Side-Face Blowout Strength of 43 and 57 mm (No. 14 and No. 18) Hooked Bars in Beam-Column Joints
Source abstract
Abstract
First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Structural Engineering and Vibration Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, MI, 2014, 519 pp.
2. ACI Committee 349, “Code Requirement for Nuclear Safety-Related Concrete Structures (ACI 349-13) and Commentary,” American Concrete Institute, Farmington Hills, MI, 2013, 196 pp.
3. ACI-ASME Joint Technical Committee, “Code for Concrete Containments,” The American Society of Mechanical Engineers, New York, NY, 2015, 188 pp.
4. Minor, J., and Jirsa, J. O., “Behavior of Bent Bar Anchorage,” ACI Journal Proceedings, V. 72, No. 4, Apr. 1975, pp. 141-149.10.14359/11128 ↗
5. Marques, J. L. G., and Jirsa, J. O., “A Study of Hooked Bar Anchorages in Beam-Column Joints,” ACI Journal Proceedings, V. 72, No. 5, May 1975, pp. 198-209.10.14359/11131 ↗
6. Pinc, R. L.; Watkins, M. D.; and Jirsa, J. O., “Strength of Hooked Bar Anchorages in Beam-Column Joints,” Department of Civil Engineering, Structures Research Laboratory, University of Texas at Austin, Austin, TX, 1977, 67 pp.
7. Johnson, L. A., and Jirsa, J. O., “The Influence of Short Embedment and Close Spacing on the Strength of Hooked Bar Anchorages,” Phil M. Ferguson Structural Engineering Laboratory, Department of Civil Engineering, University of Texas at Austin, Austin, TX, Apr. 1981, 93 pp.
8. Soroushian, P.; Obaseki, K.; Nagi, M.; and Rojas, M. C., “Pullout Behavior of Hooked Bars in Exterior Beam-Column Connections,” ACI Structural Journal, V. 85, No. 3, May-June 1988, pp. 269-276.10.14359/2623 ↗
9. Hamad, B. S.; Jirsa, J. O.; and De Paulo, N. I. D., “Anchorage Strength of Epoxy-Coated Hooked Bars,” ACI Structural Journal, V. 90, No. 2, Mar.-Apr. 1993, pp. 210-217.10.14359/4127 ↗
10. Joh, O., and Shibata, T., “Anchorage Behavior of 90-Degree Hooked Beam Bars in Reinforced Concrete Beam-Column Joints ” Eleventh World Conference on Earthquake Engineering, 1996, 8 pp.
11. Sperry, J.; Al-Yasso, S.; Searle, N.; DeRubeis, M.; Darwin, D.; O’Reilly, M.; Matamoros, A.; Feldman, L.; Lepage, A.; Lequesne, R.; and Ajaam, A., “Anchorage of High-Strength Reinforcing Bars with Standard Hooks,” SM Report No. 111, University of Kansas, Lawrence, KS, June 2015, 243 pp.
12. ASTM C39/C39M-14, “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens,” ASTM International, West Conshohocken, PA, 2014, 7 pp.
13. Joint ACI-ASCE Committee 352, “Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures (ACI 352R-02),” American Concrete Institute, Farmington Hills, MI, 2002, 37 pp.
14. ASTM A706-14, “Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement,” ASTM International, West Conshohocken, PA, 2014, 7 pp.
15. ASTM A605-15, “Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement,” ASTM International, West Conshohocken, PA, 2015, 8 pp.
16. Furche, J., and Eligehausen, R., “Lateral Blow-Out Failure of Headed Studs Near a Free Edge,” Anchors in Concrete—Design and Behavior, SP-130, American Concrete Institute, Farmington Hills, MI, 1991, pp. 235-252.
17. Chun, S.-C.; Choi, C.-S.; and Jung, H.-S., “Side-Face Blowout Failure of large-Diameter High-Strength Headed Bars in Beam-Column Joints,” ACI Structural Journal, V. 114, No. 1, Jan.-Feb. 2017, pp. 161-172. doi: 10.14359/5168916110.14359/51689161 ↗
18. Joint ACI-ASCE Committee 408, “Suggested Development, Splice, and Standard Hook Provisions for Deformed Bars in Tension,” Concrete International, V. 1, No. 7, July 1979, pp. 44-46.
19. Eligehausen, R.; Mallée, R.; and Silva, J. F., Anchorage in Concrete Construction, Ernst & Sohn, Berlin, Germany, 2006, pp. 93-97.
20. Thompson, M. K.; Ziehl, M. J.; Jirsa, J. O.; and Breen, J. E., “CCT Nodes Anchored by Headed Bars—Part 1: Behavior of Nodes,” ACI Structural Journal, V. 102, No. 6, Nov.-Dec. 2005, pp. 808-815.10.14359/14788 ↗
21. Thompson, M. K.; Ledesma, A.; Jirsa, J. O.; and Breen, J. E., “Lap Splices Anchored by Headed Bars,” ACI Structural Journal, V. 103, No. 2, Mar.-Apr. 2006, pp. 271-279.10.14359/15185 ↗
22. Chun, S.-C., “Lap Splice Tests Using High-Strength Headed Bars of 550 MPa (80 ksi) Yield Strength,” ACI Structural Journal, V. 112, No. 6, Nov.-Dec. 2015, pp. 679-688. doi: 10.14359/5168793610.14359/51687936 ↗
23. Nielsen, M. P., Limit Analysis and Concrete Plasticity, second edition, CRC Press LLC, Boca Raton, FL, 1999, 908 pp.
24. Draper, N. R., and Smith, H., Applied Regression Analysis, second edition, Wiley, New York, 1981, 709 pp.
25. Natrella, M. G., Experimental Statistics, National Bureau of Standards Handbook 91, U.S. Department of Commerce, Washington, DC, 1966, pp. 13-15 of Chapter 2.