Effects of Pre-Damage on Stress-Strain Relationship of Partially Confined Concrete

1. Wu, Y. F.; Yun, Y.; Wei, Y. Y.; and Zhou, Y. W., “Effect of Predamage on the Stress-Strain Relationship of Confined Concrete under Monotonic Loading,” Journal of Structural Engineering, ASCE, V. 140, No. 12, 2014, p. 04014093 doi: 10.1061/(ASCE)ST.1943-541X.000101510.1061/(ASCE)ST.1943-541X.0001015 ↗

2. Li, P.; Sui, L.; Xing, F.; Li, M.; Zhou, Y. W.; and Wu, Y. F., “Stress–Strain Relation Of Frp-Confined Predamaged Concrete Prisms With Square Sections of Different Corner Radii Subjected To Monotonic Axial Compression,” Journal of Composites for Construction, ASCE, V. 23, No. 2, 2019, p. 04019001 doi: 10.1061/(ASCE)CC.1943-5614.000092110.1061/(ASCE)CC.1943-5614.0000921 ↗

3. Tsonos, A. G., “Effectiveness of Cfrp-Jackets and Rc-Jackets in Post-Earthquake and Pre-Earthquake Retrofitting of Beam–Column Subassemblages,” Engineering Structures, V. 30, No. 3, 2008, pp. 777-793. doi: 10.1016/j.engstruct.2007.05.00810.1016/j.engstruct.2007.05.008 ↗

4. Ghernouti, Y.; Li, A.; and Rabehi, B., “Effectiveness of Repair On Damaged Concrete Columns By Using Fiber-Reinforced Polymer Composite and Increasing Concrete Section,” Journal of Reinforced Plastics and Composites, V. 31, No. 23, 2012, pp. 1616-1629. doi: 10.1177/073168441245855210.1177/0731684412458552 ↗

5. Iacobucci, R. D.; Sheikh, S. A.; and Bayrak, O., “Retrofit of Square Concrete Columns With Carbon Fiber-Reinforced Polymer for Seismic Resistance,” ACI Structural Journal, V. 100, No. 6, Nov.-Dec.2003, pp. 785-794.10.14359/12845 ↗

6. Li, G.; Hedlund, S.; Pang, S. S.; Alaywan, W.; Eggers, J.; and Abadie, C., “Repair of Damaged RC Columns using Fast Curing FRP Composites,” Composites. Part B, Engineering, V. 34, No. 3, 2003, pp. 261-271. doi: 10.1016/S1359-8368(02)00101-410.1016/S1359-8368(02)00101-4 ↗

7. Guo, Y. C.; Xiao, S. H.; Luo, J. W.; Ye, Y. Y.; and Zeng, J. J., “Confined Concrete in Fiber-Reinforced Polymer Partially Wrapped Square Columns: Axial Compressive Behavior and Strain Distributions by a Particle Image Velocimetry Sensing Technique,” Sensors (Switzerland), V. 18, No. 12, 2018, pp. 1-27. doi: 10.3390/s1812411810.3390/s18124118 ↗

8. Ghanem, S. Y., and Harik, I. E., “Concentrically Loaded Circular RC Columns Partially Confined With FRP,” International Journal of Concrete Structures and Materials, V. 12, No. 1, 2018, p. 12 doi: 10.1186/s40069-018-0283-210.1186/s40069-018-0283-2 ↗

9. Zeng, J. J.; Guo, Y. C.; Gao, W. Y.; Li, J. Z.; and Xie, J. H., “Behavior of Partially And Fully FRP-Confined Circularized Square Columns under Axial Compression,” Construction and Building Materials, V. 152, 2017, pp. 319-332. doi: 10.1016/j.conbuildmat.2017.06.15210.1016/j.conbuildmat.2017.06.152 ↗

10. Wang, W.; Sheikh, M. N.; Al-Baali, A. Q.; and Hadi, M. N. S., “Compressive Behaviour of Partially FRP Confined Concrete: Experimental Observations and Assessment of the Stress-Strain Models,” Construction and Building Materials, V. 192, 2018, pp. 785-797. doi: 10.1016/j.conbuildmat.2018.10.10510.1016/j.conbuildmat.2018.10.105 ↗

11. Al-Abadi, H.; Paton-Cole, V.; Patel, V. I.; and Thai, H. T., “Axial Strength and Elastic Stiffness Behaviour of Partially Confined Concrete Columns,” Construction and Building Materials, V. 196, 2019, pp. 727-741. doi: 10.1016/j.conbuildmat.2018.11.10410.1016/j.conbuildmat.2018.11.104 ↗

12. Ismail, R.; Rashid, R. S. M.; Chan, W. C.; Jaafar, M. S.; and Hejazi, F., “Compressive Behavior of Concrete Cylinder Fully and Partially Confined by Carbon Fibre-Reinforced Polymer (CFRP),” Construction and Building Materials, V. 201, 2019, pp. 196-206. doi: 10.1016/j.conbuildmat.2018.12.09510.1016/j.conbuildmat.2018.12.095 ↗

13. ASTM D3039-17, “Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials,” ASTM International, West Conshohocken, PA, 2017.

14. Jiang, C.; Wu, Y. F.; and Jiang, J. F., “Effect of Aggregate Size on Stress-Strain Behavior of Concrete Confined by Fiber Composites,” Composite Structures, V. 168, 2017, pp. 851-862. doi: 10.1016/j.compstruct.2017.02.08710.1016/j.compstruct.2017.02.087 ↗

15. Zhou, Y. W., and Wu, Y. F., “General Model for Constitutive Relationships of Concrete and Its Composite Structures,” Composite Structures, V. 94, No. 2, 2012, pp. 580-592. doi: 10.1016/j.compstruct.2011.08.02210.1016/j.compstruct.2011.08.022 ↗

16. Peter, D., Introductory Statistics with R., Springer-Verlag New York Inc., 2008.

17. Béton, F. Externally Bonded FRP Reinforcement for RC Structures: Technical Report on the Design and use of Externally Bonded Fibre Reinforced Polymer Reinforcement (FRP EBR) for Reinforced Concrete Structures, 2001.

18. Candappa, D. C.; Sanjayan, J. G.; and Setunge, S., “Complete Triaxial Stress-Strain Curves of High-Strength Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 13, No. 3, 2001, pp. 209-215. doi: 10.1061/(ASCE)0899-1561(2001)13:3(209)10.1061/(ASCE)0899-1561(2001)13:3(209) ↗

19. Li, Y. F., and Sung, Y. Y., “A Study on The Shear-Failure of Circular Sectioned Bridge Column Retrofitted by Using CFRP Jacketing,” Journal of Reinforced Plastics and Composites, V. 23, No. 8, 2004, pp. 811-830. doi: 10.1177/073168440403286510.1177/0731684404032865 ↗

20. Jiang, J. F., and Wu, Y. F., “Characterization of Yield Surfaces For FRP-Confined Concrete,” Journal of Engineering Mechanics, ASCE, V. 140, No. 12, 2014, pp. 1-13. doi: 10.1061/(ASCE)EM.1943-7889.000081110.1061/(ASCE)EM.1943-7889.0000811 ↗

21. Ozbakkaloglu, T.; Gholampour, A.; and Lim, J. C., “Damage-Plasticity Model For FRP-Confined Normal-Strength and High-Strength Concrete,” Journal of Composites for Construction, ASCE, V. 20, No. 6, 2016, p. 04016053 doi: 10.1061/(ASCE)CC.1943-5614.000071210.1061/(ASCE)CC.1943-5614.0000712 ↗

22. Mohammadi, M., and Wu, Y. F., “Modified Plastic-Damage Model for Passively Confined Concrete Based on Triaxial Tests,” Composites. Part B, Engineering, V. 159, 2019, pp. 211-223. doi: 10.1016/j.compositesb.2018.09.07410.1016/j.compositesb.2018.09.074 ↗

23. Yu, T.; Teng, J. G.; Wong, Y. L.; and Dong, S. L., “Finite Element Modeling of Confined Concrete-Ii: Plastic-Damage Model,” Engineering Structures, V. 32, No. 3, 2010, pp. 680-691. doi: 10.1016/j.engstruct.2009.11.01310.1016/j.engstruct.2009.11.013 ↗

24. Richart, F. E.; Brandtzaeg, A.; and Brown, R. L., The Failure of Plain and Spirally Reinforced Concrete in Compression. Bull. 190, Univ. Illinois, Eng. Exp. Station. Champaign, (1929).

25. Jiang, J. F., and Wu, Y. F., “Identification of Material Parameters for Drucker–Prager Plasticity Model for FRP Confined Circular Concrete Columns,” International Journal of Solids and Structures, V. 49, No. 3-4, 2012, pp. 445-456. doi: 10.1016/j.ijsolstr.2011.10.00210.1016/j.ijsolstr.2011.10.002 ↗

26. Wu, Y. F., and Zhou, Y. W., “Unified Strength Model Based on Hoek-Brown Failure Criterion for Circular and Square Concrete Columns Confined by FRP,” Journal of Composites for Construction, ASCE, V. 14, No. 2, 2010, pp. 175-184. doi: 10.1061/(ASCE)CC.1943-5614.000006210.1061/(ASCE)CC.1943-5614.0000062 ↗

27. Tijani, I. A.; Wu, Y. F.; and Lim, C. W., “Aggregate Size Effects and General Static Loading Response on Mechanical Behavior of Passively Confined Concrete,” Construction and Building Materials, V. 205, 2019, pp. 61-72. doi: 10.1016/j.conbuildmat.2019.01.16410.1016/j.conbuildmat.2019.01.164 ↗

28. Lam, L., and Teng, J. G., “Design-Oriented Stress-Strain Model for FRP-Confined Concrete in Rectangular Columns,” Journal of Reinforced Plastics and Composites, V. 22, No. 13, 2003, pp. 1149-1186. doi: 10.1177/073168440303542910.1177/0731684403035429 ↗

29. Cao, Y. G.; Wu, Y. F.; and Li, X. Q., “Unified Model for Evaluating Ultimate Strain of FRP Confined Concrete Based on Energy Method,” Construction and Building Materials, V. 103, 2016, pp. 23-35. doi: 10.1016/j.conbuildmat.2015.11.04210.1016/j.conbuildmat.2015.11.042 ↗

30. Wu, Y. F., and Cao, Y. G., “Energy Balance Method for Modeling Ultimate Strain of Confined Concrete,” ACI Structural Journal, V. 114, No. 2, Mar.-Apr. 2017, pp. 373-381. doi: 10.14359/5168942910.14359/51689429 ↗

31. Tijani, I. A.; Wu, Y. F.; and Lim, C. W., “Energy Balance Method for Modeling Ultimate Strain of Fiber-Reinforced Polymer-Repaired Concrete,” Structural Concrete, V. 21, No. 2, 2020, pp. 804-820. doi: 10.1002/suco.20190026010.1002/suco.201900260 ↗