Shear and Serviceability Reliability of Recycled Aggregate Concrete Beams

1. Kou, S. C.; Poon, C. S.; and Chan, D., “Influence of Fly Ash as Cement Replacement on the Properties of Recycled Aggregate Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 19, No. 9, 2007, pp. 709-717. doi: 10.1061/(ASCE)0899-1561(2007)19:9(709)10.1061/(ASCE)0899-1561(2007)19:9(709) ↗

2. Ann, K. Y.; Moon, H. Y.; Kim, Y. B.; and Ryou, J., “Durability of Recycled Aggregate Concrete Using Pozzolanic Materials,” Waste Management, New York, NY, V. 28, No. 6, 2008, pp. 993-999. doi: 10.1016/j.wasman.2007.03.00310.1016/j.wasman.2007.03.003 ↗

3. Tangchirapat, W.; Buranasing, R.; and Jaturapitakkul, C., “Use of High Fineness Fly Ash to Improve Properties of Recycled Aggregate Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 22, No. 6, 2010, pp. 565-571. doi: 10.1061/(ASCE)MT.1943-5533.000005410.1061/(ASCE)MT.1943-5533.0000054 ↗

4. Somna, R.; Jaturapitakkul, C.; Chalee, W.; and Rattanachu, P., “Effect of the Water to Binder Ratio and Ground Fly Ash on Properties of Recycled Aggregate Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 24, No. 1, 2012, pp. 16-22. doi: 10.1061/(ASCE)MT.1943-5533.000036010.1061/(ASCE)MT.1943-5533.0000360 ↗

5. Ahmed, S. F. U., “Properties of Concrete Containing Construction and Demolition Wastes and Fly Ash,” Journal of Materials in Civil Engineering, ASCE, V. 25, No. 12, 2013, pp. 1864-1870. doi: 10.1061/(ASCE)MT.1943-5533.000076310.1061/(ASCE)MT.1943-5533.0000763 ↗

6. Sunayana, S., and Barai, S. V., “Recycled Aggregate Concrete Incorporating Fly Ash: Comparative Study on Particle Packing and Conventional Method,” Construction and Building Materials, V. 156, 2017, pp. 376-386. doi: 10.1016/j.conbuildmat.2017.08.13210.1016/j.conbuildmat.2017.08.132 ↗

7. Arezoumandi, M.; Smith, A.; Volz, J. S.; and Khayat, K. H., “An Experimental Study on Shear Strength of Reinforced Concrete Beams with 100% Recycled Concrete Aggregate,” Construction and Building Materials, V. 53, 2014, pp. 612-620. doi: 10.1016/j.conbuildmat.2013.12.01910.1016/j.conbuildmat.2013.12.019 ↗

8. Choi, W. C., and Yun, H. D., “Shear Strength of Reinforced Recycled Aggregate Concrete Beams Without Shear Reinforcements,” Journal of Civil Engineering and Management, V. 23, 2017, pp. 76-84.10.3846/13923730.2014.976257 ↗

9. Etxeberria, M.; Mari, A. R.; and Vázquez, E., “Recycled Aggregate Concrete as Structural Material,” Materials and Structures, V. 40, No. 5, 2007, pp. 529-541. doi: 10.1617/s11527-006-9161-510.1617/s11527-006-9161-5 ↗

10. Fathifazl, G.; Razaqpur, A. G.; Isgor, O. B.; Abbas, A.; Fournier, B.; and Foo, S., “Shear Strength of Reinforced Recycled Concrete Beams Without Stirrups,” Magazine of Concrete Research, V. 61, No. 7, 2009, pp. 477-490. doi: 10.1680/macr.2008.61.7.47710.1680/macr.2008.61.7.477 ↗

11. Rahal, K. N., and Alrefaei, Y. T., “Shear Strength of Longitudinally Reinforced Recycled Aggregate Concrete Beams,” Engineering Structures, V. 145, 2017, pp. 273-282. doi: 10.1016/j.engstruct.2017.05.02810.1016/j.engstruct.2017.05.028 ↗

12. Ignjatović, I. S.; Marinković, S. B.; and Tošić, N., “Shear Behaviour of Recycled Aggregate Concrete Beams with and without Shear Reinforcement,” Engineering Structures, V. 141, 2017, pp. 386-401. doi: 10.1016/j.engstruct.2017.03.02610.1016/j.engstruct.2017.03.026 ↗

13. Ajdukiewicz, A. B., and Kliszczewicz, A. T., “Comparative Tests of Beams and Columns Made of Recycled Aggregate Concrete and Natural Aggregate Concrete,” Journal of Advanced Concrete Technology, V. 5, No. 2, 2007, pp. 259-273. doi: 10.3151/jact.5.25910.3151/jact.5.259 ↗

14. Sato, R.; Maruyama, I.; Sogabe, T.; and Sogo, M., “Flexural Behavior of Reinforced Recycled Concrete Beams,” Journal of Advanced Concrete Technology, V. 5, No. 1, 2007, pp. 43-61. doi: 10.3151/jact.5.4310.3151/jact.5.43 ↗

15. Fathifazl, G.; Razaqpur, A. G.; Isgor, O. B.; Abbas, A.; Fournier, B.; and Foo, S., “Flexural Performance of Steel-Reinforced Recycled Concrete Beams,” ACI Structural Journal, V. 106, No. 6, Nov.-Dec. 2009, pp. 858-867.10.14359/51663187 ↗

16. Kang, T. H. K.; Kim, W.; Kwak, Y. K.; and Hong, S. G., “Flexural Testing of Reinforced Concrete Beams with Recycled Concrete Aggregates,” ACI Structural Journal, V. 111, No. 3, May-June 2014, pp. 607-616. doi: 10.14359/5168662210.14359/51686622 ↗

17. Knaack, A. M., and Kurama, Y. C., “Behavior of Reinforced Concrete Beams with Recycled Concrete Coarse Aggregates,” Journal of Structural Engineering, ASCE, V. 141, No. 3, 2015, p. B4014009 doi: 10.1061/(ASCE)ST.1943-541X.000111810.1061/(ASCE)ST.1943-541X.0001118 ↗

18. Ignjatović, I. S.; Marinković, S. B.; Mišković, Z. M.; and Savić, A. R., “Flexural Behavior of Reinforced Recycled Aggregate Concrete Beams under Short-Term Loading,” Materials and Structures, V. 46, No. 6, 2013, pp. 1045-1059. doi: 10.1617/s11527-012-9952-910.1617/s11527-012-9952-9 ↗

19. Arezoumandi, M.; Smith, A.; Volz, J. S.; and Khayat, K. H., “An Experimental Study on Flexural Strength of Reinforced Concrete Beams with 100% Recycled Concrete Aggregate,” Engineering Structures, V. 88, 2015, pp. 154-162. doi: 10.1016/j.engstruct.2015.01.04310.1016/j.engstruct.2015.01.043 ↗

20. Sunayana, S., and Barai, S. V., “Flexural Performance and Tension-Stiffening Evaluation of Reinforced Concrete Beam Incorporating Recycled Aggregate and Fly Ash,” Construction and Building Materials, V. 174, 2018, pp. 210-223. doi: 10.1016/j.conbuildmat.2018.04.07210.1016/j.conbuildmat.2018.04.072 ↗

21. Sadati, S.; Arezoumandi, M.; Khayat, K. H.; and Volz, J. S., “Shear Performance of Reinforced Concrete Beams Incorporating Recycled Concrete Aggregate and High-Volume Fly Ash,” Journal of Cleaner Production, V. 115, 2016, pp. 284-293. doi: 10.1016/j.jclepro.2015.12.01710.1016/j.jclepro.2015.12.017 ↗

22. Sunayana, S., and Barai, S. V., , “Shear Behavior of Fly-Ash-Incorporated Recycled Aggregate Concrete Beams,” ACI Structural Journal, V. 117, No. 1, Jan. 2020, pp. 289-303. doi: 10.14359/5172020010.14359/51720200 ↗

23. Pacheco, J.; De Brito, J.; Chastre, C.; and Evangelista, L., “Experimental Investigation on the Variability of the Main Mechanical Properties of Concrete Produced with Coarse Recycled Concrete Aggregates,” Construction and Building Materials, V. 201, 2019, pp. 110-120. doi: 10.1016/j.conbuildmat.2018.12.20010.1016/j.conbuildmat.2018.12.200 ↗

24. Pacheco, J.; De Brito, J.; Chastre, C.; and Evangelista, L., “Uncertainty Models of Reinforced Concrete Beams in Bending: Code Comparison and Recycled Aggregate Incorporation,” Journal of Structural Engineering, ASCE, V. 145, No. 4, 2019, p. 04019013 doi: 10.1061/(ASCE)ST.1943-541X.000229610.1061/(ASCE)ST.1943-541X.0002296 ↗

25. Pacheco, J.; De Brito, J.; Chastre, C.; and Evangelista, L., “Uncertainty of Shear Resistance Models: Influence of Recycled Concrete Aggregate on Beams with and without Shear Reinforcement,” Engineering Structures, V. 204, 2020, p. 109905 doi: 10.1016/j.engstruct.2019.10990510.1016/j.engstruct.2019.109905 ↗

26. Stewart, M. G., “Serviceability Reliability Analysis of Reinforced Concrete Structures,” Journal of Structural Engineering, ASCE, V. 122, No. 7, 1996, pp. 794-803. doi: 10.1061/(ASCE)0733-9445(1996)122:7(794)10.1061/(ASCE)0733-9445(1996)122:7(794) ↗

27. ACI Committee 318, “Building Code Requirements for Structural Concrete and Commentary (ACI 318-11),” American Concrete Institute, Farmington Hills, MI, 2011.

28. EN-1992-1-1, “Eurocode 2 –Design of Concrete Structures (2008) Part 1–1: General Rules and Rules for Buildings,” British Standard Institution, London, UK, 2004.

29. FIB, “FIB Model Code for Concrete Structures, 2010, Ernst and Sohn.

30. IS 456, “Plain and Reinforced Concrete Code of Practice,” Bureau of Indian Standards, New Delhi, India, 2000.

31. Holický, M.; Retief, J. V.; and Sýkora, M., “Assessment of Model Uncertainties for Structural Resistance,” Probabilistic Engineering Mechanics, V. 45, 2016, pp. 188-197. doi: 10.1016/j.probengmech.2015.09.00810.1016/j.probengmech.2015.09.008 ↗

32. Dithinde, M.; Phoon, K. K.; De Wet, M.; and Retief, J. V., “Characterization of Model Uncertainty in the Static Pile Design Formula,” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, V. 137, No. 1, 2011, pp. 70-85. doi: 10.1061/(ASCE)GT.1943-5606.000040110.1061/(ASCE)GT.1943-5606.0000401 ↗

33. Mirza, S. A., and MacGregor, J. G., “Probabilistic Study of Strength of Reinforced Concrete Members,” Canadian Journal of Civil Engineering, V. 9, No. 3, 1982, pp. 431-448. doi: 10.1139/l82-05310.1139/l82-053 ↗

34. Xiao, J.; Li, J.; and Zhang, C., “On Statistical Characteristics of the Compressive Strength of Recycled Aggregate Concrete,” Structural Concrete, V. 6, No. 4, 2005, pp. 149-153. doi: 10.1680/stco.2005.6.4.14910.1680/stco.2005.6.4.149 ↗

35. Ellingwood, B.; Galambos, T. V.; MacGregor, J. G.; and Cornell, A. C., Development of a Probability-Based Load Criterion for American National Standard A58, National Bureau of Standards Special Publication No. 577, National Bureau of Standards, Washington, DC, 1980.10.6028/NBS.SP.577 ↗

36. Ranganathan, R., Structural Reliability Analysis and Design, Jaico Publishing House, 1990.

37. Lu, R.; Luo, Y.; and Conte, J. P., “Reliability Evaluation of Reinforced Concrete Beams,” Structural Safety, V. 14, No. 4, 1994, pp. 277-298. doi: 10.1016/0167-4730(94)90016-710.1016/0167-4730(94)90016-7 ↗

38. AS 3600-1994, “Concrete Structures,” Standards Association of Australia, Sydney, Australia, 1994.

39. Gilbert, R. I., Time Effects in Concrete Structures, 1988, Elsevier, The Netherlands.

40. Bažant, Z. P., and Wendner, R., “RILEM Draft Recommendation: TC-242-MDC Multi-Decade Creep and Shrinkage of Concrete: Material Model and Structural Analysis,” Materials and Structures, V. 48, No. 4, 2015, pp. 753-770. doi: 10.1617/s11527-014-0485-210.1617/s11527-014-0485-2 ↗

41. Bažant, Z. P., and Kim J. K., “Improved Prediction Model for Time-Dependent Deformation of Concrete, Part 2: Basic Creep,” Materials and Structures, 1991, V. 24, pp. 409-421. (errata (1993), 26, 574 pp.10.1007/BF02472014 ↗

42. Ellingwood, B., and Culver, C., “Analysis of Live Loads in Office Buildings,” Journal of Structural Engineering, V. 103, 1977, pp. 1551-1560.10.1061/JSDEAG.0004693 ↗

43. Ellingwood, B., “Reliability Basis of Load and Resistance Factors for Reinforced Concrete Design,” NBS Building Science Series, 110, 1978, National Bureau of Standards, Washington, DC.10.6028/NBS.BSS.110 ↗

44. Pham, L., “Load Combinations and Probabilistic Load Models for Limit State Codes,” Civil Engineering Transactions, V. 27, 1985, pp. 62-67.

45. Mirza, S. A.; MacGregor, J. G.; and Hatzinikolas, M., “Statistical Descriptions of Strength of Concrete,” Journal of the Structural Division, V. 105, No. 6, 1979, pp. 1021-1037. doi: 10.1061/JSDEAG.000516110.1061/JSDEAG.0005161 ↗

46. Bažant, Z. P., and Kim, J. K., “Improved Prediction Model for Time-Dependent Deformation of Concrete, Part 3: Creep at Drying,” Materials and Structures, V. 25, No. 1, 1992, pp. 21-28. doi: 10.1007/BF0247220910.1007/BF02472209 ↗

47. Karshenas S., and Ayoub, H., “Analysis of Concrete Construction Live Loads on Newly Poured Slabs,” Journal of Structural Engineering, 1994, V. 120, pp. 1525-1542 (see also 1543-1562).10.1061/(ASCE)0733-9445(1994)120:5(1525) ↗

48. Choi, E. C. C., “Live Load Model for Office Buildings,” Structural Engineering, V. 67, 1989, pp. 421-437.

49. Choi, E. C. C., “Extraordinary Live Load in Office Buildings,” Journal of Structural Engineering, ASCE, V. 117, No. 11, 1991, pp. 3216-3227. doi: 10.1061/(ASCE)0733-9445(1991)117:11(3216)10.1061/(ASCE)0733-9445(1991)117:11(3216) ↗

50. Harris, M. E.; Corotis, R. B.; and Bova, C. J., “Area-Dependent Processes for Structural Loads,” Journal of Structural Engineering, V. 107, 1981, pp. 857-872.10.1061/JSDEAG.0005709 ↗

51. Domingo-Cabo, A.; Lázaro, C.; López-Gayarre, F.; Serrano-López, M. A.; Serna, P.; and Castaño-Tabares, J. O., “Creep and Shrinkage of Recycled Aggregate Concrete,” Construction and Building Materials, V. 23, No. 7, 2009, pp. 2545-2553. doi: 10.1016/j.conbuildmat.2009.02.01810.1016/j.conbuildmat.2009.02.018 ↗

52. Fathifazl, G.; Ghani Razaqpur, A.; Burkan Isgor, O.; Abbas, A.; Fournier, B.; and Foo, S., “Creep and Drying Shrinkage Characteristics of Concrete Produced with Coarse Recycled Concrete Aggregate,” Cement and Concrete Composites, V. 33, No. 10, 2011, pp. 1026-1037. doi: 10.1016/j.cemconcomp.2011.08.00410.1016/j.cemconcomp.2011.08.004 ↗

53. Kou, S. C., and Poon, C. S., “Enhancing the Durability Properties of Concrete Prepared with Coarse Recycled Aggregate,” Construction and Building Materials, V. 35, 2012, pp. 69-76. doi: 10.1016/j.conbuildmat.2012.02.03210.1016/j.conbuildmat.2012.02.032 ↗

54. Silva, R. V.; De Brito, J.; and Dhir, R. K., “Prediction of the Shrinkage Behavior of Recycled Aggregate Concrete: A Review,” Construction and Building Materials, V. 77, 2015, pp. 327-339. doi: 10.1016/j.conbuildmat.2014.12.10210.1016/j.conbuildmat.2014.12.102 ↗

55. Lye, C. Q.; Dhir, R. K.; Ghataora, G. S.; and Li, H., “Creep Strain of Recycled Aggregate Concrete,” Construction and Building Materials, V. 102, 2016, pp. 244-259. doi: 10.1016/j.conbuildmat.2015.10.18110.1016/j.conbuildmat.2015.10.181 ↗

56. Agrela, F.; Alaejos, P.; and de Juan, M. S., “Properties of Concrete with Recycled Aggregates, in: Pacheco-Torgal et al. (Eds.), Handbook of Recycled Concrete and Demolition Waste, Woodhead, London, UK, 2013.10.1533/9780857096906.2.304 ↗

57. De Brito, J., and Saikia, N., Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste, Springer Science and Business Media, 2011.10.1007/978-1-4471-4540-0_3 ↗