High‐energy storage performance in BaTiO3‐based lead‐free multilayer ceramic capacitors
Source abstract
Abstract
Lead-free BaTiO3 (BT)-based multilayer ceramic capacitors (MLCCs) with the thickness of dielectric layers ~9 μm were successfully fabricated by tape-casting and screen-printing techniques. A single phase of the pseudo-cubic structure was revealed by X-ray diffraction. Backscattered images and energy-dispersive X-ray elemental mapping indicated the high quality of MLCCs without observation of interaction, wrapping, or delamination. The relaxor state was confirmed by transmission electron microscopy and temperature-dependent permittivity. Impedance spectroscopy at various temperatures revealed the electrical heterogeneous response for MLCCs with high-resistive electrical components. Improved energy storage performance was obtained by multilayering, comparing with the bulk ceramics. Enhanced recoverable energy density ~6.88 J/cm3 with high efficiency ~90% were realized under an electric field of 820 kV/cm, which is mainly attributed to the intrinsic high-resistivity and relaxor behavior. Furthermore, good temperature (20–85 °C) and frequency stabilities (0.5–50 Hz) were observed in the MLCCs, which are attractive for pulsed power applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. K. Capacitors: Multilayer ceramic capacitors in automotive. Power Electron. Eur. 2, 36 (2017).
2. M. Manufacturing: Chip Multilayer Ceramic Capacitors for Automotive Murata innovator Electronics, https://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/mlcc/c03e.ashx (2020).
3. K. Hong, T.H. Lee, J.M. Suh, S-H. Yoon, and H.W. Jang: Perspectives and challenges in multilayer ceramic capacitors for next generation electronics. J. Mater. Chem. C 7, 9782 (2019).10.1039/C9TC02921D ↗
4. L. Yang, X. Kong, F. Li, H. Hao, Z. Cheng, H. Liu, J-F. Li, and S. Zhang: Perovskite lead-free dielectrics for energy storage applications. Prog. Mater. Sci. 102, 72 (2019).10.1016/j.pmatsci.2018.12.005 ↗
5. D. Wang, G. Wang, S. Murakami, Z. Fan, A. Feteira, D. Zhou, S. Sun, Q. Zhao, and I.M. Reaney: BiFeO3-BaTiO3: A new generation of lead-free electroceramics. J. Adv. Dielectr. 08, 1830004 (2018).10.1142/S2010135X18300049 ↗
6. H. Palneedi, M. Peddigari, G-T. Hwang, D-Y. Jeong, and J. Ryu: High-performance dielectric ceramic films for energy storage capacitors: Progress and outlook. Adv. Funct. Mater. 28, 1803665 (2018).10.1002/adfm.201803665 ↗
7. Z. Liu, T. Lu, J. Ye, G. Wang, X. Dong, R. Withers, and Y. Liu: Antiferroelectrics for energy storage applications: A review. Adv. Mater. Technol. 3, 1800111 (2018).10.1002/admt.201800111 ↗
8. Z. Yao, Z. Song, H. Hao, Z. Yu, M. Cao, S. Zhang, M.T. Lanagan, and H. Liu: Homogeneous/inhomogeneous-structured dielectrics and their energy-storage performances. Adv. Mater. 29, 1601727 (2017).10.1002/adma.201601727 ↗
9. X. Hao: A review on the dielectric materials for high energy-storage application. J. Adv. Dielectr. 03, 1330001 (2013).10.1142/S2010135X13300016 ↗
10. H. Chen, T.N. Cong, W. Yang, C. Tan, Y. Li, and Y. Ding: Progress in electrical energy storage system: A critical review. Prog. Nat. Sci. Mater. 19, 291 (2009).10.1016/j.pnsc.2008.07.014 ↗
11. H. Kishi, Y. Mizuno, and H. Chazono: Base-metal electrode-multilayer ceramic capacitors: Past, present and future perspectives. Jpn. J. Appl. Phys. 42, 1 (2003).10.1143/JJAP.42.1 ↗
12. Z. Sun, Z. Wang, Y. Tian, G. Wang, W. Wang, M. Yang, X. Wang, F. Zhang, and Y. Pu: Progress, outlook, and challenges in lead-free energy-storage ferroelectrics. Adv. Electron. Mater. 6, 1900698 (2020).10.1002/aelm.201900698 ↗
13. G.A. Snook, P. Kao, and A.S. Best: Conducting-polymer-based supercapacitor devices and electrodes. J. Power Sources 196, 1 (2011).10.1016/j.jpowsour.2010.06.084 ↗
14. S. Wang, S. Jiao, J. Wang, H-S. Chen, D. Tian, H. Lei, and D-N. Fang: High-performance aluminum-ion battery with CuS@C microsphere composite cathode. ACS Nano 11, 469 (2017).10.1021/acsnano.6b06446 ↗
15. Y. Song, S. Jiao, J. Tu, J. Wang, Y. Liu, H. Jiao, X. Mao, Z. Guo, and D.J. Fray: A long-life rechargeable Al ion battery based on molten salts. J. Mater. Chem. A 5, 1282 (2017).10.1039/C6TA09829K ↗
16. H. Sun, W. Wang, Z. Yu, Y. Yuan, S. Wang, and S. Jiao: A new aluminium-ion battery with high voltage, high safety and low cost. Chem. Commun. 51, 11892 (2015).10.1039/C5CC00542F ↗
17. W. Wang, B. Jiang, W. Xiong, H. Sun, Z. Lin, L. Hu, J. Tu, J. Hou, H. Zhu, and S. Jiao: A new cathode material for super-valent battery based on aluminium ion intercalation and deintercalation. Sci. Rep. 3, 3383 (2013).10.1038/srep03383 ↗
18. S. Wang, Z. Yu, J. Tu, J. Wang, D. Tian, Y. Liu, and S. Jiao: A novel aluminum-ion battery: Al/AlCl3-[EMIm]Cl/Ni3S2@graphene. Adv. Energy Mater. 6, 1600137 (2016).10.1002/aenm.201600137 ↗
19. H. Jiao, C. Wang, J. Tu, D. Tian, and S. Jiao: A rechargeable Al-ion battery: Al/molten AlCl3–urea/graphite. Chem. Commun. 53, 2331 (2017).10.1039/C6CC09825H ↗
20. Q. Chen, Y. Shen, S. Zhang, and Q.M. Zhang: Polymer-based dielectrics with high energy storage density. Annu. Rev. Mater. Res. 45, 433 (2015).10.1146/annurev-matsci-070214-021017 ↗
21. Q. Li, F-Z. Yao, Y. Liu, G. Zhang, H. Wang, and Q. Wang: High-temperature dielectric materials for electrical energy storage. Annu. Rev. Mater. Res. 48, 219 (2018).10.1146/annurev-matsci-070317-124435 ↗
22. S.I. Shkuratov, J. Baird, V.G. Antipov, S. Zhang, and J.B. Chase: Multilayer PZT 95/5 antiferroelectric film energy storage devices with giant power density. Adv. Mater. 31, 1904819 (2019).10.1002/adma.201904819 ↗
23. W-B. Li, D. Zhou, R. Xu, D-W. Wang, J-Z. Su, L-X. Pang, W-F. Liu, and G-H. Chen: BaTiO3-based multilayers with outstanding energy storage performance for high temperature capacitor applications. ACS Appl. Energy Mater. 2, 5499 (2019).10.1021/acsaem.9b00664 ↗
24. W-B. Li, D. Zhou, R. Xu, L-X. Pang, and I.M. Reaney: BaTiO3–Bi(Li0.5Ta0.5)O3, lead-free ceramics, and multilayers with high energy storage density and efficiency. ACS Appl. Energy Mater. 1, 5016 (2018).10.1021/acsaem.8b01001 ↗
25. M. Zhou, R. Liang, Z. Zhou, and X. Dong: Novel BaTiO3-based lead-free ceramic capacitors featuring high energy storage density, high power density, and excellent stability. J. Mater. Chem. C 6, 8528 (2018).10.1039/C8TC03003K ↗
26. Q. Yuan, F. Yao, Y. Wang, R. Ma, and H. Wang: Relaxor ferroelectric 0.9BaTiO3–0.1Bi(Zn0.5Zr0.5)O3 ceramic capacitors with high energy density and temperature stable energy storage properties. J. Mater. Chem. C 5, 9552 (2017).10.1039/C7TC02478A ↗
27. M. Li, P. Fan, W. Ma, K. Liu, J. Zang, C. Samart, T. Zhang, H. Tan, D. Salamon, and H. Zhang: Constructing layered structures to enhance the breakdown strength and energy density of Na0.5Bi0.5TiO3-based lead-free dielectric ceramics. J. Mater. Chem. C 7, 15292 (2019).10.1039/C9TC05637H ↗
28. Z. Pan, D. Hu, Y. Zhang, J. Liu, B. Shen, and J. Zhai: Achieving high discharge energy density and efficiency with NBT-based ceramics for application in capacitors. J. Mater. Chem. C 7, 4072 (2019).10.1039/C9TC00087A ↗
29. L. Zhang, Y. Pu, M. Chen, T. Wei, W. Keipper, R. Shi, X. Guo, R. Li, and X. Peng: High energy-storage density under low electric fields and improved optical transparency in novel sodium bismuth titanate-based lead-free ceramics. J. Eur. Ceram. Soc. 40, 71 (2020).10.1016/j.jeurceramsoc.2019.09.001 ↗
30. L. Zhang, Y. Pu, M. Chen, T. Wei, and X. Peng: Novel Na0.5Bi0.5TiO3 based, lead-free energy storage ceramics with high power and energy density and excellent high-temperature stability. Chem. Eng. J. 383, 123154 (2020).10.1016/j.cej.2019.123154 ↗
31. D. Wang, Z. Fan, W. Li, D. Zhou, A. Feteira, G. Wang, S. Murakami, S. Sun, Q. Zhao, X. Tan, and I.M. Reaney: High energy storage density and large strain in Bi(Zn2/3Nb1/3)O3-doped BiFeO3–BaTiO3 ceramics. ACS Appl. Energy Mater. 1, 4403 (2018).10.1021/acsaem.8b01099 ↗
32. D. Wang, Z. Fan, D. Zhou, A. Khesro, S. Murakami, A. Feteira, Q. Zhao, X. Tan, and I.M. Reaney: Bismuth ferrite-based lead-free ceramics and multilayers with high recoverable energy density. J. Mater. Chem. A 6, 4133 (2018).10.1039/C7TA09857J ↗
33. G. Wang, J. Li, X. Zhang, Z. Fan, F. Yang, A. Feteira, D. Zhou, D.C. Sinclair, T. Ma, X. Tan, D. Wang, and I.M. Reaney: Ultrahigh energy storage density lead-free multilayers by controlled electrical homogeneity. Energy Environ. Sci. 12, 582 (2019).10.1039/C8EE03287D ↗
34. G. Wang, Z. Lu, J. Li, H. Ji, H. Yang, L. Li, S. Sun, A. Feteira, H. Yang, R. Zuo, D. Wang, and I.M. Reaney: Lead-free (Ba,Sr)TiO3–BiFeO3 based multilayer ceramic capacitors with high energy density. J. Eur. Ceram. Soc. 40, 1779 (2020).10.1016/j.jeurceramsoc.2019.12.009 ↗
35. G. Wang, Z. Lu, H. Yang, H. Ji, A. Mostaed, L. Li, Y. Wei, A. Feteira, S. Sun, D.C. Sinclair, D. Wang, and I.M. Reaney: Fatigue resistant lead-free multilayer ceramic capacitors with ultrahigh energy density. J. Mater. Chem. A 8, 11414 (2020).10.1039/D0TA00216J ↗
36. Y. Tian, L. Jin, H. Zhang, Z. Xu, X. Wei, E.D. Politova, S.Y. Stefanovich, N.V. Tarakina, I. Abrahams, and H. Yan: High energy density in silver niobate ceramics. J. Mater. Chem. A 4, 17279 (2016).10.1039/C6TA06353E ↗
37. Y. Tian, L. Jin, H. Zhang, Z. Xu, X. Wei, G. Viola, I. Abrahams, and H. Yan: Phase transitions in bismuth-modified silver niobate ceramics for high power energy storage. J. Mater. Chem. A 5, 17525 (2017).10.1039/C7TA03821F ↗
38. L. Zhao, Q. Liu, J. Gao, S. Zhang, and J-F. Li: Lead-free antiferroelectric silver niobate tantalate with high energy storage performance. Adv. Mater. 29, 1701824 (2017).10.1002/adma.201701824 ↗
39. J. Gao, Y. Zhang, L. Zhao, K-Y. Lee, Q. Liu, A. Studer, M. Hinterstein, S. Zhang, and J. Li: Enhanced antiferroelectric phase stability in La-doped AgNbO3: Perspectives from the microstructure to energy storage properties. J. Mater. Chem. A 7, 2225 (2018).10.1039/C8TA09353A ↗
40. K. Han, N. Luo, S. Mao, F. Zhuo, L. Liu, B. Peng, X. Chen, C. Hu, H. Zhou, and Y. Wei: Ultrahigh energy-storage density in A-/B-site co-doped AgNbO3 lead-free antiferroelectric ceramics: insight into the origin of antiferroelectricity. J. Mater. Chem. A 7, 26293 (2019).10.1039/C9TA06457E ↗
41. N. Luo, K. Han, F. Zhuo, C. Xu, G. Zhang, L. Liu, X. Chen, C. Hu, H. Zhou, and Y. Wei: Aliovalent A-site engineered AgNbO3 lead-free antiferroelectric ceramics toward superior energy storage density. J. Mater. Chem. A 7, 14118 (2019).10.1039/C9TA02053E ↗
42. Y. Tian, L. Jin, Q. Hu, K. Yu, Y. Zhuang, G. Viola, I. Abrahams, Z. Xu, X. Wei, and H. Yan: Phase transitions in tantalum-modified silver niobate ceramics for high power energy storage. J. Mater. Chem. A 7, 834 (2019).10.1039/C8TA10075F ↗
43. Z. Lu, W. Bao, G. Wang, S. Sun, L. Li, J. Li, H. Yang, H. Ji, A. Feteira, D-j. Li, F. Xu, A. Kleppe, D. Wang, S-Y. Liu, and I.M. Reaney: Superior energy storage in AgNbO3-based lead-free antiferroelectrics. Nano Energy, https://doi.org/10.1016/j.nanoen.2020.105423 (2020).10.1016/j.nanoen.2020.105423 ↗
44. Z. Yang, H. Du, S. Qu, Y. Hou, H. Ma, J. Wang, J. Wang, X. Wei, and Z. Xu: Significantly enhanced recoverable energy storage density in potassium–sodium niobate-based lead free ceramics. J. Mater. Chem. A 4, 13778 (2016).10.1039/C6TA04107H ↗
45. T. Shao, H. Du, H. Ma, S. Qu, J. Wang, J. Wang, X. Wei, and Z. Xu: Potassium–sodium niobate based lead-free ceramics: Novel electrical energy storage materials. J. Mater. Chem. A 5, 554 (2017).10.1039/C6TA07803F ↗
46. H. Tao and J. Wu: Optimization of energy storage density in relaxor (K, Na, Bi)NbO3 ceramics. J. Mater. Sci. Mater. Electron. 28, 16199 (2017).10.1007/s10854-017-7521-2 ↗
47. J. Li, F. Li, Z. Xu, and S. Zhang: Multilayer lead-free ceramic capacitors with ultrahigh energy density and efficiency. Adv. Mater. 30, 1802155 (2018).10.1002/adma.201802155 ↗
48. C. Cui and Y. Pu: Improvement of energy storage density with trace amounts of ZrO2 additives fabricated by wet-chemical method. J. Alloys Compd. 747, 495 (2018).10.1016/j.jallcom.2018.03.058 ↗
49. X. Qiao, F. Zhang, D. Wu, B. Chen, X. Zhao, Z. Peng, X. Ren, P. Liang, X. Chao, and Z. Yang: Superior comprehensive energy storage properties in Bi0.5Na0.5TiO3-based relaxor ferroelectric ceramics. Chem. Eng. J. 388, 124158 (2020).10.1016/j.cej.2020.124158 ↗
50. K. Han, N. Luo, Y. Jing, X. Wang, B. Peng, L. Liu, C. Hu, H. Zhou, Y. Wei, X. Chen, and Q. Feng: Structure and energy storage performance of Ba-modified AgNbO3 lead-free antiferroelectric ceramics. Ceram. Int. 45, 5559 (2019).10.1016/j.ceramint.2018.12.014 ↗
51. P. Zhao, H. Wang, L. Wu, L. Chen, Z. Cai, L. Li, and X. Wang: High-performance relaxor ferroelectric materials for energy storage applications. Adv. Energy Mater. 9, 1803048 (2019).10.1002/aenm.201803048 ↗
52. Z. Cai, C. Zhu, H. Wang, P. Zhao, L. Chen, L. Li, and X. Wang: High-temperature lead-free multilayer ceramic capacitors with ultrahigh energy density and efficiency fabricated via two-step sintering. J. Mater. Chem. A 7, 14575 (2019).10.1039/C9TA04317A ↗
53. Z. Sun, L. Wang, M. Liu, C. Ma, Z. Liang, Q. Fan, L. Lu, X. Lou, H. Wang, and C-L. Jia: Interface thickness optimization of lead-free oxide multilayer capacitors for high-performance energy storage. J. Mater. Chem. A 6, 1858 (2018).10.1039/C7TA10271B ↗
54. H. Yang, G. Wang, Z. Lu, L. Li, W. Bao, H. Ji, J. Li, A. Feteira, F. Xu, Y. Zhang, H. Sun, Z. Huang, W. Lou, K. Song, S. Sun, D. Wang, and I.M Reaney: Novel BaTiO3-based, Ag/Pd compatible lead-free relaxors with superior energy storage performance. ACS Appl. Mater. Interfaces. (2020). doi: 10.1021/acsami.0c13057.10.1021/acsami.0c13057 ↗
55. D. Zheng, R. Zuo, D. Zhang, and Y. Li: Novel BiFeO3–BaTiO3–Ba(Mg1/3Nb2/3)O3 lead-free relaxor ferroelectric ceramics for energy-storage capacitors. J. Am. Ceram. Soc. 98, 2692 (2015).10.1111/jace.13737 ↗
56. F. Hussain, A. Khesro, Z. Lu, G. Wang, and D. Wang: Lead free multilayer piezoelectric actuators by economically new approach. Front. Mater. 7, 87 (2020).10.3389/fmats.2020.00087 ↗
57. D.J. Cumming, T. Sebastian, I. Sterianou, J. Rödel, and I.M. Reaney: Bi(Me)O3–PbTiO3 high TC piezoelectric multilayers. Mater. Technol. 28, 247 (2013).10.1179/1753555713Y.0000000067 ↗
58. T. Wang, L. Jin, C. Li, Q. Hu, and X. Wei: Relaxor ferroelectric BaTiO3–Bi(Mg2/3Nb1/3)O3 ceramics for energy storage application. J. Am. Ceram. Soc. 98, 559 (2015).10.1111/jace.13325 ↗
59. L. Li, M. Li, H. Zhang, I.M. Reaney, and D.C. Sinclair: Controlling mixed conductivity in Na1/2Bi1/2TiO3 using A-site non-stoichiometry and Nb-donor doping. J. Mater. Chem. C 4, 5779 (2016).10.1039/C6TC01719C ↗
60. M. Li, L. Li, J. Zang, and D.C. Sinclair: Donor-doping and reduced leakage current in Nb-doped Na0.5Bi0.5TiO3. Appl. Phys. Lett. 106, 102904 (2015).10.1063/1.4914509 ↗
61. M. Li, H. Zhang, S.N. Cook, L. Li, J.A. Kilner, I.M. Reaney, and D.C. Sinclair: Dramatic influence of A-site nonstoichiometry on the electrical conductivity and conduction mechanisms in the perovskite oxide Na0.5Bi0.5TiO3. Chem. Mater. 27, 629 (2015).10.1021/cm504475k ↗
62. Z. Lu, G. Wang, W. Bao, J. Li, L. Li, A. Mostaed, H. Yang, H. Ji, D. Li, A. Feteira, F. Xu, D. Sinclair, D. Wang, S-Y. Liu, and I. Reaney: Superior energy density through tailored dopant strategies in multilayer ceramic capacitors. Energy Environ. Sci. 13, 2938 (2020).10.1039/D0EE02104K ↗
63. L. Chen, H. Wang, P. Zhao, C. Zhu, Z. Cai, Z. Cen, L. Li, and X. Wang: Multifunctional BaTiO3-(Bi0.5Na0.5)TiO3-based MLCC with high-energy storage properties and temperature stability. J. Am. Ceram. Soc. 102, 4178 (2019).10.1111/jace.16292 ↗
64. L. Chen, N. Sun, Y. Li, Q. Zhang, L. Zhang, and X. Hao: Multifunctional antiferroelectric MLCC with high-energy-storage properties and large field-induced strain. J. Am. Ceram. Soc. 101, 2313 (2018).10.1111/jace.15380 ↗
65. H. Ogihara, C.A. Randall, and S. Trolier-McKinstry: High-energy density capacitors utilizing 0.7BaTiO3–0.3BiScO3 ceramics. J. Am. Ceram. Soc. 92, 1719 (2009).10.1111/j.1551-2916.2009.03104.x ↗
66. Z. Cai, H. Wang, P. Zhao, L. Chen, C. Zhu, K. Hui, L. Li, and X. Wang: Significantly enhanced dielectric breakdown strength and energy density of multilayer ceramic capacitors with high efficiency by electrodes structure design. Appl. Phys. Lett. 115, 023901 (2019).10.1063/1.5110527 ↗