Natural rutile-derived titanate nanofibers prepared by direct hydrothermal processing

Long titanate nanofibers (typically 10–500 μm in length and 20–50 nm in diameter) were successfully prepared in high yield by the direct hydrothermal processing using natural rutile as a starting material. Fourier transform infrared spectroscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, electron diffraction, and x-ray diffraction demonstrated that the as-synthesized nanofibers presumably consisted of sodium hydrogen trititanate [(Na,H)₂Ti₃O_7,e.g., Na_0.4H_1.6Ti₃O₇] including some hexatitanate-type defects [(Na,H)₂Ti₆O₁₃]. A partial topotactic condensation model explained their nanostructure well. Although the as-synthesized fibers are defective, they can be cured by a post-heat-treatment in air. The direct hydrothermal treatment for natural rutile will be a promising low-cost process for one-dimensional nanomaterials, which can act not only as a reaction step but also as a purification step.