,” Engineering Structures, V. 27, No. 1, 2005, pp. 97-107. doi: 10.1016/j.engstruct.2004.09.00510.1016/j.engstruct.2004.09.005 ↗
39. Ben-Sasi, O. M., “Tests of Interior Flat Slab-Column Connections Transferring Shear Force and Moment,” 37th Conference on Our World in Concrete & Structures, Singapore, Aug. 2012.