Compression Behavior of Seawater and Sea-Sand Concrete Reinforced with Fiber and Glass Fiber-Reinforced Polymer Bars

1. Islam, M. M.; Islam, M. S.; Al-Amin, M.; and Islam, M. M., “Suitability of Sea Water on Curing and Compressive Strength of Structural Concrete,” Journal of Civil Engineering, V. 40, No. 1, 2012, pp. 37-45.

2. Wegian, F. M., “Effect of Seawater for Mixing and Curing on Structural Concrete,” Ies Journal Part A Civil & Structural Engineering, V. 3, No. 4, 2010, pp. 235-243. doi: 10.1080/19373260.2010.52104810.1080/19373260.2010.521048 ↗

3. Limeira, J.; Agullo, L.; and Etxeberria, M., “Dredged Marine Sand in Concrete: An Experimental Section of a Harbor Pavement,” Construction and Building Materials, V. 24, No. 6, 2010, pp. 863-870. doi: 10.1016/j.conbuildmat.2009.12.01110.1016/j.conbuildmat.2009.12.011 ↗

4. Limeira de Araujo, J.; Agulló Fité, L.; and Etxeberria Larrañaga, M., “Dredged Marine Sand as Constructive Material,” XIèmes Journées Nationales Génie Côtier – Génie Civil, Les Sables d'Olonne, France, 2010, pp. 877-886.10.5150/jngcgc.2010.095-L ↗

5. Issa, M. S.; Metwally, I. M.; and Elzeiny, S. M., “Influence of Fibers on Flexural Behavior and Ductility of Concrete Beams Reinforced with GFRP Rebars,” Engineering Structures, V. 33, No. 5, 2011, pp. 1754-1763. doi: 10.1016/j.engstruct.2011.02.01410.1016/j.engstruct.2011.02.014 ↗

6. Caggiano, A.; Cremona, M.; Faella, C.; Lima, C.; and Martinelli, E., “Fracture Behavior of Concrete Beams Reinforced with Mixed Long/Short Steel Fibers,” Construction and Building Materials, V. 37, No. 3, 2012, pp. 832-840. doi: 10.1016/j.conbuildmat.2012.07.06010.1016/j.conbuildmat.2012.07.060 ↗

7. Pereira, E. B.; Fischer, G.; and Barros, J., “Effect of Hybrid Fiber Reinforcement on the Cracking Process in Fiber Reinforced Cementitious Composites,” Cement and Concrete Composites, V. 34, No. 10, 2012, pp. 1114-1123. doi: 10.1016/j.cemconcomp.2012.08.00410.1016/j.cemconcomp.2012.08.004 ↗

8. Yang, J. M.; Min, K. H.; Shin, H. O.; and Yoon, Y. S., “Effect of Steel and Synthetic Fibers on Flexural Behavior of High-Strength Concrete Beams Reinforced with FRP Bars,” Composites. Part B, Engineering, V. 43, No. 3, 2012, pp. 1077-1086. doi: 10.1016/j.compositesb.2012.01.04410.1016/j.compositesb.2012.01.044 ↗

9. Wang, H., and Belarbi, A., “Ductility Characteristics of Fiber-Reinforced-Concrete Beams Reinforced with FRP Rebars,” Construction and Building Materials, V. 25, No. 5, 2011, pp. 2391-2401. doi: 10.1016/j.conbuildmat.2010.11.04010.1016/j.conbuildmat.2010.11.040 ↗

10. Ding, Y.; Ning, X.; Zhang, Y.; Pacheco-Torgal, F.; and Aguiar, J. B., “Fibres for Enhancing of the Bond Capacity between GFRP Rebar and Concrete,” Construction and Building Materials, V. 51, No. 2, 2014, pp. 303-312. doi: 10.1016/j.conbuildmat.2013.10.08910.1016/j.conbuildmat.2013.10.089 ↗

11. Beglarigale, A., and Yazıcı, H., “Pull-Out Behavior of Steel Fiber Embedded in Flowable RPC and Ordinary Mortar,” Construction and Building Materials, V. 75, 2015, pp. 255-265. doi: 10.1016/j.conbuildmat.2014.11.03710.1016/j.conbuildmat.2014.11.037 ↗

12. Buratti, N.; Ferracuti, B.; and Savoia, M., “Concrete Crack Reduction in Tunnel Linings by Steel Fibre-Reinforced Concretes,” Construction and Building Materials, V. 44, No. 7, 2013, pp. 249-259. doi: 10.1016/j.conbuildmat.2013.02.06310.1016/j.conbuildmat.2013.02.063 ↗

13. Söylev, T. A., and Özturan, T., “Durability, Physical and Mechanical Properties of Fiber-Reinforced Concretes at Low-Volume Fraction,” Construction and Building Materials, V. 73, 2014, pp. 67-75. doi: 10.1016/j.conbuildmat.2014.09.05810.1016/j.conbuildmat.2014.09.058 ↗

14. Tassew, S. T., and Lubell, A. S., “Mechanical Properties of Glass Fiber Reinforced Ceramic Concrete,” Construction and Building Materials, V. 51, No. 1, 2014, pp. 215-224. doi: 10.1016/j.conbuildmat.2013.10.04610.1016/j.conbuildmat.2013.10.046 ↗

15. Sayyar, M.; Soroushian, P.; Sadiq, M. M.; Balachandra, A.; and Lu, J., “Low-Cost Glass Fiber Composites with Enhanced Alkali Resistance Tailored Towards Concrete Reinforcement,” Construction and Building Materials, V. 44, No. 3, 2013, pp. 458-463. doi: 10.1016/j.conbuildmat.2013.03.05510.1016/j.conbuildmat.2013.03.055 ↗

16. Alberti, M. G.; Enfedaque, A.; and Gálvez, J. C., “On the Mechanical Properties and Fracture Behavior of Polyolefin Fiber-Reinforced Self-Compacting Concrete,” Construction and Building Materials, V. 55, No. 4, 2014, pp. 274-288. doi: 10.1016/j.conbuildmat.2014.01.02410.1016/j.conbuildmat.2014.01.024 ↗

17. Pereira-De-Oliveira, L. A.; Castro-Gomes, J. P.; and Nepomuceno, M. C. S., “Effect of Acrylic Fibres Geometry on Physical, Mechanical and Durability Properties of Cement Mortars,” Construction and Building Materials, V. 27, No. 1, 2012, pp. 189-196. doi: 10.1016/j.conbuildmat.2011.07.06110.1016/j.conbuildmat.2011.07.061 ↗

18. Vincent, T., and Ozbakkaloglu, T., “Influence of Fiber Orientation and Specimen End Condition on Axial Compressive Behavior of FRP-Confined Concrete,” Construction and Building Materials, V. 47, 2013, pp. 814-826. doi: 10.1016/j.conbuildmat.2013.05.08510.1016/j.conbuildmat.2013.05.085 ↗

19. Chaves, L. P., and Cunha, J., “Design of Carbon Fiber Reinforcement of Concrete Slabs Using Topology Optimization,” Construction and Building Materials, V. 73, 2014, pp. 688-698. doi: 10.1016/j.conbuildmat.2014.10.01110.1016/j.conbuildmat.2014.10.011 ↗

20. Cao, M.; Zhang, C.; and Lv, H., “Mechanical Response and Shrinkage Performance of Cementitious Composites with a New Fiber Hybridization,” Construction and Building Materials, V. 57, No. 5, 2014, pp. 45-52. doi: 10.1016/j.conbuildmat.2014.01.08810.1016/j.conbuildmat.2014.01.088 ↗

21. Pujadas, P.; Blanco, A.; Cavalaro, S.; de la Fuente, A.; and Aguado, A., “Fibre Distribution in Macro-Plastic Fibre Reinforced Concrete Slab-Panels,” Construction and Building Materials, V. 64, No. 30, 2014, pp. 496-503. doi: 10.1016/j.conbuildmat.2014.04.06710.1016/j.conbuildmat.2014.04.067 ↗

22. JGJ/T 221-2010, “Technical Specification for Application of Fiber Reinforced Concrete,” China Architecture & Building Press, Beijing, China, 2010, 62 pp. (in Chinese)

23. CECS 13:2009, “Standard Test Methods for Fiber Reinforced Concrete,” China Association for Engineering Construction Standardization, Beijing, China, 2009, 116 pp. (in Chinese)

24. Dhinakaran, G.; Manoharan, K.; and Jeyasehar, C. A., “Load Deformation Characteristics of GFRP Reinforced HPC Square Columns,” Journal of Civil Engineering Research & Practice, V. 7, No. 2, 2011. doi: 10.4314/jcerp.v7i2.6372610.4314/jcerp.v7i2.63726 ↗

25. Tobbi, H.; Farghaly, A. S.; and Benmokrane, B., “Concrete Columns Reinforced Longitudinally and Transversally with Glass Fiber-Reinforced Polymer Bars,” ACI Structural Journal, V. 109, No. 4, July-Aug. 2012, pp. 551-558.10.14359/51683874 ↗

26. Luca, A. D.; Matta, F.; and Nanni, A., “Behavior of Full-Scale Glass Fiber-Reinforced Polymer Reinforced Concrete Columns under Axial Load,” ACI Structural Journal, V. 107, No. 5, Sept.-Oct. 2010, pp. 589-596.10.14359/51663912 ↗

27. Sharma, U. K.; Bhargava, P.; and Kaushik, S., “Behavior of Confined High Strength Concrete Columns under Axial Compression,” Journal of Advanced Concrete Technology, V. 3, No. 2, 2005, pp. 267-281. doi: 10.3151/jact.3.26710.3151/jact.3.267 ↗

28. Hasan, H. A.; Sheikh, M. N.; and Hadi, M. N. S., “Maximum Axial Load Carrying Capacity of Fibre Reinforced-Polymer (FRP) Bar Reinforced Concrete Columns under Axial Compression,” Structures, V. 19, 2019, pp. 227-233. doi: 10.1016/j.istruc.2018.12.01210.1016/j.istruc.2018.12.012 ↗

29. Naderpour, H.; Nagai, K.; Fakharian, P.; and Haji, M., “Innovative Models for Prediction of Compressive Strength of FRP-Confined Circular Reinforced Concrete Columns Using Soft Computing Methods,” Composite Structures, V. 215, 2019, pp. 69-84. doi: 10.1016/j.compstruct.2019.02.04810.1016/j.compstruct.2019.02.048 ↗

30. ACI Committee 440, “Guide for the Design and Construction of Structural Concrete Reinforced with Fiber-Reinforced Polymer Bars (ACI 440.1R-15),” American Concrete Institute, Farmington Hills, MI, 2015, 88 pp.

31. GB 50608-2010, “Technical Code for Infrastructure Application of FRP Composites,” China Metallurgical Construction Association, Beijing, China, 2010, 183 pp. (in Chinese)

32. CAN/CSA S806-12, “Design and Construction of Building Structures with Fibre-Reinforced Polymers,” Canadian Standards Association, Mississauga, ON, Canada, 2012, 177 pp.

33. Sun, L.; Wei, M.; and Zhang, N., “Experimental Study on the Behavior of GFRP Reinforced Concrete Columns under Eccentric Axial Load,” Construction and Building Materials, V. 152, 2017, pp. 214-225. doi: 10.1016/j.conbuildmat.2017.06.15910.1016/j.conbuildmat.2017.06.159 ↗

34. Salah-Eldin, A.; Mohamed, H. M.; and Benmokrane, B., “Structural Performance of High-Strength-Concrete Columns Reinforced with GFRP Bars and Ties Subjected to Eccentric Loads,” Engineering Structures, V. 185, 2019, pp. 286-300. doi: 10.1016/j.engstruct.2019.01.14310.1016/j.engstruct.2019.01.143 ↗

35. Choo, C. C.; Harik, I. E.; and Gesund, H., “Strength of Rectangular Concrete Columns Reinforced with Fiber-Reinforced Polymer Bars,” ACI Structural Journal, V. 103, No. 3, May-June 2006, pp. 452-459.10.14359/15324 ↗

36. Choo, C. C.; Harik, I. E.; and Gesund, H., “Minimum Reinforcement Ratio for Fiber-Reinforced Polymer Reinforced Concrete Rectangular Columns,” ACI Structural Journal, V. 103, No. 3, May-June 2006, pp. 460-466.10.14359/15325 ↗

37. Khorramian, K., and Sadeghian, P., “Experimental and Analytical Behavior of Short Concrete Columns Reinforced with GFRP Bars under Eccentric Loading,” Engineering Structures, V. 151, 2017, pp. 761-773. doi: 10.1016/j.engstruct.2017.08.06410.1016/j.engstruct.2017.08.064 ↗

38. ASTM D1141-98(2013), “Standard Practice for the Preparation of Substitute Ocean Water,” ASTM International, West Conshohocken, PA, 2013, 3 pp.

39. GB/T 50081-2002, “Standard for Test Method of Mechanical Properties on Ordinary Concrete,” China Architecture & Building Press, Beijing, China, 2003, 33 pp. (in Chinese)

40. GB 50010-2010, “Code for Design of Concrete Structures,” China Architecture & Building Press, Beijing, China, 2011, 425 pp. (in Chinese)

41. Tobbi, H.; Farghaly, A. S.; and Benmokrane, B., “Behavior of Concentrically Loaded Fiber-Reinforced Polymer Reinforced Concrete Columns with Varying Reinforcement Types and Ratios,” ACI Structural Journal, V. 111, No. 2, Mar.-Apr. 2014, pp. 375-385.10.14359/51686528 ↗

42. Kobayashi, K., and Fujisaki, T., “Compressive Behavior of FRP Reinforcement in Non-Prestressed Concrete Members,” NonMetallic (FRP) Reinforcement for Concrete Structures: Proceedings of the Second International RILEM Conference, CRC Press, Boca Raton, FL, 1995, pp. 267-274.