Biocompatibility and corrosion resistance of low-cost Ti–14Mn–Zr alloys
Source abstract
Abstract
Titanium and titanium alloys are widely spread in biomedical applications. The need to replace high-cost alloying elements is increasing, as well as the low biocompatibility elements. In the current study, the microstructure, mechanical properties, corrosion resistance, and cytocompatibility of the new biomedical Ti–14Mn–xZr alloys were investigated (x = 1.5, 3, and 6% wt. Zr). Homogenization, solution heat treatments, and cold deformation were applied. The results showed the predominance of the β-phase even after a high degree of deformation. The mechanical properties showed that Ti–14Mn–xZr have ultra-high-strength values that reach 1830 MPa with low elongation. Furthermore, the severe deformation by cold rolling and increasing the Zr content enhances the corrosion resistance of Ti–14Mn–xZr alloys. The cytotoxicity test shows that Ti–14Mn–xZr alloys have very high cytocompatibility with cell viability within 96 ≈ 99%, representing a potential alloy that can be considered for further development of bio-applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. M. Atapour, A.L. Pilchak, G.S. Frankel, J.C. Williams, Mater. Sci. Eng. C 31, 885 (2011). https://doi.org/10.1016/j.msec.2011.02.00510.1016/j.msec.2011.02.005 ↗
2. M. Niinomi, Metall. Mater. Trans. A. 33, 477 (2002). https://doi.org/10.1007/s11661-002-0109-210.1007/s11661-002-0109-2 ↗
3. R. Eftekhar Ashtiani, M. Alam, S. Tavakolizadeh, K. Abbasi, Evid. Based Complement. Altern. Med. 2021, 3349433 (2021). https://doi.org/10.1155/2021/334943310.1155/2021/3349433 ↗
4. N. Eliaz, Materials 12, 407 (2019). https://doi.org/10.3390/ma1203040710.3390/ma12030407 ↗
5. S. Ali, A.M. Abdul Rani, Z. Baig, S.W. Ahmed, G. Hussain, K. Subramaniam, S. Hastuty, T.V.V.L.N. Rao, Corros. Rev. 38, 381 (2020). https://doi.org/10.1515/corrrev-2020-000110.1515/corrrev-2020-0001 ↗
6. O.M. Ivasishin, P.E. Markovsky, Y.V. Matviychuk, S.L. Semiatin, Metall. Mater. Trans. A. 34, 147 (2003). https://doi.org/10.1007/s11661-003-0216-810.1007/s11661-003-0216-8 ↗
7. H. Matsumoto, S. Watanabe, S. Hanada, J. Alloys Compd. 439, 146 (2007). https://doi.org/10.1016/j.jallcom.2006.08.26710.1016/j.jallcom.2006.08.267 ↗
8. O.M. Ivasishin, P.E. Markovsky, Y.V. Matviychuk, S.L. Semiatin, C.H. Ward, S. Fox, J. Alloys Compd. 457, 296 (2008). https://doi.org/10.1016/j.jallcom.2007.03.07010.1016/j.jallcom.2007.03.070 ↗
9. M.-K. Han, M.-J. Hwang, M.-S. Yang, H.-S. Yang, H.-J. Song, Y.-J. J. M. S. Park and E. A616, 268 (2014)10.1016/j.msea.2014.08.010 ↗
10. T. Okabe, M. Kikuchi, C. Ohkubo, M. Koike, O. Okuno, Y. Oda, JOM 56, 46 (2004). https://doi.org/10.1007/s11837-004-0145-z10.1007/s11837-004-0145-z ↗
11. H.-C. Hsu, S.-C. Wu, T.-Y. Chiang, W.-F. Ho, J. Alloy. Compd. 476, 817 (2009). https://doi.org/10.1016/j.jallcom.2008.09.11610.1016/j.jallcom.2008.09.116 ↗
12. M. Hattori, S. Takemoto, M. Yoshinari, E. Kawada, Y. Oda, Dent. Mater. J. 29, 570 (2010). https://doi.org/10.4012/dmj.2009-11810.4012/dmj.2009-118 ↗
13. Q.Y. Wang, Y.B. Wang, J.P. Lin, Y.F. Zheng, Mater. Sci. Eng. C 33, 1601 (2013). https://doi.org/10.1016/j.msec.2012.12.07010.1016/j.msec.2012.12.070 ↗
14. O. Fukushima, T. Yoneyama, H. Doi, T. Hanawa, Dent. Mater. J. 25, 151 (2006). https://doi.org/10.4012/dmj.25.15110.4012/dmj.25.151 ↗
15. A. Cremasco, A.D. Messias, A.R. Esposito, E.A.D.R. Duek, R. Caram, Mater. Sci. Eng. C 31, 833 (2011). https://doi.org/10.1016/j.msec.2010.12.01310.1016/j.msec.2010.12.013 ↗
16. A. Biesiekierski, J. Wang, M. Abdel-Hady Gepreel, C. Wen, Acta Biomater. 8, 1661 (2012). https://doi.org/10.1016/j.actbio.2012.01.01810.1016/j.actbio.2012.01.018 ↗
17. M. Abdel-Hady Gepreel, M. Niinomi, J. Mech. Behav. Biomed. Mater. 20, 407 (2013). https://doi.org/10.1016/j.jmbbm.2012.11.01410.1016/j.jmbbm.2012.11.014 ↗
18. P.F. Santos, M. Niinomi, K. Cho, M. Nakai, H. Liu, N. Ohtsu, M. Hirano, M. Ikeda, T. Narushima, Acta Biomater. 26, 366 (2015). https://doi.org/10.1016/j.actbio.2015.08.01510.1016/j.actbio.2015.08.015 ↗
19. K. Cho, M. Niinomi, M. Nakai, H. Liu, P.F. Santos, Y. Itoh, M. Ikeda, M.A.-H. Gepreel, T. Narushima, J. Alloys Compd. 664, 272 (2016). https://doi.org/10.1016/j.jallcom.2015.12.20010.1016/j.jallcom.2015.12.200 ↗
20. W.F. Ho, W.K. Chen, S.C. Wu, H.C. Hsu, J. Mater. Sci. Mater. Med. 19, 3179 (2008). https://doi.org/10.1007/s10856-008-3454-x10.1007/s10856-008-3454-x ↗
21. Y.M. Zhang, F. Chai, J.-C. Hornez, C.L. Li, Y.M. Zhao, M. Traisnel, H.F. Hildebrand, Biomed. Mater. 4, 015004 (2008). https://doi.org/10.1088/1748-6041/4/1/01500410.1088/1748-6041/4/1/015004 ↗
22. J. Gottlow, M. Dard, F. Kjellson, M. Obrecht, L. Sennerby, Clin. Implant Dent. Relat. Res. 14, 538 (2012). https://doi.org/10.1111/j.1708-8208.2010.00289.x10.1111/j.1708-8208.2010.00289.x ↗
23. E. Kobayashi, S. Matsumoto, H. Doi, T. Yoneyama, H. Hamanaka, J. Biomed. Mater. Res. 29, 943 (1995). https://doi.org/10.1002/jbm.82029080510.1002/jbm.820290805 ↗
24. H.M. Grandin, S. Berner, M. Dard, Materials 5, 1348 (2012). https://doi.org/10.3390/ma508134810.3390/ma5081348 ↗
25. D.Q. Martins, W.R. Osório, M.E.P. Souza, R. Caram, A. Garcia, Electrochim. Acta 53, 2809 (2008). https://doi.org/10.1016/j.electacta.2007.10.06010.1016/j.electacta.2007.10.060 ↗
26. A.H. Awad, M. Abdel-Hady Gepreel, Mater. Today: Proc. 33, 1904 (2020). https://doi.org/10.1016/j.matpr.2020.05.44310.1016/j.matpr.2020.05.443 ↗
27. M.K. Gouda, K. Nakamura, M.A.H. Gepreel, J. Appl. Phys. 117, 214905 (2015). https://doi.org/10.1063/1.492197210.1063/1.4921972 ↗
28. M.K. Gouda, M.A.H. Gepreel, K. Nakamura, A. Chiba, Mater. Sci. Forum 890, 352 (2017). https://doi.org/10.4028/www.scientific.net/MSF.890.35210.4028/www.scientific.net/MSF.890.352 ↗
29. M.K. Gouda, M.A.H. Gepreel, K. Yamanaka, H. Bian, K. Nakamura, A. Chiba, JOM 71, 3590 (2019). https://doi.org/10.1007/s11837-019-03690-710.1007/s11837-019-03690-7 ↗
30. ASTM G102-89(2015)e1: Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements, PA, West Conshohocken (2015)
31. Y.M. Abd-Elrhman, M.A. Gepreel, A. Abd El-Moneim, S. Kobayashi, WIT Trans. Eng. Sci. 90, 369 (2015). https://doi.org/10.2495/MC15033110.2495/MC150331 ↗
32. Y. Okazaki, T. Tateishi, Y. Ito, Mater. Trans. JIM 38, 78 (1997). https://doi.org/10.2320/matertrans1989.38.7810.2320/matertrans1989.38.78 ↗
33. R. Huang, Y. Han, Mater. Sci. Eng. C 33, 2353 (2013). https://doi.org/10.1016/j.msec.2013.01.06810.1016/j.msec.2013.01.068 ↗
34. F. Zhang, J. Pan, C. Lin, Corros. Sci. 51, 2130 (2009). https://doi.org/10.1016/j.corsci.2009.05.04410.1016/j.corsci.2009.05.044 ↗
35. K. Guo, T. Wang, K. Meng, C. Yao, Q. Wang, Mater. Res. Express 7, 066511 (2020). https://doi.org/10.1088/2053-1591/ab96fc10.1088/2053-1591/ab96fc ↗
36. M.J. Donachie, Titanium: A Technical Guide, 2 ed., (ASM International, Materials Park, Ohio, USA, 2000). pp. 9–10.10.31399/asm.tb.ttg2.9781627082693 ↗
37. G. Lütjering, J.C. Williams, Titanium, 2nd edn. (Springer, Berlin, 2007), pp. 8–11
38. C. Leyens, M. Peters, Titanium and Titanium Alloys: Fundamentals and Applications (WILEY-VCH Verlag GmbH & Co., Weinheim, 2003), pp. 2–310.1002/3527602119 ↗
39. M. Jackson, K. Dring, Mater. Sci. Technol. 22, 881 (2006). https://doi.org/10.1179/174328406X11114710.1179/174328406X111147 ↗
40. M. Niinomi, Mater. Sci. Eng. A 243, 231 (1998). https://doi.org/10.1016/S0921-5093(97)00806-X10.1016/S0921-5093(97)00806-X ↗
41. J. R. Davis, Alloying : Understanding the Basics (ASM International, Materials Park, Ohio, USA, 2001). pp. 418–421.10.31399/asm.tb.aub.9781627082976 ↗
42. F. H. Froes Titanium: Alloying, Elsevier, Oxford (2001)10.1016/B0-08-043152-6/01690-9 ↗
43. I. Weiss, S.L. Semiatin, Mater. Sci. Eng., A 263, 243 (1999). https://doi.org/10.1016/S0921-5093(98)01155-110.1016/S0921-5093(98)01155-1 ↗
44. M. Ikeda, M. Ueda, R. Matsunaga, M. Ogawa, M. Niinomi, Mater. Trans. 50, 2737 (2009). https://doi.org/10.2320/matertrans.MA20090210.2320/matertrans.MA200902 ↗
45. F. H. Froes, Titanium: Physical Metallurgy, Processing, and Applications, 1 ed., (ASM International, Materials Park, Ohio, USA, 2015). pp. 57–65.10.31399/asm.tb.tpmpa.9781627083188 ↗
46. M. Abdel-Hady, H. Fuwa, K. Hinoshita, H. Kimura, Y. Shinzato, M. Morinaga, Scr. Mater. 57, 1000 (2007). https://doi.org/10.1016/j.scriptamat.2007.08.00310.1016/j.scriptamat.2007.08.003 ↗
47. M.K. Gouda, M.A.H. Gepreel, A.A.E. Moniem, AIP Conf. Proc. 1569, 203 (2013). https://doi.org/10.1063/1.484925910.1063/1.4849259 ↗
48. M.A.-H. Gepreel, in Recent Developments in the Study of Recrystallization, ed. By P. Wilson, (IntechOpen, 2013). p. 117
49. M.A.-H.A.M. Morinaga, Int. J. Mod. Phys. B 23, 1559 (2009). https://doi.org/10.1142/s021797920906126310.1142/s0217979209061263 ↗
50. M. Abdel-Hady, K. Hinoshita, H. Fuwa, Y. Murata, M. Morinaga, Mater. Sci. Eng. A 480, 167 (2008). https://doi.org/10.1016/j.msea.2007.06.08310.1016/j.msea.2007.06.083 ↗
51. K. Nakasuji, M. Okada, Mater. Sci. Eng. A 213, 162 (1996). https://doi.org/10.1016/0921-5093(96)10237-910.1016/0921-5093(96)10237-9 ↗
52. N.T.C. Oliveira, A.C. Guastaldi, Acta Biomater. 5, 399 (2009). https://doi.org/10.1016/j.actbio.2008.07.01010.1016/j.actbio.2008.07.010 ↗
53. M. Naghizadeh, D. Nakhaie, M. Zakeri, M.H. Moayed, Corros. Sci. 94, 420 (2015). https://doi.org/10.1016/j.corsci.2015.02.02510.1016/j.corsci.2015.02.025 ↗
54. J. Lu, P. Ge, Q. Li, W. Zhang, W. Huo, J. Hu, Y. Zhang, Y. Zhao, J. Alloy. Compd. 727, 1126 (2017). https://doi.org/10.1016/j.jallcom.2017.08.23910.1016/j.jallcom.2017.08.239 ↗
55. A.M. Fekry, Electrochim. Acta 54, 3480 (2009). https://doi.org/10.1016/j.electacta.2008.12.06010.1016/j.electacta.2008.12.060 ↗
56. R. Chelariu, G. Bolat, J. Izquierdo, D. Mareci, D.M. Gordin, T. Gloriant, R.M. Souto, Electrochim. Acta 137, 280 (2014). https://doi.org/10.1016/j.electacta.2014.06.02110.1016/j.electacta.2014.06.021 ↗
57. L.H. de Almeida, I.N. Bastos, I.D. Santos, A.J.B. Dutra, C.A. Nunes, S.B. Gabriel, J. Alloy. Compd. 615, S666 (2014). https://doi.org/10.1016/j.jallcom.2014.01.17310.1016/j.jallcom.2014.01.173 ↗
58. L. Mohan, C. Anandan, V.K.W. Grips, Appl. Surf. Sci. 258, 6331 (2012). https://doi.org/10.1016/j.apsusc.2012.03.03210.1016/j.apsusc.2012.03.032 ↗
59. Q. Wang, F. Zhou, Z. Zhou, C. Wang, W. Zhang, L.K.-Y. Li, S.-T. Lee, Electrochim. Acta 112, 603 (2013). https://doi.org/10.1016/j.electacta.2013.09.02210.1016/j.electacta.2013.09.022 ↗
60. J. Málek, F. Hnilica, J. Veselý, B. Smola, K. Kolařík, J. Fojt, M. Vlach, V. Kodetová, Mater. Sci. Eng. A 675, 1 (2016). https://doi.org/10.1016/j.msea.2016.07.06910.1016/j.msea.2016.07.069 ↗
61. M. Amirnejad, M. Rajabi, R. Jamaati, Corros. Sci. 179, 109100 (2021). https://doi.org/10.1016/j.corsci.2020.10910010.1016/j.corsci.2020.109100 ↗
62. I.V. Ivanov, A. Thoemmes, A.A. Kashimbetova, Key Eng. Mater. 769, 42 (2018). https://doi.org/10.4028/www.scientific.net/KEM.769.4210.4028/www.scientific.net/KEM.769.42 ↗
63. M. Hoseini, A. Shahryari, S. Omanovic, J.A. Szpunar, Corros. Sci. 51, 3064 (2009). https://doi.org/10.1016/j.corsci.2009.08.01710.1016/j.corsci.2009.08.017 ↗
64. V.V. Stolyarov, E.A. Prokofiev, R.Z. Valiev, T.C. Lowe and Y.T. Zhu, Nanostructured Materials by High-Pressure Severe Plastic Deformation (Y. T. Zhu and V. Varyukhin), 169, Springer Netherlands,
65. H.A. Johansen, G.B. Adams, P.V. Rysselberghe, J. Electrochem. Soc. 104, 339 (1957). https://doi.org/10.1149/1.242857710.1149/1.2428577 ↗
66. S. Kumar, K. Chattopadhyay, V. Singh, Mater. Charact. 121, 23 (2016). https://doi.org/10.1016/j.matchar.2016.09.03110.1016/j.matchar.2016.09.031 ↗
67. G. Ma, G. Wu, W. Shi, S. Xiang, Q. Chen, X. Mao, Corros. Sci. 176, 108924 (2020). https://doi.org/10.1016/j.corsci.2020.10892410.1016/j.corsci.2020.108924 ↗
68. R. Singh, N.B. Dahotre, J. Mater. Sci.: Mater. Med. 18, 725 (2007). https://doi.org/10.1007/s10856-006-0016-y10.1007/s10856-006-0016-y ↗
69. N. Hallab, J.J. Jacobs, J. Black, Biomaterials 21, 1301 (2000). https://doi.org/10.1016/S0142-9612(99)00235-510.1016/S0142-9612(99)00235-5 ↗
70. Y. Okazaki, E. Gotoh, Biomaterials 26, 11 (2005). https://doi.org/10.1016/j.biomaterials.2004.02.00510.1016/j.biomaterials.2004.02.005 ↗
71. N.S. Manam, W.S.W. Harun, D.N.A. Shri, S.A.C. Ghani, T. Kurniawan, M.H. Ismail, M.H.I. Ibrahim, J. Alloy. Compd. 701, 698 (2017). https://doi.org/10.1016/j.jallcom.2017.01.19610.1016/j.jallcom.2017.01.196 ↗
72. S.S. Sidhu, H. Singh, M.A.-H. Gepreel, Mater. Sci. Eng., C 121, 111661 (2021). https://doi.org/10.1016/j.msec.2020.11166110.1016/j.msec.2020.111661 ↗
73. F. Zhang, A. Weidmann, J.B. Nebe, U. Beck, E. Burkel, J. Biomed. Mater. Res. Part B 94B, 406 (2010). https://doi.org/10.1002/jbm.b.3166810.1002/jbm.b.31668 ↗
74. ISO 10993-5:2009: Biological Evaluation of Medical Devices—Part 5: Tests for in vitro cytotoxicity, International Organization for Standardization, Geneve, Switzerland, 2009