Microstructural and tribological properties of laser-treated cold-sprayed titanium/baghdadite deposits
Source abstract
Abstract
This work presents the laser-remelting effect on microstructure, microhardness, and wear properties of the baghdadite reinforced cold-sprayed titanium composite coatings for orthopedic implant applications. The obtained results of laser-remelted coatings are compared to the as-sprayed coatings. The process parameters for laser treatment of cold-sprayed coatings are verified experimentally using scanning electron microscopy (SEM) and a thermal imaging camera. The laser-treated coatings are analyzed with SEM and energy-dispersive spectroscopy (EDS). Furthermore, sliding wear analysis of the laser-treated and as-sprayed coatings is done in Hank’s solution. The results show that laser-remelting helped in improving the density, microhardness, and wear resistance of the coatings. Post-wear analysis revealed that the main wear mechanism for coating wear is three-body abrasion and adhesion.Graphical abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. S. Yin, X. Suo, J. Su, Z. Guo, H. Liao, X. Wang, Effects of substrate hardness and spray angle on the deposition behavior of cold-sprayed Ti particles. J. Therm. Spray Technol. 23, 76–83 (2014). https://doi.org/10.1007/s11666-013-0039-010.1007/s11666-013-0039-0 ↗
2. S.S. Sidhu, H. Singh, M.A.H. Gepreel, A review on alloy design, biological response, and strengthening of β-titanium alloys as biomaterials. Mater. Sci. Eng. C (2021). https://doi.org/10.1016/j.msec.2020.11166110.1016/j.msec.2020.111661 ↗
3. H.R. Wang, B.R. Hou, J. Wang, Q. Wang, W.Y. Li, Effect of process conditions on microstructure and corrosion resistance of cold-sprayed Ti coatings. J. Therm. Spray Technol. 17, 736–741 (2008). https://doi.org/10.1007/s11666-008-9256-310.1007/s11666-008-9256-3 ↗
4. A.W.Y. Tan, W. Sun, A. Bhowmik, J.Y. Lek, X. Song, W. Zhai, H. Zheng, F. Li, I. Marinescu, Z. Dong, E. Liu, Effect of substrate surface roughness on microstructure and mechanical properties of cold-sprayed Ti6Al4V coatings on Ti6Al4V substrates. J. Therm. Spray Technol. 28, 1959–1973 (2019). https://doi.org/10.1007/s11666-019-00926-510.1007/s11666-019-00926-5 ↗
5. T.P. Singh, H. Singh, H. Singh, Characterization of thermal sprayed hydroxyapatite coatings on some biomedical implant materials. J. Appl. Biomater. Funct. Mater. 12, 48–56 (2014). https://doi.org/10.5301/JABFM.2012.926710.5301/JABFM.2012.9267 ↗
6. H.L. Yao, C. Yang, Q. Yang, X.Z. Hu, M.X. Zhang, X.B. Bai, H.T. Wang, Q.Y. Chen, Structure, mechanical and bioactive properties of nanostructured hydroxyapatite/titania composites prepared by microwave sintering. Mater. Chem. Phys. (2020). https://doi.org/10.1016/j.matchemphys.2019.12234010.1016/j.matchemphys.2019.122340 ↗
7. D.Q. Pham, C.C. Berndt, U. Gbureck, H. Zreiqat, V.K. Truong, A.S.M. Ang, Mechanical and chemical properties of Baghdadite coatings manufactured by atmospheric plasma spraying. Surf. Coat. Technol. 378, 124945 (2019). https://doi.org/10.1016/j.surfcoat.2019.12494510.1016/j.surfcoat.2019.124945 ↗
8. A. Kumar, H. Singh, R. Kant, N. Rasool, Development of cold sprayed titanium/baghdadite composite coating for bio-implant applications. J. Therm. Spray Technol. (2021). https://doi.org/10.1007/s11666-021-01269-w10.1007/s11666-021-01269-w ↗
9. L. Sun, Thermal spray coatings on orthopedic devices: when and how the FDA reviews your coatings. J. Therm. Spray Technol. 27, 1280–1290 (2018). https://doi.org/10.1007/s11666-018-0759-210.1007/s11666-018-0759-2 ↗
10. A.S. Kang, G. Singh, V. Chawla, Some problems associated with thermal sprayed Ha coatings: a review. Int. J. Surf. Eng. Mater. Technol. 3, 10–14 (2013)
11. V.K. Champagne, The cold spray materials deposition process, 2007.https://doi.org/10.1533/978184569378710.1533/9781845693787 ↗
12. H. Assadi, F. Gärtner, T. Stoltenhoff, H. Kreye, Bonding mechanism in cold gas spraying. Acta Mater. 51, 4379–4394 (2003). https://doi.org/10.1016/S1359-6454(03)00274-X10.1016/S1359-6454(03)00274-X ↗
13. M. Hassani-Gangaraj, D. Veysset, V.K. Champagne, K.A. Nelson, C.A. Schuh, Adiabatic shear instability is not necessary for adhesion in cold spray. Acta Mater. 158, 430–439 (2018). https://doi.org/10.1016/j.actamat.2018.07.06510.1016/j.actamat.2018.07.065 ↗
14. W. Li, C. Cao, S. Yin, Solid-state cold spraying of Ti and its alloys: a literature review. Prog. Mater. Sci. 110, 100633 (2020). https://doi.org/10.1016/j.pmatsci.2019.10063310.1016/j.pmatsci.2019.100633 ↗
15. U. Prisco, A. Squillace, A. Astarita, L. Carrino, Morphology of titanium coatings deposited through single pass cold spraying. Mater. Manuf. Process. 33, 123–129 (2018). https://doi.org/10.1080/10426914.2016.119803510.1080/10426914.2016.1198035 ↗
16. A.W.Y. Tan, W. Sun, Y.P. Phang, M. Dai, I. Marinescu, Z. Dong, E. Liu, Effects of traverse scanning speed of spray nozzle on the microstructure and mechanical properties of cold-sprayed Ti6Al4V coatings. J. Therm. Spray Technol. 26, 1484–1497 (2017). https://doi.org/10.1007/s11666-017-0619-510.1007/s11666-017-0619-5 ↗
17. T. Goyal, R.S. Walia, T.S. Sidhu, Effect of parameters on coating density for cold spray process. Mater. Manuf. Process. 27, 193–200 (2012). https://doi.org/10.1080/10426914.2011.56690610.1080/10426914.2011.566906 ↗
18. R. Singh, M. Martin, N.B. Dahotre, Influence of laser surface modification on corrosion behavior of stainless steel 316L and Ti–6Al–4V in simulated biofluid. Surf. Eng. 21, 297–306 (2005). https://doi.org/10.1179/174329405X5532010.1179/174329405X55320 ↗
19. E.O. Olakanmi, Optimization of the quality characteristics of laser-assisted cold-sprayed (LACS) aluminum coatings with Taguchi design of experiments (DOE). Mater. Manuf. Process. 31, 1490–1499 (2016). https://doi.org/10.1080/10426914.2014.98430610.1080/10426914.2014.984306 ↗
20. J. Zhang, D. Kong, Effect of laser remelting on microstructure and immersion corrosion of cold-sprayed aluminum coating on S355 structural steel. Opt. Laser Technol. 106, 348–356 (2018). https://doi.org/10.1016/j.optlastec.2018.04.02610.1016/j.optlastec.2018.04.026 ↗
21. A. Sova, S. Grigoriev, A. Okunkova, I. Smurov, Cold spray deposition of 316L stainless steel coatings on aluminium surface with following laser post-treatment. Surf. Coat. Technol. 235, 283–289 (2013). https://doi.org/10.1016/j.surfcoat.2013.07.05210.1016/j.surfcoat.2013.07.052 ↗
22. P. Poza, C.J. Múnez, M.A. Garrido-Maneiro, S. Vezzù, S. Rech, A. Trentin, Mechanical properties of Inconel 625 cold-sprayed coatings after laser remelting. Depth sensing indentation analysis. Surf. Coat. Technol. 243, 51–57 (2014). https://doi.org/10.1016/j.surfcoat.2012.03.01810.1016/j.surfcoat.2012.03.018 ↗
23. F. Rubino, A. Astarita, P. Carlone, S. Genna, C. Leone, F. MemolaCapece Minutolo, A. Squillace, Selective laser post-treatment on titanium cold spray coatings. Mater. Manuf. Process. 31, 1500–1506 (2016). https://doi.org/10.1080/10426914.2015.103791210.1080/10426914.2015.1037912 ↗
24. Z. Jing, K. Dejun, Effect of laser remelting on friction-wear behaviors of cold sprayed Al coatings in 3.5% NaCl solution. Materials (2018). https://doi.org/10.3390/ma1102028310.3390/ma11020283 ↗
25. V.N.V. Munagala, V. Akinyi, P. Vo, R.R. Chromik, Influence of powder morphology and microstructure on the cold spray and mechanical properties of Ti6Al4V coatings. J. Therm. Spray Technol. 27, 827–842 (2018)10.1007/s11666-018-0729-8 ↗
26. A. Kumar, R. Kant, H. Singh, Tribological behavior of cold-sprayed titanium/baghdadite composite coatings in dry and simulated body fluid environments. Surf. Coat. Technol. 425, 127727 (2021). https://doi.org/10.1016/j.surfcoat.2021.12772710.1016/j.surfcoat.2021.127727 ↗
27. C.L. Li, C.S. Wang, P.L. Narayana, J.K. Hong, S.W. Choi, J.H. Kim, S.W. Lee, C.H. Park, J.T. Yeom, Q. Mei, Formation of equiaxed grains in selective laser melted pure titanium during annealing. J. Mater. Res. Technol. 11, 301–311 (2021). https://doi.org/10.1016/j.jmrt.2021.01.00810.1016/j.jmrt.2021.01.008 ↗
28. J. Shen, B. Chen, X. Ye, H. Imai, J. Umeda, K. Kondoh, The formation of bimodal multilayered grain structure and its effect on the mechanical properties of powder metallurgy pure titanium. Mater. Des. 116, 99–108 (2017). https://doi.org/10.1016/j.matdes.2016.12.00410.1016/j.matdes.2016.12.004 ↗
29. X. Qiu, N.H. Ul Tariq, J. Qiang Wang, J. Rong Tang, L. Gyansah, Z. Po Zhao, T. Ying Xiong, Microstructure, microhardness and tribological behavior of Al2O3 reinforced A380 aluminum alloy composite coatings prepared by cold spray technique. Surf. Coat. Technol. 350, 391–400 (2018). https://doi.org/10.1016/j.surfcoat.2018.07.03910.1016/j.surfcoat.2018.07.039 ↗
30. D. Seo, M. Sayar, K. Ogawa, SiO2 and MoSi2 formation on Inconel 625 surface via SiC coating deposited by cold spray. Surf. Coat. Technol. 206, 2851–2858 (2012). https://doi.org/10.1016/j.surfcoat.2011.12.01010.1016/j.surfcoat.2011.12.010 ↗
31. E.S. Yoon, R.A. Singh, H.J. Oh, H. Kong, The effect of contact area on nano/micro-scale friction. Wear 259, 1424–1431 (2005). https://doi.org/10.1016/j.wear.2005.01.03310.1016/j.wear.2005.01.033 ↗
32. J. Archard, Contact and rubbing of flat surfaces. J. Appl. Phys. 24, 981–988 (1953)10.1063/1.1721448 ↗
33. Z. Lisowski, T.A. Stolarski, A modified theory of adhesive wear in lubricated contacts. Wear 68, 333–345 (1981). https://doi.org/10.1016/0043-1648(81)90180-010.1016/0043-1648(81)90180-0 ↗
34. L. Palodhi, B. Das, H. Singh, Effect of particle size and morphology on critical velocity and deformation behavior in cold spraying. J. Mater. Eng. Perform. 30, 8276–8288 (2021). https://doi.org/10.1007/s11665-021-05997-610.1007/s11665-021-05997-6 ↗
35. S.T. Method, Standard test method for wear testing with a pin-on-disk apparatus 1. Wear 05, 1–5 (2011). https://doi.org/10.1520/G0099-05R10.210.1520/G0099-05R10.2 ↗