Phase-field modeling of orientation-dependent crack growth in ductile single crystals with anisotropic elasticity
Source abstract
Abstract
Crack growth in ductile single crystals (DuSCs) is orientation dependent due to the anisotropies of crystal plasticity and elastic tensor. This study develops a phase-field model incorporating both crystal plasticity and crack growth and proposes a general method to decompose the elastic energy into compressive and tensile parts to prevent crack growth under compression in the phase-field description. The phase-field model, in combination with three Euler angles, is employed to simulate orientation-dependent crack growth in DuSCs. The contributions from crystal plasticity and anisotropic elasticity are compared, and the former is found to dominate in the anisotropy of crack growth in copper single crystals. The simulation results demonstrate that crystal orientation strongly affects the heterogeneous distribution of plastic strain and the interaction between plastic strain and crack growth. High-throughput phase-field simulations are performed with exhaustive crystal orientations, and the results are explained based on the anisotropy of the Taylor factor.Graphical abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Numerical methods in engineering · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. O.M. Horst, D. Schmitz, J. Schreuer et al., J. Mater. Sci. 56, 7637 (2021)10.1007/s10853-020-05628-w ↗
2. P. Czaja, R. Chulist, T. Tokarski, T. Czeppe, Y. Chumlyakov, E. Cesari, J. Mater. Sci. 53, 10383 (2018)10.1007/s10853-018-2289-1 ↗
3. P. Li, Y. Huang, K. Wang et al., Int. J. Plast. 150, 103195 (2022)
4. L. Liu, J. Meng, J. Liu, T. Jin, X. Sun, H. Zhang, Mater. Des. 131, 441 (2017)10.1016/j.matdes.2017.06.047 ↗
5. M.W. Savage, J. Eng. Gas Turbine. Power. (2012). https://doi.org/10.1115/1.400412910.1115/1.4004129 ↗
6. S. Paik, B. Dutta, N.N. Kumar, R. Tewari, Theoret. Appl. Fract. Mech. 114, 103019 (2021)10.1016/j.tafmec.2021.103019 ↗
7. M. Segersäll, D. Leidermark, J.J. Moverare, Mater. Sci. Eng. A 623, 68 (2015)10.1016/j.msea.2014.11.026 ↗
8. Y. Lou, C. Zhang, S. Zhang, J.W. Yoon, Int. J. Plast. 158, 103414 (2022)
9. E.-H. Lee, T.B. Stoughton, J.W. Yoon, Int. J. Plast. 99, 120 (2017)10.1016/j.ijplas.2017.08.007 ↗
10. Y. Lou, J.W. Yoon, Int. J. Plast. 101, 125 (2018)10.1016/j.ijplas.2017.10.012 ↗
11. T.L. Anderson, Fracture mechanics: fundamentals and applications (CRC Press, 2017)10.1201/9781315370293 ↗
12. A.S. Khan, S. Huang, Continuum theory of plasticity (John Wiley & Sons, 1995)
13. J. Bishop, R. Hill, Lond. Edinb. Dublin Philos. Mag. J Sci. 42, 1298 (1951)10.1080/14786444108561385 ↗
14. C Reid (1973) Deformation geometry for materials scientists.
15. J. Bishop, R. Hill, Lond. Edinb. Dublin Philos. Mag. J Sci. 42, 414 (1951)10.1080/14786445108561065 ↗
16. G. Potirniche, S. Daniewicz, Eng. Fract. Mech. 70, 1623 (2003)10.1016/S0013-7944(02)00204-7 ↗
17. Y. Guan, B. Chen, J. Zou, T.B. Britton, J. Jiang, F.P. Dunne, Int. J. Plast. 88, 70 (2017)10.1016/j.ijplas.2016.10.001 ↗
18. S. Ganesan, M. Yaghoobi, A. Githens et al., Int. J. Plast. 137, 102917 (2021)10.1016/j.ijplas.2020.102917 ↗
19. C. Liu, P. Shanthraj, M. Diehl et al., Int. J. Plast. 106, 203 (2018)10.1016/j.ijplas.2018.03.009 ↗
20. P. Liu, Z. Wang, Y. Xiao et al., Int. J. Plast. 128, 102670 (2020)
21. V. Tvergaard, A. Needleman, Acta Metall. 32, 157 (1984)10.1016/0001-6160(84)90213-X ↗
22. J. Hure, J. Mech. Phys. Solids 124, 505 (2019)10.1016/j.jmps.2018.10.018 ↗
23. C. Sénac, J.-M. Scherer, J. Hure, T. Helfer, B. Tanguy, Europ. J. Mech. A Sol. 95, 104642 (2022)10.1016/j.euromechsol.2022.104642 ↗
24. C. Ling, J. Besson, S. Forest, B. Tanguy, F. Latourte, E. Bosso, Int. J. Plast. 84, 58 (2016)10.1016/j.ijplas.2016.05.001 ↗
25. J. Paux, L. Morin, R. Brenner, D. Kondo, Europ. J. Mech. A Sol. 51, 1 (2015)10.1016/j.euromechsol.2014.11.004 ↗
26. M. Ambati, T. Gerasimov, L. De Lorenzis, Comput. Mech. 55, 383 (2015)10.1007/s00466-014-1109-y ↗
27. B. Bourdin, G.A. Francfort, J.-J. Marigo, J. Elast. 91, 5 (2008)10.1007/s10659-007-9107-3 ↗
28. V.I. Levitas, Int. J. Plast. 140, 102914 (2021)10.1016/j.ijplas.2020.102914 ↗
29. A. Mesgarnejad, A. Imanian, A. Karma, Theoret. Appl. Fract. Mech. 103, 102282 (2019)10.1016/j.tafmec.2019.102282 ↗
30. V.I. Levitas, H. Jafarzadeh, G.H. Farrahi, M. Javanbakht, Int. J. Plast. 111, 1 (2018)10.1016/j.ijplas.2018.07.005 ↗
31. J.-Y. Wu, V.P. Nguyen, C.T. Nguyen, D. Sutula, S. Sinaie, S.P. Bordas, Adv. Appl. Mech. 53, 1 (2020)10.1016/bs.aams.2019.08.001 ↗
32. P. Li, W. Li, B. Li et al., Eng. Fract. Mech. 289, 109419 (2023)10.1016/j.engfracmech.2023.109419 ↗
33. M.J. Borden, C.V. Verhoosel, M.A. Scott, T.J. Hughes, C.M. Landis, Comput. Methods Appl. Mech. Eng. 217, 77 (2012)10.1016/j.cma.2012.01.008 ↗
34. M. Ambati, T. Gerasimov, L. De Lorenzis, Comput. Mech. 55, 1017 (2015)10.1007/s00466-015-1151-4 ↗
35. B. Yin, M. Kaliske, Comput. Methods Appl. Mech. Eng. 366, 113068 (2020)
36. J. Fang, C. Wu, T. Rabczuk et al., Theoret. Appl. Fract. Mech. 103, 102252 (2019)10.1016/j.tafmec.2019.102252 ↗
37. L. De Lorenzis, A. McBride, B.D. Reddy, GAMM-Mitteilungen 39, 7 (2016)10.1002/gamm.201610002 ↗
38. J. Cheng, X. Tu, S. Ghosh, Comput. Methods Appl. Mech. Eng. 361, 112757 (2020)10.1016/j.cma.2019.112757 ↗
39. F Xue, T-L Cheng, Y Lei, Y-H Wen (2022). npj Computational Materials. 8: 1.10.1038/s41524-022-00700-2 ↗
40. Z. Li, T. Wang, D. Chu, Z. Liu, Y. Cui, Int. J. Plast. 157, 103375 (2022)
41. S. Na, W. Sun, Comput. Methods Appl. Mech. Eng. 338, 657 (2018)10.1016/j.cma.2017.12.022 ↗
42. C. Miehe, M. Hofacker, F. Welschinger, Comput. Methods Appl. Mech. Eng. 199, 2765 (2010)10.1016/j.cma.2010.04.011 ↗
43. T. Hu, J. Guilleminot, J.E. Dolbow, Comput. Methods Appl. Mech. Eng. 368, 113106 (2020)
44. H. Amor, J.-J. Marigo, C. Maurini, J. Mech. Phys. Solids 57, 1209 (2009)10.1016/j.jmps.2009.04.011 ↗
45. G. Lancioni, G. Royer-Carfagni, J. Elast. 95, 1 (2009)10.1007/s10659-009-9189-1 ↗
46. S. Zhou, T. Rabczuk, X. Zhuang, Adv. Eng. Softw. 122, 31 (2018)10.1016/j.advengsoft.2018.03.012 ↗
47. N.P. van Dijk, J.J. Espadas-Escalante, P. Isaksson, Int. J. Solids Struct. 196, 140 (2020)10.1016/j.ijsolstr.2020.04.022 ↗
48. V. Ziaei-Rad, M. Mollaali, T. Nagel, O. Kolditz, K. Yoshioka, J. Mech. Phys. Solid 171, 105143 (2023)10.1016/j.jmps.2022.105143 ↗
49. S. Zhang, W. Jiang, M.R. Tonks, Comput. Method Appl. Mech. Eng. 358, 112643 (2020)10.1016/j.cma.2019.112643 ↗
50. T. Takeuchi, Transac. Jpn. Inst. Metal. 16, 629 (1975)10.2320/matertrans1960.16.629 ↗
51. J-L STRUDEL (1996) Physical metallurgyElsevier,
52. S. Ghorbanpour, M. Zecevic, A. Kumar et al., Int. J. Plast. 99, 162 (2017)10.1016/j.ijplas.2017.09.006 ↗
53. S. Ghorbanpour, M.E. Alam, N.C. Ferreri et al., Int. J. Plast. 125, 63 (2020)10.1016/j.ijplas.2019.09.002 ↗
54. M. Ambati, R. Kruse, L. De Lorenzis, Comput. Mech. 57, 149 (2016)10.1007/s00466-015-1225-3 ↗
55. F. Freddi, G. Royer-Carfagni, J. Mech. Phys. Solids 58, 1154 (2010)10.1016/j.jmps.2010.02.010 ↗
56. F. Xue, Y. Lei, T.-L. Cheng et al., Int. J. Hydrogen Energy 48, 9845 (2023)10.1016/j.ijhydene.2022.12.042 ↗
57. T.-L. Cheng, Y.-H. Wen, J.A. Hawk, Int. J. Plast. 96, 242 (2017)10.1016/j.ijplas.2017.05.006 ↗
58. L. De Lorenzis, C. Maurini, Int. J. Fract. 237, 61 (2022)10.1007/s10704-021-00555-6 ↗
59. S. Zhang, W. Jiang, M.R. Tonks, Mater. Theory 6, 6 (2022)10.1186/s41313-021-00037-1 ↗
60. R. Tran, Z. Xu, B. Radhakrishnan et al., Scientif. Data 3, 1 (2016)
61. T.T. Nguyen, J. Réthoré, M.-C. Baietto, Europ. J. Mech. A Sol. 65, 279 (2017)10.1016/j.euromechsol.2017.05.002 ↗
62. S. Teichtmeister, D. Kienle, F. Aldakheel, M.-A. Keip, Int. J. Non-Linear Mech. 97, 1 (2017)10.1016/j.ijnonlinmec.2017.06.018 ↗
63. T.-L. Cheng, Y.-H. Wen, J.A. Hawk, Int. J. Plast. 114, 106 (2019)10.1016/j.ijplas.2018.10.012 ↗
64. H. Chowdhury, K. Naumenko, H. Altenbach, Int. J. Mech. Sci. 146, 486 (2018)10.1016/j.ijmecsci.2017.06.019 ↗
65. Y.U. Wang, Y.M. Jin, A.G. Khachaturyan, J. Appl. Phys. 92, 1351 (2002)10.1063/1.1492859 ↗
66. J.F. Nye, Physical properties of crystals: their representation by tensors and matrices (Oxford University Press, 1985)
67. R.A. Lebensohn, A.K. Kanjarla, P. Eisenlohr, Int. J. Plast. 32, 59 (2012)10.1016/j.ijplas.2011.12.005 ↗
68. K. Pham, H. Amor, J.-J. Marigo, C. Maurini, Int. J. Damage Mech 20, 618 (2011)10.1177/1056789510386852 ↗