Ductility and Performance Assessment of Glass Fiber Reinforced Polymer-Reinforced Concrete Deep Beams Incorporating Cementitious Composites Reinforced with Basalt Fiber Pellets

1. Abed, F., and Alhafiz, A. R., 2019, “Effect of Basalt Fibers on the Flexural Behavior of Concrete Beams Reinforced with BFRP Bars,” Composite Structures, V. 215, pp. 23-34. doi: 10.1016/j.compstruct.2019.02.05010.1016/j.compstruct.2019.02.050 ↗

2. Joint ACI-ASCE Committee 445, 1998, “Recent Approaches to Shear Design of Structural Concrete,” Journal of Structural Engineering, ASCE, V. 124, No. 12, pp. 1375-1417. doi: 10.1061/(ASCE)0733-9445(1998)124:12(1375)10.1061/(ASCE)0733-9445(1998)124:12(1375) ↗

3. Joint ASCE-ACI Committee 426, 1973, “Shear and Diagonal Tension,” Journal of the Structural Division, V. 6, pp. 1091-1187.

4. ACI Committee 318, 2019, “Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318R-19),” American Concrete Institute, Farmington Hills, MI, 624 pp.

5. ACI Committee 440, 2015, “Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars (ACI 440.1R-15),” American Concrete Institute, Farmington Hills, MI.

6. Alsayed, S., and Alhozaimy, A., 1999, “Ductility of Concrete Beams Reinforced with FRP Bars and Steel Fibers,” Journal of Composite Materials, V. 33, No. 19, pp. 1792-1806. doi: 10.1177/00219983990330190210.1177/002199839903301902 ↗

7. Arslan, M. E., 2016, “Effects of Basalt and Glass Chopped Fibers Addition on Fracture Energy and Mechanical Properties of Ordinary Concrete: CMOD Measurement,” Construction and Building Materials, V. 114, pp. 383-391. doi: 10.1016/j.conbuildmat.2016.03.17610.1016/j.conbuildmat.2016.03.176 ↗

8. ASTM C128-15, 2015, “Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate,” ASTM International, West Conshohocken, PA, 6 pp.

9. ASTM C136/C136M-14, 2014, “Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates,” ASTM International, West Conshohocken, PA, 5 pp.

10. ASTM C143/C143M-20, 2020, “Standard Test Method for Slump of Hydraulic-Cement Concrete,” ASTM International, West Conshohocken, PA, 2 pp.

11. ASTM C230/C230M-14, 2014, “Standard Specification for Flow Table for Use in Tests of Hydraulic Cement,” ASTM International, West Conshohocken, PA, 7 pp.

12. ASTM C494/C494M-13, 2013, “Standard Specification for Chemical Admixtures for Concrete,” ASTM International, West Conshohocken, PA, 10 pp.

13. ASTM C1157/C1157M-20, 2020, “Standard Performance Specification for Hydraulic Cement,” ASTM International, West Conshohocken, PA, 5 pp.

14. ASTM C1437-15, 2015, “Standard Test Method for Flow of Hydraulic Cement Mortar,” ASTM International, West Conshohocken, PA, 2 pp.

15. Ayub, T.; Shafiq, N.; and Khan, S., 2016, “Compressive Stress-Strain Behavior of HSFRC Reinforced with Basalt Fibers,” Journal of Materials in Civil Engineering, ASCE, V. 28, No. 4, p. 06015014. doi: 10.1061/(ASCE)MT.1943-5533.000144110.1061/(ASCE)MT.1943-5533.0001441 ↗

16. Balgude, M. V., 2014, “Experimental Study on Crimped Steel Fiber Reinforced Concrete Deep Beam in Shear,” IOSR Journal of Mechanical and Civil Engineering, V. 11, No. 2, pp. 24-39. doi: 10.9790/1684-1124243910.9790/1684-11242439 ↗

17. Bediwy, A. G.; Bassuoni, M. T.; and El-Salakawy, E., 2018, “Post-Cracking Behavior of Cementitious Composite Incorporating Nano-Silica and Basalt Fiber Pellets,” Sixth International Conference on the Durability of Concrete Structures, University of Leeds, Leeds, West Yorkshire, UK.

18. Benmokrane, B.; Mohamed, H. M.; Manalo, A.; and Cousin, P., 2017, “Evaluation of Physical and Durability Characteristics of New Headed Glass Fiber-Reinforced Polymer Bars for Concrete Structures,” Journal of Composites for Construction, ASCE, V. 21, No. 2, p. 04016081. doi: 10.1061/(ASCE)CC.1943-5614.000073810.1061/(ASCE)CC.1943-5614.0000738 ↗

19. Bentur, A., and Mindess, S., 2007, Fiber Reinforced Cementitious Composites, second edition, E & FN Spon, New York.10.1201/9781482267747 ↗

20. Brena, S. F., and Morrison, M. C., 2007, “Factors Affecting Strength of Elements Designed using Strut-and-Tie Models,” ACI Structural Journal, V. 104, No. 3, May-June, pp. 267-277.10.14359/18616 ↗

21. CSA A23.3-19, 2019, “Design of Concrete Structures,” Canadian Standards Association, Toronto, ON, Canada, 290 pp.

22. CSA A23.1-19/A23.2-19, 2019, “Concrete Materials and Methods of Concrete Construction/Test Methods and Standard Practices for Concrete,” Canadian Standards Association, Toronto, ON, Canada, 882 pp.

23. CSA S6-19, 2019, “Canadian Highway Bridge Design Code,” Canadian Standards Association, Toronto, ON, Canada, 1185 pp.

24. CSA S806-12, 2017, “Design and Construction of Building Structures with Fibre-Reinforced Polymer,” Canadian Standards Association (CSA), Toronto, ON, Canada, 206 pp.

25. El Refai, A.; Abed, F. H.; and Al-Rahmani, A., 2015, “Structural Performance and Serviceability of Concrete Beams Reinforced with Hybrid (GFRP and Steel) Bars,” Construction and Building Materials, V. 96, pp. 518-529. doi: 10.1016/j.conbuildmat.2015.08.06310.1016/j.conbuildmat.2015.08.063 ↗

26. EN 1992-1-1:2004, 2004, “Eurocode 2: Design of Concrete Structures Part 1-1: General Rules and Rules for Buildings,” European Committee for Standarization, Brussels, Belgium.

27. Ghazy, A.; Bassuoni, M. T.; Maguire, E.; and O’Loan, M., 2016, “Properties of Fiber-Reinforced Mortars Incorporating Nano-Silica,” Fibers (Basel, Switzerland), V. 4, No. 6, pp. 1-16.10.3390/fib4010006 ↗

28. Harris, H. G.; Somboonsong, W.; and Ko, F. K., 1998, “New Ductile Hybrid FRP Reinforcing Bar for Concrete Structures,” Journal of Composites for Construction, ASCE, V. 2, No. 1, pp. 28-37. doi: 10.1061/(ASCE)1090-0268(1998)2:1(28)10.1061/(ASCE)1090-0268(1998)2:1(28) ↗

29. Issa, M. S.; Metwally, I. M.; and Elzeiny, S. M., 2011, “Influence of Fibers on Flexural Behavior and Ductility of Concrete Beams Reinforced with GFRP Rebars,” Engineering Structures, V. 33, No. 5, pp. 1754-1763. doi: 10.1016/j.engstruct.2011.02.01410.1016/j.engstruct.2011.02.014 ↗

30. Iyer, P.; Kenno, S. Y.; and Das, S., 2015, “Mechanical Properties of Fiber Reinforced Concrete Made with Basalt Filament Fibers,” Journal of Materials in Civil Engineering, ASCE, V. 27, No. 11, p. 04015015. doi: 10.1061/(ASCE)MT.1943-5533.000127210.1061/(ASCE)MT.1943-5533.0001272 ↗

31. Iyer, P.; Kenno, S. Y.; and Das, S., 2016, “Performance of Fiber Reinforced Concrete Made with Basalt Bundled Fibers,” Advances in Civil Engineering Materials, V. 5, No. 1, pp. 107-123. doi: 10.1520/ACEM2015002710.1520/ACEM20150027 ↗

32. Jaeger, G. L.; Tadros, G.; and Mufti, A. A., 1995, “Balanced Section, Ductility, and Deformability in Concrete with FRP Reinforcement,” Research Report No. 2-1995, Industry Center for Computer-Aided Engineering, Technical University of Nova Scotia, Halifax, NS, Canada.

33. Kuchma, D.; Yindeesuk, S.; Nagle, T.; Hart, J.; and Lee, H. H., 2008, “Experimental Validation of Strut-and-Tie Method for Complex Regions,” ACI Structural Journal, V. 105, No. 5, Sept.-Oct., pp. 578-589.10.14359/19941 ↗

34. Madan, S. K.; Rajesh, K. G.; and Singh, S. P., 2007, “Steel Fibers as Replacement of Web Reinforcement for RCC Deep Beams in Shear,” Asian Journal of Civil Engineering, Building and Housing, V. 8, No. 5, pp. 479-489.

35. Mahmoud, K.; Ghazy, A.; Bassuoni, M. T.; and El-Salakawy, E. F., 2017, “Properties of Nano-Modified Fiber-Reinforced Cementitious Composites,” Journal of Materials in Civil Engineering, ASCE, V. 29, No. 10, p. 04017173. doi: 10.1061/(ASCE)MT.1943-5533.000204010.1061/(ASCE)MT.1943-5533.0002040 ↗

36. Mansur, M. A., and Ong, K. C. G., 1991, “Behavior of Reinforced Fiber Concrete Deep Beams in Shear,” ACI Structural Journal, V. 88, No. 1, Jan.-Feb., pp. 98-105.10.14359/3128 ↗

37. Moradi, M., and Esfahani, M. R., 2017, “Application of the Strut-and-Tie Method for Steel Fiber Reinforced Concrete Deep Beams,” Construction and Building Materials, V. 131, pp. 423-437. doi: 10.1016/j.conbuildmat.2016.11.04210.1016/j.conbuildmat.2016.11.042 ↗

38. Naaman, A. E., and Jeong, S. M., 1995, “Structural Ductility of Concrete Beams Prestressed with FRP Tendons,” Proceedings, 2nd International RILEM Symposium, FRPRXS-2, Non-Metric (FRP) Reinforcement for Concrete Structures, E &FN Spon, London, UK, pp. 379-386.

39. Sahoo, D. R.; Flores, C. A.; and Chao, S. H., 2012, “Behavior of Steel Fiber-Reinforced Concrete Deep Beams with Large Opening,” ACI Structural Journal, V. 109, No. 2, Mar.-Apr., pp. 193-204.10.14359/51683630 ↗

40. Sorelli, L. G.; Meda, A.; and Plizzari, G. A., 2006, “Steel Fiber Concrete Slabs on Ground: A Structural Matter,” ACI Structural Journal, V. 103, No. 4, July-Aug., pp. 551-558.10.14359/16431 ↗

41. Tuchscherer, R. G., and Quesada, A., 2015, “Replacement of Deformed Side-Face Steel Reinforcement in Deep Beams with Steel Fibers,” Structures, V. 3, pp. 130-136. doi: 10.1016/j.istruc.2015.03.00810.1016/j.istruc.2015.03.008 ↗

42. Vecchio, F. J. and Collins, M. P., 1986, “The Modified Compression-Field Theory for Reinforced Concrete Elements Subjected to Shear,” ACI Journal Proceedings, V. 83, No. 2, Mar.-Apr., pp. 219-231.10.14359/10416 ↗

43. Wang, H., and Belarbi, A., 2011, Ductility Characteristics of Fiber-Reinforced-Concrete Beams Reinforced with FRP Rebars, Construction and Building Materials, V. 25, No. 5, pp. 2391-2401. doi: 10.1016/j.conbuildmat.2010.11.04010.1016/j.conbuildmat.2010.11.040 ↗

44. Wight, J. K., and MacGregor, J. G., 2009, “Reinforced Concrete: Mechanics and Design,” sixth edition, Pearson Prentice Hall, Upper Saddle River, NJ, pp. 1-1157.