The effect of titanium and silicon addition on phase equilibrium and mechanical properties of CoCrFeMnNi-based high entropy alloy
Source abstract
Abstract
Abstract The effects of Ti and Si addition on the phase equilibrium and mechanical properties of the equiatomic CoCrFeMnNi high entropy alloy (Cantor alloy) were investigated. The phase equilibrium at 1000 °C was determined from the result of X-ray diffraction and electron probe micro-analysis. Ti addition stabilizes the $$\sigma$$ phase, A12 phase and C14-Laves phase, while Si addition stabilizes the A13 phase. The phase relationships were represented by projection onto (Co, Fe, Mn, Ni)–Cr–X(Ti or Si) isothermal ternary cross-section at 1000 °C in Co–Cr–Fe–Mn–Ni–X senary system. Tensile tests were conducted on Cantor-based fcc single solid solution alloys with Ti or Si dissolution at room temperature. The 0.2% yield strength and ultimate tensile strength increased with either element addition. The Ti-added alloy showed higher strength than the Si-added alloy. The difference in ductility in the alloys is related to their strain hardening behavior in the higher strain range. Graphic abstract
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shum, C.H. Tsau, S.Y. Chang, Adv. Eng. Mater. 6(5), 299 (2004). https://doi.org/10.1002/adem.20030056710.1002/adem.200300567 ↗
2. B. Cantor, I. Chang, O. Knight, A.J.B. Vincent, Mater. Sci. Eng. A. 375–377, 213 (2004). https://doi.org/10.1016/j.msea.2003.10.25710.1016/j.msea.2003.10.257 ↗
3. F. Otto, A. Dlouhý, C. Somesen, H. Bei, G. Eggeler, E.P. George, Acta. Mater. 61(15), 5743 (2013). https://doi.org/10.1016/j.actamat.2013.06.01810.1016/j.actamat.2013.06.018 ↗
4. Z. Wu, H. Bei, G.M. Pharr, E.P. George, Acta. Mater. 81, 428 (2014). https://doi.org/10.1016/j.actamat.2014.08.02610.1016/j.actamat.2014.08.026 ↗
5. K. K. Tseng, C. C. Juan, S. Tso, H. C. Chen, C. W. Tsai, J. W. Yeh, Entropy. 21(1), 1 (2019) https://doi.org/10.3390/e2101001510.3390/e21010015 ↗
6. O.N. Senkov, G.B. Wilks, J.M. Scott, D.B. Miracle, Intermetallics 19(5), 698 (2011). https://doi.org/10.1016/j.intermet.2011.01.00410.1016/j.intermet.2011.01.004 ↗
7. O.N. Senkov, J.M. Scott, S.V. Senkova, D.B. Miracle, C.F. Woodward, J. Alloys Compd. 509(20), 6043 (2011). https://doi.org/10.1016/j.jallcom.2011.02.17110.1016/j.jallcom.2011.02.171 ↗
8. T. Yang, Y.L. Zhao, Y. Tong, Z.B. Jiao, J. Wei, J.X. Cai, X.D. Han, D. Chen, A. Hu, J.J. Kai, K. Lu, Y. Liu, C.T. Liu, Science 362, 933 (2018). https://doi.org/10.1126/science.aas881510.1126/science.aas8815 ↗
9. Z. Guo, A. Zhang, J. Han, J. Meng, J. Mater. Sci. 54, 5844–5851 (2019). https://doi.org/10.1007/s10853-018-03280-z10.1007/s10853-018-03280-z ↗
10. Z. Li, C.C. Tasan, K.G. Pradeep, D. Rabbe, Acta. Mater. 131, 323 (2017). https://doi.org/10.1016/j.actamat.2017.03.06910.1016/j.actamat.2017.03.069 ↗
11. P. Shi, W. Ren, T. Zheng, Z. Ren, X. Hou, J. Peng, P. Hum Y. Gao, Y. Zhong, P. K. Liaw, Nat. Commun. 10, 489 (2019). https://doi.org/10.1038/s41467-019-08460-210.1038/s41467-019-08460-2 ↗
12. B. Gludovatz, A. Hohenwarter, D. Catoor, E. H. Chamg. E. P. George, R. O. Rithie, Science. 345(6201), 1153 (2014). https://doi.org/10.1126/science.125458110.1126/science.1254581 ↗
13. G. Qin, Z. Li, R. Chen, H. Zheng, C. Fan, L. Wang, Y. Su, H. Ding, J. Guo, H. Fu, J. Mater. Res. 34(6), 1011 (2019). https://doi.org/10.1557/jmr.2018.46810.1557/jmr.2018.468 ↗
14. H. Shahmir, M. Nili-Ahmadabadi, A. Shadiee, M. Andrzejczuk, M. Lewandowska, T.G. Langdo, Mater. Sci. Eng. A. 725, 196 (2018). https://doi.org/10.1016/j.msea.2018.04.01410.1016/j.msea.2018.04.014 ↗
15. G. Qin, R. Chen, H. Zheng, H. Fang, L. Wang, Y. Su, J. Guo, H. Fu, J. Mater. Sci. Technol. 35(4), 578 (2019). https://doi.org/10.1016/j.jmst.2018.10.00910.1016/j.jmst.2018.10.009 ↗
16. C. Wang, T.H. Ki, Y.C. Li, J.S.H. Jang, C.H. Hsueh, Mater. Sci. Eng. A. 764(9), 138192 (2019). https://doi.org/10.1016/j.msea.2019.13819210.1016/j.msea.2019.138192 ↗
17. J.Y. He, W.H. Liu, H. Wang, Y. Wu, X.J. Liu, T.G. Nieh, Z.P. Liu, Acta. Mater. 62(1), 105 (2014). https://doi.org/10.1016/j.actamat.2013.09.03710.1016/j.actamat.2013.09.037 ↗
18. Z. Li, Acta. Mater. 164(1), 400 (2019). https://doi.org/10.1016/j.actamat.2018.10.05010.1016/j.actamat.2018.10.050 ↗
19. N.D. Stepanov, D.G. Shaysultanov, G.A. Salishchev, M.A. Tikhonovsky, E.E. Oleynik, A.S. Tortika, O.N. Senko, J. Alloys Compd. 628(15), 170 (2015). https://doi.org/10.1016/j.jallcom.2014.12.15710.1016/j.jallcom.2014.12.157 ↗
20. H. Okamoto, DESK Handbook: Phase diagram for Binary Alloys, 2nd edn. (ASM international, Ohio, 2010)
21. P. Villars, K. Cenzual, Pearson's Crystal Data - Crystal Structure Database for Inorganic Compounds (on DVD), Release 2014/15, ASM International, Materials Park
22. E. Haccuria, T. Crivits, P.C. Hayes, E. Jak, J. Am. Ceram. Soc. 99(2), 691 (2016). https://doi.org/10.1111/jace.1399110.1111/jace.13991 ↗
23. F. Otto, A. Dlouhý, K.G. Pradeep, M. Kuběnová, D. Raabe, G. Eggeler, E.P. George, Acta. Mater. 112, 40 (2016). https://doi.org/10.1016/j.actamat.2016.04.00510.1016/j.actamat.2016.04.005 ↗
24. M.V. Klimova, D.G. Shaysultanov, S.V. Zherebtsov, N.D. Stepanov, Mater. Sci. Eng. A. 748, 228 (2019). https://doi.org/10.1016/j.msea.2019.01.11210.1016/j.msea.2019.01.112 ↗
25. G. Laplanche, S. Berglund, C. Reinhart, A. Kostka, F. Fox, E.P. George, Acta. Mater. 161, 338 (2018). https://doi.org/10.1016/j.actamat.2018.09.04010.1016/j.actamat.2018.09.040 ↗
26. Z. Wu, H. Bei, F. Otto, G.M. Pharr, E.P. George, Intermetallics 46, 131 (2014). https://doi.org/10.1016/j.intermet.2013.10.02410.1016/j.intermet.2013.10.024 ↗
27. S. Ochiai, Y. Oya, T. Suzuki, Acta. Metall. 32(2), 289 (1984). https://doi.org/10.1016/0001-6160(84)90057-910.1016/0001-6160(84)90057-9 ↗
28. V. Raghavan, J. Phase. Equilibria. Diffus. 30(2), 199 (2009). https://doi.org/10.1007/s11669-009-9492-310.1007/s11669-009-9492-3 ↗
29. L. Peng, S. Takizawa, K. Ikeda, T. Horiuchi, S. Miura, Intermetallics 110, 106457 (2019). https://doi.org/10.1016/j.intermet.2019.03.02010.1016/j.intermet.2019.03.020 ↗
30. F. Stein, M. Palm, G. Sauthoff, Intermetallics 12, 713 (2004). https://doi.org/10.1016/j.intermet.2004.02.01010.1016/j.intermet.2004.02.010 ↗
31. J.H. Zhu, C.T. Liu, L.M. Pike, P.K. Liaw, Intermetallics 10, 579 (2002). https://doi.org/10.1016/S0966-9795(02)00030-410.1016/S0966-9795(02)00030-4 ↗
32. T. Yamanouchi, S. Miura, Mater. Trans. 59(4), 546 (2018). https://doi.org/10.2320/matertrans.MJ20160410.2320/matertrans.MJ201604 ↗
33. W.B. Pearson, The Crystal Chemistry and Physics of Metals and Alloys, 1st edn. (Wiley, New York, 1972), p. 151
34. P. Villars, A. Prince, H. Okamoto. Handbook of Ternary Alloy Phase Diagrams, vol. 7, 1st edn. (ASM international, Ohio, 1995)
35. P. Villars, A. Prince, H. Okamoto. Handbook of Ternary Alloy Phase Diagrams, vol. 8, 1st edn. (ASM international, Ohio, 1995)
36. C. Zhou, C. Guo, C. Li, Z. Du, CALPHAD 63, 61 (2018). https://doi.org/10.1016/j.calphad.2018.08.01110.1016/j.calphad.2018.08.011 ↗
37. Y.H. Tan, H.H. Xu, Y. Du, Trans. Nonferrous Met. Soc. China. 17(4), 711 (2007). https://doi.org/10.1016/S1003-6326(07)60161-710.1016/S1003-6326(07)60161-7 ↗
38. L.I. Duarte, U.E. Klotz, C. Leienbach, M. Palm, F. Stein, J.F. Löffler, Intermetallics 18(3), 374 (2010). https://doi.org/10.1016/j.intermet.2009.08.00810.1016/j.intermet.2009.08.008 ↗
39. J.M. Joubert, Prog. Mater. Sci. 53, 528 (2008). https://doi.org/10.1016/j.pmatsci.2007.04.00110.1016/j.pmatsci.2007.04.001 ↗
40. B. Seiser, R. Drautz, D.G. Pettifor, Acta. Mater. 59, 749 (2011). https://doi.org/10.1016/j.actamat.2010.10.01310.1016/j.actamat.2010.10.013 ↗
41. C.T. Sims, JOM 21(12), 27 (1969). https://doi.org/10.1007/BF0337880010.1007/BF03378800 ↗
42. P. Villars, A. Prince, H. Okamoto. Handbook of Ternary Alloy Phase Diagrams, vol. 6, 1st edn. (ASM international, Ohio, 1995)
43. L.Y. Chen, C.H. Li, K. Wang, H.Q. Dong, X.G. Lu, W.Z. Ding, CALPHAD 33(4), 658 (2009). https://doi.org/10.1016/j.calphad.2009.08.00210.1016/j.calphad.2009.08.002 ↗
44. X. Liu, M. Lin, S. Yang, J. Ruan, C. Wang, J. Phase Equilibria. Diffus. 35, 334 (2014). https://doi.org/10.1007/s11669-014-0279-910.1007/s11669-014-0279-9 ↗
45. A. Walnsch, M.J. Kriegel, O. Fabrichnaya, A. Leineweber, J. Phase Equilibria. Diffus. 41, 457 (2020). https://doi.org/10.1007/s11669-020-00804-610.1007/s11669-020-00804-6 ↗
46. F. Otto, Y. Yang, H. Bei, E.P. George, Acta Mater. 61, 2628 (2013). https://doi.org/10.1016/j.actamat.2013.01.04210.1016/j.actamat.2013.01.042 ↗
47. L. Zeng, L. Liu, S. Huang, L. Zhang, CALPHAD 58, 58 (2017). https://doi.org/10.1016/j.calphad.2017.05.00610.1016/j.calphad.2017.05.006 ↗
48. K.P. Gupta, J. Phase Equilibria. 22, 52 (2001). https://doi.org/10.1361/10549710177033929210.1361/105497101770339292 ↗
49. M. Tsai, A. Fan, H. Wang, J. Alloys. Compd. 695, 1479 (2017). https://doi.org/10.1016/j.jallcom.2016.10.28610.1016/j.jallcom.2016.10.286 ↗
50. H. Hughes, D.T. Llewelyn, J. Iron. Steel. Inst. 192, 170 (1959)
51. P. Villars, A. Prince, H. Okamoto. Handbook of Ternary Alloy Phase Diagrams, vol. 10, 1st edn. (ASM international, Ohio, 1995)
52. B.S. Murty, J.W. Yeh, S. Ranganathan, High Entropy Alloys, 1st edn. (Elsevier, London, 2014), pp. 13–35
53. J.W. Yeh, JOM 65(12), 1759 (2013). https://doi.org/10.1007/s11837-013-0761-610.1007/s11837-013-0761-6 ↗
54. M. H. Tsai, R. C. Tsai, T. Chang, W. F. Huang, Metals 9, 247 (2019) https://doi.org/10.3390/met902024710.3390/met9020247 ↗
55. T. Nishizawa, Thermodynamics of Microstructures, 1st edn. (ASM international, Ohio, 2010), pp. 67–71
56. J. P. Hirth, J. Lothe. Theory of Dislocations, 3rd. edn. (Cambridge University Press, New York, 2017), pp.522–525, 606–607
57. I. Toda-Caraballo, J.S. Wróbel, S.L. Dudarev, D. Nguyen-Manh, P.E.J. Rivera-Díaz-del-Castillo, Acta Mater. 97(15), 156 (2015). https://doi.org/10.1016/j.actamat.2015.07.01010.1016/j.actamat.2015.07.010 ↗
58. C. Varvenne, W.A. Curtin, Scr. Mater. 138, 92 (2017). https://doi.org/10.1016/j.scriptamat.2017.05.03510.1016/j.scriptamat.2017.05.035 ↗
59. M. Agustianingrum, S. Yoshida, B. Tsuji, N. Park, J. Alloys Compd. 781, 866 (2019). https://doi.org/10.1016/j.jallcom.2018.12.06510.1016/j.jallcom.2018.12.065 ↗
60. S. Yoshida, T. Ikeuchi, T. Bhattacharjee, Y. Bai, A. Shibata, N. Tsuji, Acta Mater. 171, 201 (2019). https://doi.org/10.1016/j.actamat.2019.04.01710.1016/j.actamat.2019.04.017 ↗
61. R.L. Fleischer, Acta metall. 11(3), 203 (1963). https://doi.org/10.1016/0001-6160(63)90213-X10.1016/0001-6160(63)90213-X ↗
62. R. Labusch, Phys. Status Solidi. 41(2), 659 (1970). https://doi.org/10.1002/pssb.1970041022110.1002/pssb.19700410221 ↗
63. Q. Ding, Y. Zhang, X. Chen, X. Fu, D. Chen, S. Chen, L. Gu, F. Wei, H. Bei, Y. Gao, M. Wen, J. Li, Z. Zhang, T. Zhum R. O. Ritchie, Q. Yu, Nature 574, 223(2019) https://doi.org/10.1038/s41586-019-1617-110.1038/s41586-019-1617-1 ↗
64. X. Huang, L. Liu, X. Duan, W. Liao, J. Huang, H. Sun, C. Yu, Mater. Des. 202, 109560 (2021). https://doi.org/10.1016/j.matdes.2021.10956010.1016/j.matdes.2021.109560 ↗
65. G. Laplanche, A. Kostka, O.M. Horst, G. Eggeler, E.P. George, Acta Mater. 118, 152 (2016). https://doi.org/10.1016/j.actamat.2016.07.03810.1016/j.actamat.2016.07.038 ↗
66. S.-H. Joo, H. Kato, M.J. Jang, J. Moon, C.W. Tsai, J.W. Yeh, H.S. Kim, Mater. Sci. Eng. A. 689, 122 (2017). https://doi.org/10.1016/j.msea.2017.02.04310.1016/j.msea.2017.02.043 ↗
67. H. Chang, T.W. Zhang, S.G. Ma, D. Zhao, R.L. Xiong, T. Wang, Z.Q. Li, Z.H. Wang, Mater. Des. 197, 109202 (2021). https://doi.org/10.1016/j.matdes.2020.10920210.1016/j.matdes.2020.109202 ↗
68. X. Tian, Y. Zhang, Mater. Sci. Eng. A. 516(1–2), 73 (2009). https://doi.org/10.1016/j.msea.2009.02.03110.1016/j.msea.2009.02.031 ↗
69. C.L. Yang, Z.J. Zhang, T. Cai, P. Zhang, Z.F. Zhang, Sci. Rep. 5, 15532 (2015). https://doi.org/10.1038/srep1553210.1038/srep15532 ↗