Effects of annealing on bonding strengthening mechanism of Ti/Al composite sheets by twin-roll casting with roller vibration
Source abstract
Abstract
An innovative twin-roll casting process that produces the comprehensive effect of “energy field agitation + dendrite breaking + asymmetric rolling” by vibration of the roller was used for preparation of Ti/Al composite sheets. The increase of meshing layer thickness from 3.1 μm to 4.5 μm under the effect of vibration of the roller enhances the bonding strength from 14.9 N/mm to 27.0 N/mm. The increase of intermetallic layer thickness from 4.5 μm to 7.75 μm under the effect of “vibration twin-roll casting + annealing” enhances the bonding strength from 27.0 N/mm to 34.0 N/mm, and annealing transforms the mechanical meshing “direct bonding” of the “two phases” into the intermetallic layer “transition bonding” of the “three phases,” which realizes the transformation of laminated metal composite mode, and the composite mode is based on the bonding of the intermetallic compound layers with reticulation connection structure that is stronger than mechanical engagement.Graphical abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. R.H. Lu, Y.T. Liu, M. Yan, J.N. Sun, L.F. Shen, H.G. Huang, Theoretical, experimental and numerical studies on the deep drawing behavior of Ti/Al composite sheets with different thickness ratios fabricated by roll bonding. J. Mater. Process Tech. 297, 117246 (2021). https://doi.org/10.1016/j.jmatprotec.2021.11724610.1016/j.jmatprotec.2021.117246 ↗
2. M. Cao, C.J. Wang, K.K. Deng, K.B. Nie, W. Liang, Y.H. Wu, Effect of interface on mechanical properties and formability of Ti/Al/Ti laminated composites. J. Mater. Res. Technol. 14, 1655–1669 (2021). https://doi.org/10.1016/j.jmrt.2021.07.02110.1016/j.jmrt.2021.07.021 ↗
3. K.S. Lee, S.J. Bae, H.W. Lee, S.H. Kang, Interface-correlated bonding properties for a roll-bonded Ti/Al 2-ply sheet. Mater. Charact. 134, 163–171 (2017). https://doi.org/10.1016/j.matchar.2017.10.00910.1016/j.matchar.2017.10.009 ↗
4. M. Ma, P. Huo, W.C. Liu, G.J. Wang, D.M. Wang, Microstructure and mechanical properties of Al/Ti/Al laminated composites prepared by roll bonding. Mat. Sci. Eng. A-Struct. 636, 301–310 (2015). https://doi.org/10.1016/j.msea.2015.03.08610.1016/j.msea.2015.03.086 ↗
5. S.Y. Yang, J.W. Bao, Microstructure and properties of 5083 Al/1060 Al/AZ31 composite plate fabricated by explosive welding. J. Mater. Eng. Perform. 27(3), 1177–1184 (2018). https://doi.org/10.1007/s11665-018-3174-410.1007/s11665-018-3174-4 ↗
6. M. Tayyebi, M. Alizadeh, A novel two-step method for producing Al/Cu functionally graded metal matrix composite. J. Alloys Compd. 911, 165078 (2022). https://doi.org/10.1016/j.jallcom.2022.16507810.1016/j.jallcom.2022.165078 ↗
7. D.W. Kim, D.H. Lee, J.S. Kim, S.S. Sohn, H.S. Kim, S. Lee, Novel twin-roll-cast Ti/Al clad sheets with excellent tensile properties. Sci. Rep-UK 7(1), 8110 (2017). https://doi.org/10.1038/s41598-017-08681-910.1038/s41598-017-08681-9 ↗
8. M. Ma, P. Huo, W.C. Liu, Microstructure and mechanical properties of Ti/Al/Ti laminated composites prepared by hot rolling. J. Mater. Eng. Perform. 26(7), 3569–3578 (2017). https://doi.org/10.1007/s11665-017-2769-510.1007/s11665-017-2769-5 ↗
9. P.D. Huo, F. Li, Y. Wang, X.M. Xiao, Formability and interface structure of Al/Mg/Al composite sheet rolled by hard-plate rolling (HPR). Int. J. Adv. Manuf. Tech. 118, 55–65 (2022). https://doi.org/10.1007/s00170-021-07178-010.1007/s00170-021-07178-0 ↗
10. Q. Wang, X.J. Li, B.M. Shi, Y. Wu, Experimental and numerical studies on preparation of thin AZ31B/AA5052 composite plates using improved explosive welding technique. Metals 10(8), 1023 (2020). https://doi.org/10.3390/met1008102310.3390/met10081023 ↗
11. H.L. Liang, N. Luo, Y.L. Chen, J.X. Wang, G.J. Wang, C. Zhai, X.J. Li, Interface microstructure morphology and formation evolution mechanism of Al-1060/Cu-T2 composites fabricated by explosive welding method. Compos. Interface 29(5), 465–485 (2022). https://doi.org/10.1080/09276440.2021.197188310.1080/09276440.2021.1971883 ↗
12. Y.P. Wang, M. Tayyebi, A. Assari, Fracture toughness, wear, and microstructure properties of aluminum/titanium/steel multi-laminated composites produced by cross-accumulative roll-bonding process. Arch. Civ. Mech. Eng. 22, 49 (2022). https://doi.org/10.1007/s43452-021-00355-810.1007/s43452-021-00355-8 ↗
13. Y.W. Wang, P.F. Huang, S.F. Liu, M. Tayyebi, M. Tayebi, Microstructural evolution, shielding effectiveness, and the ballistic response of Mg/Al7075/B4C/Pb composite produced by combination of coating and severe plastic deformation (SPD) processes. J. Manuf. Process. 84, 977–985 (2022). https://doi.org/10.1016/j.jmapro.2022.10.06210.1016/j.jmapro.2022.10.062 ↗
14. J.P. Huang, M. Tayyebi, A.H. Assari, Effect of SiC particle size and severe deformation on mechanical properties and thermal conductivity of Cu/Al/Ni/SiC composite fabricated by ARB process. J. Manuf. Process. 68, 57–68 (2021). https://doi.org/10.1016/j.jmapro.2021.07.01710.1016/j.jmapro.2021.07.017 ↗
15. G. Chen, J.T. Li, G.M. Xu, Bonding process and interfacial reaction in horizontal twin-roll casting of steel/aluminum clad sheet. J. Mater. Process. Tech. 246, 1–12 (2017). https://doi.org/10.1016/j.jmatprotec.2017.03.00310.1016/j.jmatprotec.2017.03.003 ↗
16. P. Chen, H.G. Huang, C. Ji, X. Zhang, Z.H. Sun, Bonding strength of Invar/Cu clad strips fabricated by twin-roll casting process. T. Nonferr. Metal. Soc. 28(12), 2460–2469 (2018). https://doi.org/10.1016/S1003-6326(18)64892-710.1016/S1003-6326(18)64892-7 ↗
17. R.R. Xu, N.N. Liang, L.M. Zhuang, D.J. Wei, Y.H. Zhao, Microstructure and mechanical behaviors of Al/Cu laminated composites fabricated by accumulative roll bonding and intermediate annealing. Mat. Sci. Eng. A-Struct. 832, 142510 (2022). https://doi.org/10.1016/j.msea.2021.14251010.1016/j.msea.2021.142510 ↗
18. H.T. Gao, H. Gu, S. Wang, Y.N. Xuan, H.L. Yu, Effect of annealing temperature on the interfacial microstructure and bonding strength of cu/al clad sheets with a stainless steel interlayer. Materials 15(6), 2119 (2022). https://doi.org/10.3390/ma1506211910.3390/ma15062119 ↗
19. H.R. Lin, Y.Z. Tian, S.J. Sun, Z.F. Zhang, Microstructural evolution and mechanical properties of laminated cual composites processed by accumulative roll-bonding and annealing. Acta Metall. Sin-Engl. 34, 925–931 (2021). https://doi.org/10.1007/s40195-020-01179-w10.1007/s40195-020-01179-w ↗
20. S.N. Lyu, L. Zheng, D.X. Chang, B.Y. Yu, Improving the stamping formability of rolled titanium/iron composite sheets by annealing. Mat. Sci. Eng. A-Struct. 845, 143241 (2022). https://doi.org/10.1016/j.msea.2022.14324110.1016/j.msea.2022.143241 ↗
21. M.J. Kim, K.S. Lee, S.H. Han, S.I. Hong, Interface strengthening of a roll-bonded two-ply Al/Cu sheet by short annealing. Mater. Charact. 174, 111021 (2021). https://doi.org/10.1016/j.matchar.2021.11102110.1016/j.matchar.2021.111021 ↗
22. J.J. Xu, J.Y. Fu, S.J. Li, G.M. Xu, Y. Li, J.D. Wang, Effect of annealing and cold rolling on interface microstructure and properties of Ti/Al/Cu clad sheet fabricated by horizontal twin-roll casting. J. Mater. Res. Technol. 16, 530–543 (2022). https://doi.org/10.1016/j.jmrt.2021.12.01710.1016/j.jmrt.2021.12.017 ↗
23. M. Tayyebi, M. Adhami, A. Karimi, D. Rahmatabadi, M. Alizadeh, R. Hashemi, Effects of strain accumulation and annealing on interfacial microstructure and grain structure (Mg and Al3Mg2 layers) of Al/Cu/Mg multilayered composite fabricated by ARB process. J. Mater. Res. Technol. 14, 392–406 (2021). https://doi.org/10.1016/j.jmrt.2021.06.03210.1016/j.jmrt.2021.06.032 ↗
24. Q. Ye, X.J. Li, M. Tayyebi, A.H. Assari, A. Polkowska, S. Lech, W. Polkowski, M. Tayebi, Effect of heat treatment parameters on microstructure evolution, tensile strength, wear resistance, and fracture behavior of Ni–Ti multilayered composites produced by cross-accumulative roll bonding. Arch. Civ. Mech. Eng. 23, 27 (2023). https://doi.org/10.1007/s43452-022-00557-810.1007/s43452-022-00557-8 ↗
25. H.G. Huang, P. Chen, C. Ji, Solid-liquid cast-rolling bonding (SLCRB) and annealing of Ti/Al cladding strip. Mater. Design 118, 233–244 (2017). https://doi.org/10.1016/j.matdes.2017.01.04210.1016/j.matdes.2017.01.042 ↗
26. B.H. Xing, T. Huang, L.J. Xu, N. Xiang, X.W. Chen, F.X. Chen, Effect of heat treatment process on the microstructure of the interface of Ti/Al laminated composite. Compos. Interface 7(29), 749–764 (2022). https://doi.org/10.1080/09276440.2021.201241010.1080/09276440.2021.2012410 ↗
27. M.F. Liu, C.S. Zhang, Z.J. Meng, G.Q. Zhao, L. Chen, Atomic diffusion mechanism and interface nanomechanics in the Al/Ti composite structures. Compos. Part B-Eng. 230, 109507 (2022). https://doi.org/10.1016/j.compositesb.2021.10950710.1016/j.compositesb.2021.109507 ↗