Aluminum phosphate-based coatings: a novel approach to next generation of protective and thermal barrier coatings
Source abstract
Abstract
In the present study, a novel protective thermal barrier coating was developed. Amorphous aluminum phosphate powder was synthesized by sol–gel process and applied on Inconel 625 by air plasma spray (APS). Thermal conductivity of the compound was determined using laser flash analysis (LFA). The adhesion strength of the coating was evaluated by tensile test according to the ASTM-C633 standard. Hot corrosion behavior of the coatings was examined in Na2SO4–10 wt% NaCl molten salt at 1100 °C for 100 h. Thermal conductivity of the compound was obtained to be 1.1–2.2 W m−1K−1at 20–1000 °C which was considerably a low value compared to conventional TBC (8YSZ). The adhesion strength of the coating was obtained to be 40.8 ± 2 MPa which would be a significant value considering the applying method. The parabolic rate constant (Kp) for the coated sample was 23 times lower than that of the bare one after 100 h of exposure time.Graphical abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · High-Temperature Coating Behaviors · Flame retardant materials and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. J.G. Thakare, C. Pandey, M.M. Mahapatra, R.S. Mulik, Thermal barrier coatings—a state of the art review. Met. Mater. Int. 27, 1947 (2021)10.1007/s12540-020-00705-w ↗
2. X. Ren, S. Guo, M. Zhao, W. Pan, Thermal conductivity and mechanical properties of YSZ/LaPO4 composites. J. Mater. Sci. 49(5), 2243 (2014)10.1007/s10853-013-7919-z ↗
3. W. Fan, Z.Z. Wang, Y. Bai, J.W. Che, R.J. Wang, F. Ma, W.Z. Tao, G.Y. Liang, Improved properties of scandia and yttria co-doped zirconia as a potential thermal barrier material for high temperature applications. J. Eur. Ceram. Soc. 38(13), 4502 (2018)10.1016/j.jeurceramsoc.2018.06.002 ↗
4. F. Yang, X. Zhao, P. Xiao, Thermal conductivities of YSZ/Al2O3 composites. J. Eur. Ceram. Soc. 30(15), 3111 (2010)10.1016/j.jeurceramsoc.2010.07.007 ↗
5. A.Z.A. Azhar, M.M. Ratnam, Z.A. Ahmad, Effect of Al2O3/YSZ microstructures on wear and mechanical properties of cutting inserts. J. Alloys Compd. 478(1), 608 (2009)10.1016/j.jallcom.2008.11.156 ↗
6. X. Luo, Z. Ning, L. Zhang, R. Lin, H. He, J. Yang, Y. Yang, J. Liao, N. Liu, Influence of Al2O3 overlay on corrosion resistance of plasma sprayed yttria-stabilized zirconia coating in NaCl-KCl molten salt. Surf. Coat. Technol. 361, 432 (2019)10.1016/j.surfcoat.2019.01.054 ↗
7. J. Yao, Y. He, D. Wang, Influence of Al2O3/YSZ micro-laminated coatings on high temperature oxidation and spallation resistance of MCrAlY alloys. J. Phys. Conf. Ser. 419(1), 012019 (2013)10.1088/1742-6596/419/1/012019 ↗
8. P. Ramaswamy, S. Seetharamu, K.J. Rao, K.B.R. Varma, Thermal shock characteristics of plasma sprayed mullite coatings. J. Therm. Spray Technol. 7(4), 497 (1998)10.1361/105996398770350710 ↗
9. A. Dragomirescu, N. Constantin, A. Ştefan, V. Manoliu, R. Truşcă, Advanced study of thermal behaviour of CSZ comparing with the classic YSZ coating. IOP Conf. Ser.: Mater. Sci. Eng. 163(1), 012040 (2017)10.1088/1757-899X/163/1/012040 ↗
10. W. Xiao, Q. Guo, E.G. Wang, Transformation of CeO2(111) to Ce2O3(0001) films. Chem. Phys. Lett. 368(5), 527 (2003)10.1016/S0009-2614(02)01889-4 ↗
11. R.S. Pavlik Jr., H.J. Holland, E.A. Payzant, Thermal decomposition of zircon refractories. J. Am. Ceram. Soc. 84, 2930 (2001)10.1111/j.1151-2916.2001.tb01117.x ↗
12. X. Cao, Application of rare earths in thermal barrier coating materials. J. Mater. Sci. Technol. 23(01), 15 (2007)10.1179/174328407X154392 ↗
13. S. Roy, S.R. Reddy, P. Sindhuja, D. Das, V.V. Bhauprasad, AlPO4-C composite coating on Ni-based super alloy substrates for high emissivity applications : experimentation on dip coating and spray coating. Def. Sci. J. 66(4), 425 (2016)10.14429/dsj.66.10220 ↗
14. F.S. Sayyedan, M.H. Enayati, M. Hashempour, A. Vicenzo, M. Bestetti, Synthesis and characterization of sol-gel derived non-stoichiometric aluminum phosphate coating. Surf. Coat. Technol. 351, 128 (2018)10.1016/j.surfcoat.2018.07.086 ↗
15. H. Xu, H. Guo, S. Gong, Thermal Barrier Coatings, in Developments in High Temperature Corrosion and Protection of Materials (Elsevier, Amsterdam, 2008), p.47610.1533/9781845694258.2.476 ↗
16. Z. Yao, X. Li, H. Wei, Q. Xia, Y. Wang, D. Li, Z. Jiang, Black ceramic coatings on Ti alloy with enhanced high absorptivity and high emissivity by plasma electrolytic oxidation. Int. J. Appl. Ceram. Technol. 16, 994 (2019)10.1111/ijac.13198 ↗
17. Y. He, Heat capacity, thermal conductivity, and thermal expansion of barium titanate-based ceramics. Thermochim. Acta 419(1), 135 (2004)10.1016/j.tca.2004.02.008 ↗
18. H. Wen, J.-H. Lu, Y. Xiao, J. Deng, Temperature dependence of thermal conductivity, diffusion and specific heat capacity for coal and rocks from coalfield. Thermochim. Acta 619, 41 (2015)10.1016/j.tca.2015.09.018 ↗
19. J. Chen, Y. Long, X. Xiong, P. Xiao, Microstructure and thermal conductivity of carbon/carbon composites made with different kinds of carbon fibers. J. Cent. South Univ. 19, 1780 (2012)10.1007/s11771-012-1207-y ↗
20. H. Zhao, F. Yu, T.D. Bennett, H.N.G. Wadley, Morphology and thermal conductivity of yttria-stabilized zirconia coatings. Acta Mater. 54(19), 5195 (2006)10.1016/j.actamat.2006.06.028 ↗
21. J.G. Odhiambo, W. Li, Y. Zhao, C. Li, Porosity and its significance in plasma-sprayed coatings. Coatings 9(7), 460 (2019)10.3390/coatings9070460 ↗
22. S.T. Aruna, B. Arul Paligan, N. Balaji, V. Praveen Kumar, Properties of plasma sprayed yttria stabilized zirconia thermal barrier coating prepared from co-precipitation synthesized powder. Ceram. Int. 40(7), 11157 (2014)10.1016/j.ceramint.2014.03.143 ↗
23. S.A. Sadeghi-Fadaki, K. Zangeneh-Madar, Z. Valefi, The adhesion strength and indentation toughness of plasma-sprayed yttria stabilized zirconia coatings. Surf. Coat. Technol. 204(14), 2136 (2010)10.1016/j.surfcoat.2009.11.035 ↗
24. R. Ghasemi, H. Vakilifard, Plasma-sprayed nanostructured YSZ thermal barrier coatings: thermal insulation capability and adhesion strength. Ceram. Int. 43(12), 8556 (2017)10.1016/j.ceramint.2017.03.074 ↗
25. A.M. Khoddami, A. Sabour, S.M.M. Hadavi, Microstructure formation in thermally-sprayed duplex and functionally graded NiCrAlY/Yttria-Stabilized Zirconia coatings. Surf. Coat. Technol. 201(12), 6019 (2007)10.1016/j.surfcoat.2006.11.020 ↗
26. A. Nusair Khan, J. Lu, H. Liao, Effect of residual stresses on air plasma sprayed thermal barrier coatings. Surf. Coat. Technol. 168(2), 291 (2003)10.1016/S0257-8972(03)00207-X ↗
27. A.C. Karaoglanli, H. Dikici, Y. Kucuk, Effects of heat treatment on adhesion strength of thermal barrier coating systems. Eng. Fail. Anal. 32, 16 (2013)10.1016/j.engfailanal.2013.02.029 ↗
28. Abhinav, H.K. Kustagi, A.R. Shankar, Adhesion strength of plasma sprayed coatings—a review, in Intelligent Manufacturing and Energy Sustainability. ed. by A.N.R. Reddy, D. Marla, M. Simic, M.N. Favorskaya, S.C. Satapathy (Springer, Singapore, 2020), p.7710.1007/978-981-15-1616-0_8 ↗
29. : Mechanisms of oxidation, in Introduction to the High Temperature Oxidation of Metals, edited by F. S. Pettit, G. H. Meier and N. Birks (Cambridge University Press, Cambridge, 2006), p. 39.
30. P.A. Selim, O. Dervis, O. Mecit, O. Yasin, D.K. Mert, G. Turgut, K.A. Cahit, Formation and growth behavior of TGO layer in TBCs with HVOF sprayed NiCr bond coat. Emerg. Mater. Res. 9, 451 (2020)
31. J. Song, H. Qi, D. Shi, X. Yang, S. Li, Effect of non-uniform growth of TGO layer on cracking behaviors in thermal barrier coatings: a numerical study. Surf. Coat. Technol. 370, 113 (2019)10.1016/j.surfcoat.2019.04.069 ↗