The effect of abrasive hardness on the chemical-assisted polishing of (0001) plane sapphire

A series of abrasives with various hardness values including monocrystalline and polycrystalline diamond, α- and γ-alumina, zirconia, ceria, and silica were used to examine the concept of chemical-assisted polishing for finishing the (0001), c-plane (basal plane), of sapphire. Diaspore, a monohydrate of alumina, was also evaluated. Atomic force microscopy suggested that the hydrated layer of the c-plane surface was about 1 nm thick. Polishing experiments were designed to determine whether the chemically modified surface hydration layer forms on the basal plane in water. The results indicate that harder abrasives do not necessarily cause faster material removal and better surface finish for similar abrasive particle size. Abrasives with hardness equal to or less than sapphire such as α-Al₂O₃ and γ-Al₂O₃ achieved the best surface finish and greatest efficiency of material removal. It is proposed that the (0001) c-plane sapphire surface was modified by water to form a thin hydration layer with structure and hardness close to diaspore. This reaction layer can be removed by an abrasive that is softer than sapphire but harder than the reaction layer. α-Al₂O₃ was particularly effective. This result is attributed to adhesion between identical reaction layers on the basal planes of the alumina abrasive and the sapphire. This demonstrates that high removal rates and good surface finish can be achieved without costly diamond polishing.