3D-printed solid-state electrolytes for electrochemical energy storage devices
Source abstract
Abstract
Recently, the three-dimensional (3D) printing of solid-state electrochemical energy storage (EES) devices has attracted extensive interests. By enabling the fabrication of well-designed EES device architectures, enhanced electrochemical performances with fewer safety risks can be achieved. In this review article, we summarize the 3D-printed solid-state rechargeable batteries and supercapacitors and discuss various types of printable polymer composite materials for the solid-state electrolyte. The architectures of the printed EES devices and their performances are analyzed. Three 3D printing techniques, namely direct ink writing, fused deposition modeling, and stereolithography are reviewed. The 3D printing techniques have enabled the EES devices to be fabricated into novel lightweight, flexible, and wearable constructions. The development of printable materials, together with the production efficiency of current main 3D printing techniques are discussed. Lastly, the challenges and outlooks for future 3D printing of EES devices are outlined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. J.B. Goodenough, Electrochemical energy storage in a sustainable modern society. Energy Environ. Sci. 7(1), 14 (2014)10.1039/C3EE42613K ↗
2. Z. Yang, J. Zhang, M.C. Kintner-Meyer, X. Lu, D. Choi, J.P. Lemmon, J. Liu, Electrochemical energy storage for green grid. Chem. Rev. 111(5), 3577 (2011)10.1021/cr100290v ↗
3. M. Aneke, M. Wang, Energy storage technologies and real life applications—a state of the art review. Appl. Energy 179, 350 (2016)10.1016/j.apenergy.2016.06.097 ↗
4. D. Connolly, A Review of Energy Storage Technologies (University of Limerick, Ireland, 2009)
5. A. Yoshino, T. Tsubata, M. Shimoyamada, H. Satake, Y. Okano, S. Mori, S. Yata, Development of a lithium-type advanced energy storage device. J. Electrochem. Soc. 151(12), A2180 (2004)10.1149/1.1813671 ↗
6. E. Karden, S. Ploumen, B. Fricke, T. Miller, K. Snyder, Energy storage devices for future hybrid electric vehicles. J. Power Sources 168(1), 2 (2007)10.1016/j.jpowsour.2006.10.090 ↗
7. J. Liu, J. Wang, C. Xu, H. Jiang, C. Li, L. Zhang, J. Lin, Z.X. Shen, Advanced energy storage devices: basic principles, analytical methods, and rational materials design. Adv. Sci. 5(1), 1700322 (2018)10.1002/advs.201700322 ↗
8. A. Olabi, M.A. Abdelkareem, T. Wilberforce, E.T. Sayed, Application of graphene in energy storage device—a review. Renew. Sustain. Energy Rev. 135, 110026 (2021)10.1016/j.rser.2020.110026 ↗
9. Y. Gogotsi, Energy storage wrapped up. Nature 509(7502), 568 (2014)10.1038/509568a ↗
10. X. Wang, M. Salari, D.-E. Jiang, J.C. Varela, B. Anasori, D.J. Wesolowski, S. Dai, M.W. Grinstaff, Y. Gogotsi, Electrode material–ionic liquid coupling for electrochemical energy storage. Nat. Rev. Mater. 5(11), 787 (2020)10.1038/s41578-020-0218-9 ↗
11. D.H. Doughty, E.P. Roth, A general discussion of Li ion battery safety. Electrochem. Soc. Interface 21(2), 37 (2012)
12. K. Liu, Y. Liu, D. Lin, A. Pei, Y. Cui, Materials for lithium-ion battery safety. Sci. Adv. 4(6), eaas9820 (2018)10.1126/sciadv.aas9820 ↗
13. J.-M. Tarascon, Key challenges in future Li-battery research. Philosoph. Trans. R. Soc. A 368(1923), 3227 (2010)10.1098/rsta.2010.0112 ↗
14. B. Liu, Y. Jia, J. Li, S. Yin, C. Yuan, Z. Hu, L. Wang, Y. Li, J. Xu, Safety issues caused by internal short circuits in lithium-ion batteries. J. Mater. Chem. A. 6(43), 21475 (2018)10.1039/C8TA08997C ↗
15. J. Deng, C. Bae, J. Marcicki, A. Masias, T. Miller, Safety modelling and testing of lithium-ion batteries in electrified vehicles. Nat. Energy 3(4), 261 (2018)10.1038/s41560-018-0122-3 ↗
16. M. Wu, X. Li, Q. Zhou, H. Ming, J. Adkins, J. Zheng, Fabrication of Sn film via magnetron sputtering towards understanding electrochemical behavior in lithium-ion battery application. Electrochim. Acta 123, 144 (2014)10.1016/j.electacta.2013.12.192 ↗
17. N. Kuwata, R. Kumar, K. Toribami, T. Suzuki, T. Hattori, J. Kawamura, Thin film lithium ion batteries prepared only by pulsed laser deposition. Solid State Ionics 177(26–32), 2827 (2006)10.1016/j.ssi.2006.07.023 ↗
18. S. Verma, J. Tripathi, M. Katiyar, V. Verma, Biodegradable photolithography compatible substrate for transparent transient electronics and flexible energy storage devices. Appl. Mater. Today 13, 83 (2018)10.1016/j.apmt.2018.08.010 ↗
19. X. Hong, L. He, X. Ma, W. Yang, Y. Chen, L. Zhang, H. Yan, Z. Li, L. Mai, Microstructuring of carbon/tin quantum dots via a novel photolithography and pyrolysis-reduction process. Nano Res. 10(11), 3743 (2017)10.1007/s12274-017-1587-2 ↗
20. W. Zhou, C. Cheng, J. Liu, Y.Y. Tay, J. Jiang, X. Jia, J. Zhang, H. Gong, H.H. Hng, T. Yu, Epitaxial growth of branched α-Fe2O3/SnO2 nano-heterostructures with improved lithium-ion battery performance. Adv. Func. Mater. 21(13), 2439 (2011)10.1002/adfm.201100088 ↗
21. S. Kim, M. Hirayama, S. Taminato, R. Kanno, Epitaxial growth and lithium ion conductivity of lithium-oxide garnet for an all solid-state battery electrolyte. Dalton Trans. 42(36), 13112 (2013)10.1039/c3dt51795k ↗
22. F. Larsson, P. Andersson, P. Blomqvist, B.-E. Mellander, Toxic fluoride gas emissions from lithium-ion battery fires. Sci. Rep. 7(1), 1 (2017)10.1038/s41598-016-0028-x ↗
23. D.S. Thomas, S.W. Gilbert, Costs and cost effectiveness of additive manufacturing. NIST Spec. Publ. 1176, 12 (2014)
24. T. Duda, L.V. Raghavan, 3D metal printing technology. IFAC-PapersOnLine. 49(29), 103 (2016)10.1016/j.ifacol.2016.11.111 ↗
25. C. Buchanan, L. Gardner, Metal 3D printing in construction: a review of methods, research, applications, opportunities and challenges. Eng. Struct. 180, 332 (2019)10.1016/j.engstruct.2018.11.045 ↗
26. Z. Chen, Z. Li, J. Li, C. Liu, C. Lao, Y. Fu, C. Liu, Y. Li, P. Wang, Y. He, 3D printing of ceramics: a review. J. Eur. Ceram. Soc. 39(4), 661 (2019)10.1016/j.jeurceramsoc.2018.11.013 ↗
27. M. Faes, H. Valkenaers, F. Vogeler, J. Vleugels and E. Ferraris: Extrusion-based 3D printing of ceramic components Procedia Cirp. 28, 76 (2015).10.1016/j.procir.2015.04.028 ↗
28. X. Wang, M. Jiang, Z. Zhou, J. Gou, D. Hui, 3D printing of polymer matrix composites: A review and prospective. Compos. B Eng. 110, 442 (2017)10.1016/j.compositesb.2016.11.034 ↗
29. M. Hofmann, 3D Printing Gets a Boost and Opportunities with Polymer Materials (ACS Publications, New York, 2014)
30. H.N. Chia, B.M. Wu, Recent advances in 3D printing of biomaterials. J. Biol. Eng. 9(1), 1 (2015)10.1186/1754-1611-9-1 ↗
31. W. Zhu, X. Ma, M. Gou, D. Mei, K. Zhang, S. Chen, 3D printing of functional biomaterials for tissue engineering. Curr. Opin. Biotechnol. 40, 103 (2016)10.1016/j.copbio.2016.03.014 ↗
32. I.J. Petrick, T.W. Simpson, 3D printing disrupts manufacturing: how economies of one create new rules of competition. Res. Technol. Manag. 56(6), 12 (2013)10.5437/08956308X5606193 ↗
33. F. Mami, J.P. Revéret, S. Fallaha, M. Margni, Evaluating eco-efficiency of 3D printing in the aeronautic industry. J. Ind. Ecol. 21(S1), S37 (2017)10.1111/jiec.12693 ↗
34. A.D. Valentine, T.A. Busbee, J.W. Boley, J.R. Raney, A. Chortos, A. Kotikian, J.D. Berrigan, M.F. Durstock, J.A. Lewis, Hybrid 3D printing of soft electronics. Adv. Mater. 29(40), 1703817 (2017)10.1002/adma.201703817 ↗
35. J.T. Muth, D.M. Vogt, R.L. Truby, Y. Mengüç, D.B. Kolesky, R.J. Wood, J.A. Lewis, Embedded 3D printing of strain sensors within highly stretchable elastomers. Adv. Mater. 26(36), 6307 (2014)10.1002/adma.201400334 ↗
36. P. Stavropoulos, P. Foteinopoulos, A. Papacharalampopoulos, H. Bikas, Addressing the challenges for the industrial application of additive manufacturing: Towards a hybrid solution. Int. J. Lightweight Mater. Manuf. 1(3), 157 (2018)
37. B. Lu, H. Lan, H. Liu, Additive manufacturing frontier: 3D printing electronics. Opto-Electronic Advances. 1(01), 170004 (2018)
38. B.C. Gross, J.L. Erkal, S.Y. Lockwood, C. Chen, D.M. Spence, Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences (ACS Publications, New York, 2014)
39. F. Krujatz, A. Lode, J. Seidel, T. Bley, M. Gelinsky, J. Steingroewer, Additive Biotech—chances, challenges, and recent applications of additive manufacturing technologies in biotechnology. New Biotechnol. 39, 222 (2017)10.1016/j.nbt.2017.09.001 ↗
40. Y.W.D. Tay, B. Panda, S.C. Paul, N.A. Noor Mohamed, M.J. Tan, K.F. Leong, 3D printing trends in building and construction industry: a review. Virtual Phys. Prototyp. 12(3), 261 (2017)10.1080/17452759.2017.1326724 ↗
41. B. Yao, S. Chandrasekaran, J. Zhang, W. Xiao, F. Qian, C. Zhu, E.B. Duoss, C.M. Spadaccini, M.A. Worsley, Y. Li, Efficient 3D printed pseudocapacitive electrodes with ultrahigh MnO2 loading. Joule. 3(2), 459 (2019)10.1016/j.joule.2018.09.020 ↗
42. B. Yao, S. Chandrasekaran, H. Zhang, A. Ma, J. Kang, L. Zhang, X. Lu, F. Qian, C. Zhu, E.B. Duoss, 3D-printed structure boosts the kinetics and intrinsic capacitance of pseudocapacitive graphene aerogels. Adv. Mater. 32(8), 1906652 (2020)10.1002/adma.201906652 ↗
43. B. Yao, H. Peng, H. Zhang, J. Kang, C. Zhu, G. Delgado, D. Byrne, S. Faulkner, M. Freyman, X. Lu, Printing porous carbon aerogels for low temperature supercapacitors. Nano Lett. 21(9), 3731 (2021)10.1021/acs.nanolett.0c04780 ↗
44. X. Tian, T. Wang, H. Ma, K. Tang, S. Hou, H. Jin, G. Cao, Universal strategy towards 3D printable nanomaterial inks for superior cellular high-loading battery electrodes. J. Mater. Chem. A. 9, 16086 (2021)10.1039/D1TA03236D ↗
45. T. Wang, X. Tian, L. Li, L. Lu, S. Hou, G. Cao, H. Jin, 3D printing-based cellular microelectrodes for high-performance asymmetric quasi-solid-state micro-pseudocapacitors. J. Mater. Chem. A. 8(4), 1749 (2020)10.1039/C9TA11386J ↗
46. K. Sun, T.S. Wei, B.Y. Ahn, J.Y. Seo, S.J. Dillon, J.A. Lewis, 3D printing of interdigitated Li-ion microbattery architectures. Adv Mater. 25(33), 4539 (2013)10.1002/adma.201301036 ↗
47. K. Fu, Y. Wang, C. Yan, Y. Yao, Y. Chen, J. Dai, S. Lacey, Y. Wang, J. Wan, T. Li, Z. Wang, Y. Xu, L. Hu, Graphene oxide-based electrode inks for 3D-printed lithium-ion batteries. Adv Mater. 28(13), 2587 (2016)10.1002/adma.201505391 ↗
48. R. Chen, Y. Chen, L. Xu, Y. Cheng, X. Zhou, Y. Cai, L. Mai, 3D-printed interdigital electrodes for electrochemical energy storage devices. J. Mater. Res. (2021). https://doi.org/10.1557/s43578-021-00243-010.1557/s43578-021-00243-0 ↗
49. X. Tian, J. Jin, S. Yuan, C.K. Chua, S.B. Tor, K. Zhou, Emerging 3D-printed electrochemical energy storage devices: a critical review. Adv. Energy Mater. (2017). https://doi.org/10.1002/aenm.20170012710.1002/aenm.201700127 ↗
50. Y. Sun, C. Peng, X. Wang, R. Wang, J. Yang, D. Zhang, Rheological behavior of Al2O3 suspensions containing polyelectrolyte complexes for direct ink writing. Powder Technol. 320, 223 (2017)10.1016/j.powtec.2017.07.049 ↗
51. T. Chen, H. Bakhshi, L. Liu, J. Ji, S. Agarwal, Combining 3D printing with electrospinning for rapid response and enhanced designability of hydrogel actuators. Adv. Func. Mater. 28(19), 1800514 (2018)10.1002/adfm.201800514 ↗
52. D.W. McOwen, S. Xu, Y. Gong, Y. Wen, G.L. Godbey, J.E. Gritton, T.R. Hamann, J. Dai, G.T. Hitz, L. Hu and E.D. Wachsman: 3D-Printing Electrolytes for Solid-State Batteries. Adv Mater. 30(18), e1707132 (2018).10.1002/adma.201707132 ↗
53. M. Cheng, R. Deivanayagam, R. Shahbazian-Yassar, 3D printing of electrochemical energy storage devices: a review of printing techniques and electrode/electrolyte architectures. Batteries Supercaps 3(2), 130 (2020)10.1002/batt.201900130 ↗
54. Y. Zhang, T. Ji, S. Hou, L. Zhang, Y. Shi, J. Zhao, X. Xu, All-printed solid-state substrate-versatile and high-performance micro-supercapacitors for in situ fabricated transferable and wearable energy storage via multi-material 3D printing. J. Power Sources 403, 109 (2018)10.1016/j.jpowsour.2018.09.096 ↗
55. C. Liu, N. Huang, F. Xu, J. Tong, Z. Chen, X. Gui, Y. Fu, C. Lao, 3D printing technologies for flexible tactile sensors toward wearable electronics and electronic skin. Polymers 10(6), 629 (2018)10.3390/polym10060629 ↗
56. S. Chen, T. Huang, H. Zuo, S. Qian, Y. Guo, L. Sun, D. Lei, Q. Wu, B. Zhu, C. He, A single integrated 3D-printing process customizes elastic and sustainable triboelectric nanogenerators for wearable electronics. Adv. Func. Mater. 28(46), 1805108 (2018)10.1002/adfm.201805108 ↗
57. X.-Y. Yin, Y. Zhang, X. Cai, Q. Guo, J. Yang, Z.L. Wang, 3D printing of ionic conductors for high-sensitivity wearable sensors. Mater. Horiz. 6(4), 767 (2019)10.1039/C8MH01398E ↗
58. I. Gibson, D. Rosen, B. Stucker, M. Khorasani, Additive Manufacturing Technologies (Springer, New York, 2014)
59. J.A. Lewis, J.E. Smay, J. Stuecker, J. Cesarano, Direct ink writing of three-dimensional ceramic structures. J. Am. Ceram. Soc. 89(12), 3599 (2006)10.1111/j.1551-2916.2006.01382.x ↗
60. P. Jiang, Z. Ji, X. Zhang, Z. Liu, X. Wang, Recent advances in direct ink writing of electronic components and functional devices. Progress Addit. Manufact. 3(1–2), 65 (2018)10.1007/s40964-017-0035-x ↗
61. Y. Jiang, J. Plog, A.L. Yarin, Y. Pan, Direct ink writing of surface-modified flax elastomer composites. Composit. B Eng. 194, 108061 (2020)10.1016/j.compositesb.2020.108061 ↗
62. Y. Jiang, A.L. Yarin, Y. Pan, Printable highly transparent natural fiber composites. Mater. Lett. 277, 128290 (2020)10.1016/j.matlet.2020.128290 ↗
63. J.E. Smay, J. Cesarano, J.A. Lewis, Colloidal inks for directed assembly of 3-D periodic structures. Langmuir 18(14), 5429 (2002)10.1021/la0257135 ↗
64. Y.-Y. Li, L.-T. Li, B. Li, Direct ink writing of special-shaped structures based on TiO2 inks. Mod. Phys. Lett. B 30(11), 1650212 (2016)10.1142/S0217984916502122 ↗
65. K.S. Boparai, R. Singh, H. Singh, Development of rapid tooling using fused deposition modeling: a review. Rapid Prototyp. J. 22, 281–299 (2016)10.1108/RPJ-04-2014-0048 ↗
66. O.A. Mohamed, S.H. Masood, J.L. Bhowmik, Optimization of fused deposition modeling process parameters: a review of current research and future prospects. Adv. Manufact. 3(1), 42 (2015)10.1007/s40436-014-0097-7 ↗
67. S.H. Ahn, M. Montero, D. Odell, S. Roundy, P.K. Wright, Anisotropic material properties of fused deposition modeling ABS. Rapid Prototyp. J. 8, 248–257 (2002)10.1108/13552540210441166 ↗
68. O.S. Carneiro, A. Silva, R. Gomes, Fused deposition modeling with polypropylene. Mater. Des. 83, 768 (2015)10.1016/j.matdes.2015.06.053 ↗
69. R. Guo, Z. Ren, H. Bi, M. Xu, L. Cai, Electrical and thermal conductivity of polylactic acid (PLA)-based biocomposites by incorporation of nano-graphite fabricated with fused deposition modeling. Polymers 11(3), 549 (2019)10.3390/polym11030549 ↗
70. A. Maurel, M. Armand, S. Grugeon, B. Fleutot, C. Davoisne, H. Tortajada, M. Courty, S. Panier, L. Dupont, Poly (ethylene oxide)−LiTFSI solid polymer electrolyte filaments for fused deposition modeling three-dimensional printing. J. Electrochem. Soc. 167(7), 070536 (2020)10.1149/1945-7111/ab7c38 ↗
71. C. Zhou, Y. Chen, Z. Yang, B. Khoshnevis, Digital material fabrication using mask-image-projection-based stereolithography. Rapid Prototyp. J. 19, 153 (2013)10.1108/13552541311312148 ↗
72. J.Z. Manapat, Q. Chen, P. Ye, R.C. Advincula, 3D printing of polymer nanocomposites via stereolithography. Macromol. Mater. Eng. 302(9), 1600553 (2017)10.1002/mame.201600553 ↗
73. D. Han, Z. Lu, S.A. Chester, H. Lee, Micro 3D printing of a temperature-responsive hydrogel using projection micro-stereolithography. Sci. Rep. 8(1), 1 (2018)
74. P.J. Bártolo, Stereolithography: Materials, Processes and Applications (Springer Science & Business Media, Berlin, 2011)10.1007/978-0-387-92904-0 ↗
75. R. Hague, S. Mansour, N. Saleh, R. Harris, Materials analysis of stereolithography resins for use in rapid manufacturing. J. Mater. Sci. 39(7), 2457 (2004)10.1023/B:JMSC.0000020010.73768.4a ↗
76. W. Liu, Z. Chen, G. Zhou, Y. Sun, H.R. Lee, C. Liu, H. Yao, Z. Bao, Y. Cui, 3D porous sponge-inspired electrode for stretchable lithium-ion batteries. Adv. Mater. 28(18), 3578 (2016)10.1002/adma.201505299 ↗
77. H. Li, D. Wu, J. Wu, L.Y. Dong, Y.J. Zhu, X. Hu, Flexible, high-wettability and fire-resistant separators based on hydroxyapatite nanowires for advanced lithium-ion batteries. Adv. Mater. 29(44), 1703548 (2017)10.1002/adma.201703548 ↗
78. L. Xu, J. Li, W. Deng, H. Shuai, S. Li, Z. Xu, J. Li, H. Hou, H. Peng, G. Zou, Garnet solid electrolyte for advanced all-solid-state Li batteries. Adv. Energy Mater. 11(2), 2000648 (2021)10.1002/aenm.202000648 ↗
79. D. Song, C. Xu, Y. Chen, J. He, Y. Zhao, P. Li, W. Lin, F. Fu, Enhanced thermal and electrochemical properties of PVDF-HFP/PMMA polymer electrolyte by TiO2 nanoparticles. Solid State Ionics 282, 31 (2015)10.1016/j.ssi.2015.09.017 ↗
80. A.J. Blake, R.R. Kohlmeyer, J.O. Hardin, E.A. Carmona, B. Maruyama, J.D. Berrigan, H. Huang, M.F. Durstock, 3D printable ceramic-polymer electrolytes for flexible high-performance Li-ion batteries with enhanced thermal stability. Adv. Energy Mater. (2017). https://doi.org/10.1002/aenm.20160292010.1002/aenm.201602920 ↗
81. M. Cheng, A. Ramasubramanian, M.G. Rasul, Y. Jiang, Y. Yuan, T. Foroozan, R. Deivanayagam, M. Tamadoni Saray, R. Rojaee, B. Song, Direct ink writing of polymer composite electrolytes with enhanced thermal conductivities. Adv. Funct. Mater. 31(4), 2006683 (2021)10.1002/adfm.202006683 ↗
82. L.Y. Zhou, J. Fu, Y. He, A review of 3D printing technologies for soft polymer materials. Adv. Funct. Mater. (2020). https://doi.org/10.1002/adfm.20200018710.1002/adfm.202000187 ↗
83. M. Cheng, Y. Jiang, W. Yao, Y. Yuan, R. Deivanayagam, T. Foroozan, Z. Huang, B. Song, R. Rojaee, T. Shokuhfar, Y. Pan, J. Lu, R. Shahbazian-Yassar, Elevated-temperature 3D printing of hybrid solid-state electrolyte for Li-ion batteries. Adv Mater. 30(39), e1800615 (2018)10.1002/adma.201800615 ↗
84. Y. Liu, Y. Qiao, Y. Zhang, Z. Yang, T. Gao, D. Kirsch, B. Liu, J. Song, B. Yang, L. Hu, 3D printed separator for the thermal management of high-performance Li metal anodes. Energy Storage Mater. 12, 197 (2018)10.1016/j.ensm.2017.12.019 ↗
85. P. Chang, H. Mei, S. Zhou, K.G. Dassios, L. Cheng, 3D printed electrochemical energy storage devices. J. Mater. Chem. A. 7(9), 4230 (2019)10.1039/C8TA11860D ↗
86. S.-M. Park, Y.-S. Lee, D.-W. Kim, High-performance lithium-ion polymer cells assembled with composite polymer electrolytes based on core-shell structured SiO2 particles containing poly(lithium acrylate) in the shell. J. Electrochem. Soc. 162(2), A3071 (2014)10.1149/2.0081502jes ↗
87. N.W.S. Pinargote, A. Smirnov, N. Peretyagin, A. Seleznev, P. Peretyagin, Direct ink writing technology (3D printing) of graphene-based ceramic nanocomposites: a review. Nanomaterials 10(7), 1300 (2020)10.3390/nano10071300 ↗
88. X. Yu, A. Manthiram, A review of composite polymer-ceramic electrolytes for lithium batteries. Energy Storage Mater. 34, 282 (2021)10.1016/j.ensm.2020.10.006 ↗
89. P. Yao, H. Yu, Z. Ding, Y. Liu, J. Lu, M. Lavorgna, J. Wu, X. Liu, Review on polymer-based composite electrolytes for lithium batteries. Front Chem. 7, 522 (2019)10.3389/fchem.2019.00522 ↗
90. R. Rojaee, S. Cavallo, S. Mogurampelly, B.K. Wheatle, V. Yurkiv, R. Deivanayagam, T. Foroozan, M.G. Rasul, S. Sharifi-Asl, A.H. Phakatkar, Highly-cyclable room-temperature phosphorene polymer electrolyte composites for Li metal batteries. Adv. Func. Mater. 30(32), 1910749 (2020)10.1002/adfm.201910749 ↗
91. Z. Xue, D. He, X. Xie, Poly(ethylene oxide)-based electrolytes for lithium-ion batteries. J. Mater. Chem A. 3(38), 19218 (2015)10.1039/C5TA03471J ↗
92. Y. He, S. Chen, L. Nie, Z. Sun, X. Wu, W. Liu, Stereolithography three-dimensional printing solid polymer electrolytes for all-solid-state lithium metal batteries. Nano Lett. 20(10), 7136 (2020)10.1021/acs.nanolett.0c02457 ↗
93. E. Cha, D.R. Macfarlane, M. Forsyth, C. Lee, Ionic conductivity studies of polymeric electrolytes containing lithium salt with plasticizer. Electrochim. Acta 50(2–3), 335 (2004)10.1016/j.electacta.2004.01.101 ↗
94. Y. Kumar, S. Hashmi, G. Pandey, Lithium ion transport and ion–polymer interaction in PEO based polymer electrolyte plasticized with ionic liquid. Solid State Ion. 201(1), 73 (2011)10.1016/j.ssi.2011.08.010 ↗
95. K. Vignarooban, M. Dissanayake, I. Albinsson, B.-E. Mellander, Effect of TiO2 nano-filler and EC plasticizer on electrical and thermal properties of poly (ethylene oxide)(PEO) based solid polymer electrolytes. Solid State Ion. 266, 25 (2014)10.1016/j.ssi.2014.08.002 ↗
96. A.E. Jakus, E.B. Secor, A.L. Rutz, S.W. Jordan, M.C. Hersam, R.N. Shah, Three-dimensional printing of high-content graphene scaffolds for electronic and biomedical applications. ACS Nano 9(4), 4636 (2015)10.1021/acsnano.5b01179 ↗
97. C. Wang, K. Fu, S.P. Kammampata, D.W. McOwen, A.J. Samson, L. Zhang, G.T. Hitz, A.M. Nolan, E.D. Wachsman, Y. Mo, V. Thangadurai, L. Hu, Garnet-type solid-state electrolytes: materials, interfaces, and batteries. Chem Rev. 120(10), 4257 (2020)10.1021/acs.chemrev.9b00427 ↗
98. S. Zekoll, C. Marriner-Edwards, A.K.O. Hekselman, J. Kasemchainan, C. Kuss, D.E.J. Armstrong, D. Cai, R.J. Wallace, F.H. Richter, J.H.J. Thijssen, P.G. Bruce, Hybrid electrolytes with 3D bicontinuous ordered ceramic and polymer microchannels for all-solid-state batteries. Energy Environ. Sci. 11(1), 185 (2018)10.1039/C7EE02723K ↗
99. D.P. Dubal, N.R. Chodankar, D.H. Kim, P. Gomez-Romero, Towards flexible solid-state supercapacitors for smart and wearable electronics. Chem. Soc. Rev. 47(6), 2065 (2018)10.1039/C7CS00505A ↗
100. C. Meng, C. Liu, L. Chen, C. Hu, S. Fan, Highly flexible and all-solid-state paperlike polymer supercapacitors. Nano Lett. 10(10), 4025 (2010)10.1021/nl1019672 ↗