journal article·2021-01-15Open access

Platinum metallization on silicon and silicates

Jeffrey C. Taylor

Journal of Materials Research· Volume 36· Issue 1

Abstract

Thin films of platinum deposited by physical vapor deposition (PVD) processes such as evaporation and sputtering are used in many academic and industrial settings, for example to provide metallization when tolerance to corrosive thermal cycling is desired, or in electrocatalysis research. In this review, various practical considerations for platinum (Pt) metallization on both Si and SiO2 are placed in context with a comprehensive data review of diffusion measurements. The relevance of diffusion phenomena to the development of microstructure during deposition as well as the effect of microstructure on the properties of deposited films are discussed with respect to the Pt–Si system. Since Pt and Si readily form silicides, diffusion barriers are essential components of Pt metallization on Si, and various failure modes for diffusion barriers between Pt and Si are clarified with images obtained by electron microscopy. Adhesion layers for Pt films deposited on SiO2 are also considered.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Copper Interconnects and Reliability · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. B.C. Beard and P.N. Ross: Characterization of a titanium-promoted supported platinum electrocatalyst. J. Electrochem. Soc. 133, 1839–1845 (1986).10.1149/1.2109033 ↗
2. C.J. Smithells: Smithells Metals Reference Book [Electronic Resource] (Elsevier Butterworth-Heinemann, Boston, MA, USA, 2004).
3. J.V. Mantese and W.V. Alcini: Platinum wire wedge bonding: A new IC and microsensor interconnect. J. Electron. Mater. 17, 285–289 (1988).10.1007/BF02652107 ↗
4. J.E. Robinson, N.Y. Labrador, H. Chen, B.E. Sartor, and D.V. Esposito: Silicon oxide-encapsulated platinum thin films as highly active electrocatalysts for carbon monoxide and methanol oxidation. ACS Catal. 8, 11423–11434 (2018).10.1021/acscatal.8b03626 ↗
5. R. Zeiser, P. Wagner, and J. Wilde: Investigation of ultrasonic platinum and palladium wire bonding as interconnection technology for high-temperature SiC-MEMS. In 2012 4th Electronic System-Integration Technology Conference, 2012; pp. 1–6. doi:10.1109/ESTC.2012.6542125.10.1109/ESTC.2012.6542125 ↗
6. E. Brachmann, M. Seifert, D. Ernst, S.B. Menzel, and T. Gemming: Pt-wire bonding optimization for electroplated Pt films on γ-Al2O3 for high temperature and harsh environment applications. Sens. Actuators Phys. 284, 129–134 (2018).10.1016/j.sna.2018.10.023 ↗
7. M. Ohring: Materials Science of Thin Films (Elsevier Science & Technology, Burlington, MA, USA, 2001).
8. J.E. Mahan: Physical Vapor Deposition of Thin Films (Wiley, Chichester, U.K., 2000).
9. L.I. Maissel and R. Glang, eds: Handbook of Thin Film Technology (McGraw-Hill, New York, NY, USA, 1970).
10. S.M. Sze: Physics of Semiconductor Devices (Wiley, New York, NY, USA, 1981).
11. K.N. Tu, J.W. Mayer, and L.C. Feldman: Electronic Thin Film Science: For Electrical Engineers and Materials Scientists (Maxwell Macmillan International, Toronto, Canada, 1992).
12. J. Derrien: 4.2 Schottky barrier heights of TM silicides on Si and GaAs. In Properties of Metal Silicides, K. Maex and M. Van Rossum, eds. (INSPEC, London, U.K., 1995), pp. 164–168.
13. D.M. Solina, R.W. Cheary, P.D. Swift, S. Dligatch, G.M. McCredie, B. Gong, and P. Lynch: Investigation of the interfacial structure of ultra-thin platinum films using X-ray reflectivity and X-ray photoelectron spectroscopy. Thin Solid Films 372, 94–103 (2000).10.1016/S0040-6090(00)01044-0 ↗
14. P. Gas and F.M. d'Heurle: 4 Diffusion in silicides. In Diffusion in Semiconductors, D.L. Beke, ed.; Landolt-Börnstein - Group III Condensed Matter (Springer, Berlin, Heidelberg, Germany, 1998); pp. 1–38. doi:10.1007/10426818_13.10.1007/10426818_13 ↗
15. R. Pretorius, J.M. Harris, and M.-A. Nicolet: Reaction of thin metal films with SiO2 substrates. Solid-State Electron 21, 667–675 (1978).10.1016/0038-1101(78)90335-0 ↗
16. P.J. Mohr, D.B. Newell, and B.N. Taylor: CODATA recommended values of the fundamental physical constants: 2014. Rev. Mod. Phys. 88, 035009 (2016).10.1103/RevModPhys.88.035009 ↗
17. J.A.M.v. Liempt: Die Berechnung der Auflockerungswärme der Metalle aus Rekristallisationsdaten. Z. Für Phys. 96, 534–541 (1935).10.1007/BF01337708 ↗
18. N.A. Gjostein: 9 Short circuit diffusion. In Diffusion; Papers Presented at a Seminar of the American Society for Metals, October 14 and 15, 1972. (American Society for Metals: Metals Park, OH, USA, 1973).
19. A.M. Brown and M.F. Ashby: Correlations for diffusion constants. Acta Metall. 28, 1085–1101 (1980).10.1016/0001-6160(80)90092-9 ↗
20. R.W. Balluffi, S.M. Allen, and W.C. Carter: Kinetics of Materials (Wiley-Interscience, Hoboken, NJ, USA, 2005).10.1002/0471749311 ↗
21. C.P. Flynn: Point Defects and Diffusion (Clarendon Press, Oxford, U.K., 1972).
22. R.W. Balluffi and J.M. Blakely: Special aspects of diffusion in thin films. Thin Solid Films 25, 363–392 (1975).10.1016/0040-6090(75)90056-5 ↗
23. J.L. Bocquet, G. Brebec, and Y. Limoge: 7 Diffusion in metals and alloys. In Physical Metallurgy, 4th ed., R.W. Cahn and P. Haasen, eds. (Elsevier B.V., North-Holland, Oxford, U.K., 1996); pp. 535–668.10.1016/B978-044489875-3/50012-0 ↗
24. S. Murarka: 5 Diffusion barriers in semiconductor devices/circuits .In Diffusion Processes in Advanced Technological Materials, Devendra Gupta, ed. (William Andrew, Inc., Norwich, NY, USA, 2005), pp. 239–281.10.1016/B978-081551501-2.50007-1 ↗
25. F. Cattaneo, E. Germagnoli, and F. Grasso: Self-diffusion in platinum. Philos. Mag. J. Theor. Exp. Appl. Phys. 7, 1373–1383 (1962).
26. K. Maier, H. Mehrer, E. Lessmann, and W. Schüle: Self-diffusion in nickel at low temperatures. Phys. Status Solidi B 78, 689–698 (1976).10.1002/pssb.2220780230 ↗
27. C.P. Flynn: Constraints on the growth of metallic superlattices. J. Phys. F Met. Phys. 18, L195 (1988).10.1088/0305-4608/18/9/005 ↗
28. D. Lazarus: Diffusion in metals. In Solid State Physics, F. Seitz and D. Turnbull, eds., Vol. 10 (Academic Press, 1960); pp. 71–126. doi:10.1016/S0081-1947(08)60701-8.10.1016/S0081-1947(08)60701-8 ↗
29. G.V. Kidson and R. Ross: Self diffusion in polycrystalline platinum. Int. J. Appl. Radiat. Isot. 2, 261 (1957).10.1016/0020-708X(57)90259-4 ↗
30. D. Schumacher, A. Seeger, and O. Härlin: Vacancies, divacancies, and self-diffusion in platinum. Phys. Status Solidi B 25, 359–371 (1968).10.1002/pssb.19680250135 ↗
31. A. Seeger and K.P. Chik: Diffusion mechanisms and point defects in silicon and germanium. Phys. Status Solidi B 29, 455–542 (1968).10.1002/pssb.19680290202 ↗
32. B. Million and J. Kucera: Diffusion of sup(193 m)Pt in platinum, γ-iron, cobalt and nickel. Kov. Mater. 11, 300–306 (1973).
33. G. Rein, H. Mehrer, and K. Maier: Diffusion of 197Pt and 199Au in platinum at low temperatures. Phys. Status Solidi A 45, 253–261 (1978).10.1002/pssa.2210450130 ↗
34. N.H. Nachtrieb, J.A. Weil, E. Catalano, and A.W. Lawson: Self-diffusion in solid sodium. II. The effect of pressure. J. Chem. Phys. 20, 1189–1194 (1952).10.1063/1.1700709 ↗
35. N.H. Nachtrieb and G.S. Handler: A relaxed vacancy model for diffusion in crystalline metals. Acta Metall. 2, 797–802 (1954).10.1016/0001-6160(54)90031-0 ↗
36. G. Neumann: Diffusion mechanisms in metals. In Defect and Diffusion Forum, G.E. Murch and D.J. Fischer, eds.; Defect and Diffusion Forum, Vols. 66–69 (Sci-Tech Publications, Brookfield, VT, USA, 1990); pp. 43–64. doi: 10.4028/www.scientific.net/DDF.66-69.43.10.4028/www.scientific.net/DDF.66-69.43 ↗
37. N.L. Peterson: Self-diffusion in pure metals. J. Nucl. Mater. 69–70, 3–37 (1978).10.1016/0022-3115(78)90234-9 ↗
38. W. Frank, U. Gösele, H. Mehrer, and A. Seeger: 2-Diffusion in silicon and germanium. In Diffusion in Crystalline Solids, G.E. Murch and A.S. Nowick, eds. (Academic Press, 1984); pp. 63–142. doi:10.1016/B978-0-12-522662-2.50007-8.10.1016/B978-0-12-522662-2.50007-8 ↗
39. H. Bracht, E.E. Haller, and R. Clark-Phelps: Silicon self-diffusion in isotope heterostructures. Phys. Rev. Lett. 81, 393–396 (1998).10.1103/PhysRevLett.81.393 ↗
40. H. Bracht, N.A. Stolwijk, and H. Mehrer: Properties of intrinsic point defects in silicon determined by zinc diffusion experiments under nonequilibrium conditions. Phys. Rev. B 52, 16542–16560 (1995).10.1103/PhysRevB.52.16542 ↗
41. A. Ural, P.B. Griffin, and J.D. Plummer: Fractional contributions of microscopic diffusion mechanisms for common dopants and self-diffusion in silicon. J. Appl. Phys. 85, 6440–6446 (1999).10.1063/1.370285 ↗
42. F.F. Morehead: The diffusivity of self-interstitials in silicon. MRS Online Proc. Libr. Arch. 104, 99–104 (1987).10.1557/PROC-104-99 ↗
43. F.C. Frank and D. Turnbull: Mechanism of diffusion of copper in germanium. Phys. Rev. 104, 617–618 (1956).10.1103/PhysRev.104.617 ↗
44. U. Gösele, W. Frank, and A. Seeger: Mechanism and kinetics of the diffusion of gold in silicon. Appl. Phys. 23, 361–368 (1980).10.1007/BF00903217 ↗
45. M. Jacob, P. Pichler, H. Ryssel, and R. Falster: Determination of vacancy concentrations in the bulk of silicon wafers by platinum diffusion experiments. J. Appl. Phys. 82, 182–191 (1997).10.1063/1.365796 ↗
46. H. Zimmermann and H. Ryssel: The modeling of platinum diffusion in silicon under non-equilibrium conditions. J. Electrochem. Soc. 139, 256–262 (1992).10.1149/1.2069180 ↗
47. W. Lerch, N.A. Stolwijk, H. Mehrer, and C. Poisson: Diffusion of platinum into dislocated and non-dislocated silicon. Semicond. Sci. Technol. 10, 1257 (1995).10.1088/0268-1242/10/9/009 ↗
48. E. Badr, P. Pichler, and G. Schmidt: Modeling platinum diffusion in silicon. J. Appl. Phys. 116, 133508 (2014).10.1063/1.4896909 ↗
49. S. Mantovani, F. Nava, C. Nobili, and G. Ottaviani: In-diffusion of Pt in Si from the PtSi/Si interface. Phys. Rev. B 33, 5536–5544 (1986).10.1103/PhysRevB.33.5536 ↗
50. F. Morehead, N.A. Stolwijk, W. Meyberg, and U. Gösele: Self-interstitial and vacancy contributions to silicon self-diffusion determined from the diffusion of gold in silicon. Appl. Phys. Lett. 42, 690–692 (1983).10.1063/1.94074 ↗
51. P.M. Fahey, P.B. Griffin, and J.D. Plummer: Point defects and dopant diffusion in silicon. Rev. Mod. Phys. 61, 289–384 (1989).10.1103/RevModPhys.61.289 ↗
52. R.O. Simmons and R.W. Balluffi: Measurements of equilibrium vacancy concentrations in aluminum. Phys. Rev. 117, 52–61 (1960).10.1103/PhysRev.117.52 ↗
53. C. Kittel: Introduction to Solid State Physics, 8th ed. (Wiley, Hoboken, NJ, USA, 2004).
54. G.P. Tiwari, R.S. Mehrotra, and Y. Iijima: 2. Solid state diffusion and bulk properties .In Diffusion Processes in Advanced Technological Materials, Devendra Gupta, ed. (William Andrew, Inc., Norwich, NY, 2005), pp. 69–11110.1016/B978-081551501-2.50004-6 ↗
55. A.G. Dirks and H.J. Leamy: Columnar microstructure in vapor-deposited thin films. Thin Solid Films 47, 219–233 (1977).10.1016/0040-6090(77)90037-2 ↗
56. C.V. Thompson and R. Carel: Texture development in polycrystalline thin films. Mater. Sci. Eng. B 32, 211–219 (1995).10.1016/0921-5107(95)03011-5 ↗
57. C.V. Thompson: Structure evolution during processing of polycrystalline films. Annu. Rev. Mater. Sci. 30, 159–190 (2000).10.1146/annurev.matsci.30.1.159 ↗
58. B.A. Movchan and A.V. Demchishin: Structure and properties of thick condensates of nickel, titanium, tungsten, aluminum oxides, and zirconium dioxide in vacuum. Fiz Met. Met. 28, 653–660 (1969).
59. J.A. Thornton: High rate thick film growth. Annu. Rev. Mater. Sci. 7, 239–260 (1977).10.1146/annurev.ms.07.080177.001323 ↗
60. R. Messier, A.P. Giri, and R.A. Roy: Revised structure zone model for thin film physical structure. J. Vac. Sci. Technol. A 2, 500–503 (1984).10.1116/1.572604 ↗
61. C.R.M. Grovenor, H.T.G. Hentzell, and D.A. Smith: The development of grain structure during growth of metallic films. Acta Metall. 32, 773–781 (1984).10.1016/0001-6160(84)90150-0 ↗
62. D.A. Smith and A. Ibrahim: Zone descriptions of film structure-a rationale. MRS Online Proc. Libr. Arch. 317, 401–412 (1993).10.1557/PROC-317-401 ↗
63. A. Anders: A structure zone diagram including plasma-based deposition and ion etching. Thin Solid Films 518, 4087–4090 (2010).10.1016/j.tsf.2009.10.145 ↗
64. P.B. Barna and M. Adamik: Fundamental structure forming phenomena of polycrystalline films and the structure zone models. Thin Solid Films 317, 27–33 (1998).10.1016/S0040-6090(97)00503-8 ↗
65. P.B. Barna and G. Radnóczi: 3 - Structure formation during deposition of polycrystalline metallic thin films. In Metallic Films for Electronic, Optical and Magnetic Applications, K. Barmak and K. Coffey, eds. (Woodhead Publishing, 2014); pp. 67–120. doi:10.1533/9780857096296.1.67.10.1533/9780857096296.1.67 ↗
66. J.A. Thornton: Influence of substrate temperature and deposition rate on structure of thick sputtered Cu coatings. J. Vac. Sci. Technol. 12, 830–835 (1975).10.1116/1.568682 ↗
67. J.A. Thornton and D.W. Hoffman: Stress-related effects in thin films. Thin Solid Films 171, 5–31 (1989).10.1016/0040-6090(89)90030-8 ↗
68. I. Petrov, P.B. Barna, L. Hultman, and J.E. Greene: Microstructural evolution during film growth. J. Vac. Sci. Technol. A 21, S117–S128 (2003).10.1116/1.1601610 ↗
69. J.A. Thornton: Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings. J. Vac. Sci. Technol. 11, 666–670 (1974).10.1116/1.1312732 ↗
70. H. Windischmann: Intrinsic stress in sputtered thin films. J. Vac. Sci. Technol. A 9, 2431–2436 (1991).10.1116/1.577295 ↗
71. C.L. Liu, J.M. Cohen, J.B. Adams, and A.F. Voter: EAM study of surface self-diffusion of single adatoms of Fcc metals Ni, Cu, Al, Ag, Au, Pd, and Pt. Surf. Sci. 253, 334–344 (1991).10.1016/0039-6028(91)90604-Q ↗
72. G.H. Gilmer, H. Huang, T.D. de la Rubia, J. Dalla Torre, and F. Baumann: Lattice monte carlo models of thin film deposition. Thin Solid Films 365, 189–200 (2000).10.1016/S0040-6090(99)01057-3 ↗
73. L. Vitos, A.V. Ruban, H.L. Skriver, and J. Kollár: The surface energy of metals. Surf. Sci. 411, 186–202 (1998).10.1016/S0039-6028(98)00363-X ↗
74. H. Huang, G.H. Gilmer, and T. Díaz de la Rubia: An atomistic simulator for thin film deposition in three dimensions. J. Appl. Phys. 84, 3636–3649 (1998).10.1063/1.368539 ↗
75. G. Knuyt, C. Quaeyhaegens, J. D'Haen, and L.M. Stals: A quantitative model for the evolution from random orientation to a unique texture in PVD thin film growth. Thin Solid Films 258, 159–169 (1995).10.1016/0040-6090(94)06353-2 ↗
76. J.A. Thornton: The influence of bias sputter parameters on thick copper coatings deposited using a hollow cathode. Thin Solid Films 40, 335–344 (1977).10.1016/0040-6090(77)90135-3 ↗
77. J.A. Thornton, J. Tabock, and D.W. Hoffman: Internal stresses in metallic films deposited by cylindrical magnetron sputtering. Thin Solid Films 64, 111–119 (1979).10.1016/0040-6090(79)90550-9 ↗
78. K. Müller: Stress and microstructure of sputter-deposited thin films: Molecular dynamics investigations. J. Appl. Phys. 62, 1796–1799 (1987).10.1063/1.339559 ↗
79. J.A. Thornton and D.W. Hoffman: Internal stresses in titanium, nickel, molybdenum, and tantalum films deposited by cylindrical magnetron sputtering. J. Vac. Sci. Technol. 14, 164–168 (1977).10.1116/1.569113 ↗
80. D.W. Hoffman and J.A. Thornton: Internal stresses in Cr, Mo, Ta, and Pt films deposited by sputtering from a planar magnetron source. J. Vac. Sci. Technol. 20, 355–358 (1982).10.1116/1.571463 ↗
81. B.N. Chapman: Thin-film adhesion. J. Vac. Sci. Technol. 11, 106–113 (1974).10.1116/1.1318537 ↗
82. R. Koch: The intrinsic stress of polycrystalline and epitaxial thin metal films. J. Phys. Condens. Matter. 6, 9519 (1994).10.1088/0953-8984/6/45/005 ↗
83. J.A. Floro, S.J. Hearne, J.A. Hunter, P. Kotula, E. Chason, S.C. Seel, and C.V. Thompson: The dynamic competition between stress generation and relaxation mechanisms during coalescence of volmer–weber thin films. J. Appl. Phys. 89, 4886–4897 (2001).10.1063/1.1352563 ↗
84. W.D. Nix and B.M. Clemens: Crystallite coalescence: A mechanism for intrinsic tensile stresses in thin films. J. Mater. Res. 14, 3467–3473 (1999).10.1557/JMR.1999.0468 ↗
85. C.V. Thompson: On the grain size and coalescence stress resulting from nucleation and growth processes during formation of polycrystalline thin films. J. Mater. Res. 14, 3164–3168 (1999).10.1557/JMR.1999.0424 ↗
86. E. Grantscharova: Texture transition in thin metal films vacuum condensed on glass: A general consideration. Thin Solid Films 224, 28–32 (1993).10.1016/0040-6090(93)90453-V ↗
87. J.A. Thornton: The microstructure of sputter-deposited coatings. J. Vac. Sci. Technol. A 4, 3059–3065 (1986).10.1116/1.573628 ↗
88. J.W.M. DuMond and J.P. Youtz: Selective X-ray diffraction from artificially stratified metal films deposited by evaporation. Phys. Rev. 48, 703–703 (1935).10.1103/PhysRev.48.703 ↗
89. J. DuMond and J.P. Youtz: An X-ray method of determining rates of diffusion in the solid state. J. Appl. Phys. 11, 357–365 (1940).10.1063/1.1712784 ↗
90. M.-A. Nicolet: Diffusion barriers in thin films. Thin Solid Films 52, 415–443 (1978).10.1016/0040-6090(78)90184-0 ↗
91. A.G. Michette: Optical Systems for Soft X Rays (Plenum Press, New York, NY, USA, 1986).10.1007/978-1-4613-2223-8 ↗
92. C.A. Neugebauer: 8 Condensation, nucleation, and growth of thin films. In Handbook of Thin Film Technology, L.I. Maissel and R. Glang, eds. (McGraw-Hill, New York, NY, USA, 1970), pp. 3–44.
93. H.P. Bonzel: A surface diffusion mechanism at high temperature. Surf. Sci. 21, 45–60 (1970).10.1016/0039-6028(70)90062-2 ↗
94. R.W. Balluffi: 6 - Grain boundary diffusion mechanisms in metals**this chapter is based on the 1982 institute of metals lecture. American Institute of Mining, Metallurgical, and Petroleum Engineers. In Diffusion in Crystalline Solids, G.E. Murch and A.S. Nowick, eds. (Academic Press, 1984); pp. 319–377. doi:10.1016/B978-0-12-522662-2.50011-X.10.1016/B978-0-12-522662-2.50011-X ↗
95. L.G. Harrison: Influence of dislocations on diffusion kinetics in solids with particular reference to the alkali halides. Trans. Faraday Soc. 57, 1191–1199 (1961).10.1039/tf9615701191 ↗
96. J.W. Cahn and R.W. Balluffi: On diffusional mass transport in polycrystals containing stationary or migrating grain boundaries. Scr. Metall. 13, 499–502 (1979).10.1016/0036-9748(79)90077-2 ↗
97. M. DiBattista and J.W. Schwank: determination of diffusion in polycrystalline platinum thin films. J. Appl. Phys. 86, 4902–4907 (1999).10.1063/1.371458 ↗
98. M.P. Lepselter: Beam-lead technology. Bell Syst. Tech. J. 45, 233–253 (1966).10.1002/j.1538-7305.1966.tb00018.x ↗
99. J.M. Blakely and H. Mykura: Surface self diffusion and surface energy measurements on platinum by the multiple scratch method. Acta Metall. 10, 565–572 (1962).10.1016/0001-6160(62)90203-1 ↗
100. A.J. Melmed: Surface self-diffusion of nickel and platinum. J. Appl. Phys. 38, 1885–1892 (1967).10.1063/1.1709778 ↗