Tension Development Length of Large-Diameter Bars for Severe Cyclic Loading
Source abstract
Abstract
First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Response to Dynamic Loads · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Joint ACI-ASCE Committee 408, “Bond and Development of Straight Reinforcing Bars in Tension (ACI 408R-03),” American Concrete Institute, Farmington Hills, MI, 2003, 49 pp.
2. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary,” American Concrete Institute, Farmington Hills, MI, 2011, 503 pp.
3. American Association of State Highway and Transportation Officials (AASHTO), “LRFD Bridge Design Specifications,” Washington, DC, 2012.
4. Ichinose, T.; Kanayama, Y.; Inoue, Y.; and Bolander, J. E. Jr., “Size Effect on Bond Strength of Deformed Bars,” Construction and Building Materials, V. 18, No. 7, 2004, pp. 549-558. doi: 10.1016/j.conbuildmat.2004.03.01410.1016/j.conbuildmat.2004.03.014 ↗
5. Plizzari, G., and Metelli, G., “Experimental Study on the Bond Behavior of Large Bars,” Technical Report, University of Brescia, Department of Civil Engineering, Architecture and Environment, Brescia, Italy, 2009.
6. Murcia-Delso, J.; Stavridis, A.; and Shing, P. B., “Bond Strength and Cyclic Bond Deterioration of Large-Diameter Bars,” ACI Structural Journal, V. 110, No. 4, July-Aug. 2013, pp. 659-669.10.14359/51685751 ↗
7. Steuck, K. P.; Eberhard, M. O.; and Stanton, J. F., “Anchorage of Large-Diameter Reinforcing Bars in Ducts,” ACI Structural Journal, V. 106, No. 4, July-Aug. 2009, pp. 506-513.10.14359/56616 ↗
8. Shima, H.; Chou, L.; and Okamura, H., “Bond Characteristics in Post-Yield Range of Deformed Bars,” Proceedings of JSCE, V. 6, No. 387, Feb. 1987, pp. 113-124.10.2208/jscej.1987.378_213 ↗
9. Viwathanatepa, S.; Popov, E. P.; and Bertero, V. V., “Effects of Generalized Loadings on Bond of Reinforcing Bars Embedded in Confined Concrete Blocks,” Report No. UCB/EERC-79/22, Earthquake Engineering Research Center, University of California, Berkeley, Berkeley, CA, 1979.
10. Eligehausen, R.; Popov, E. P.; and Bertero, V. V., “Local Bond Stress-Slip Relationships of Deformed Bars under Generalized Excitations,” UCB/EERC-83/23, Earthquake Engineering Research Center, University of California, Berkeley, Berkeley, CA, 1983.
11. American Association of State Highway and Transportation Officials (AASHTO), Guide Specifications for LRFD Seismic Bridge Design, second edition, Washington, DC, 2011.
12. Murcia-Delso, J.; Shing. P. B.; Stavridis, A.; and Liu, Y., “Required Embedment Length of Column Reinforcement Extended into Type II Shafts,” Report No. SSRP-13/05, Structural Systems Research Project, University of California, San Diego, Department of Structural Engineering, La Jolla, CA, 2013.
13. Murcia-Delso, J., and Shing. P. B., “Bond-Slip Model for Detailed Finite Element Analysis of Reinforced Concrete Structures,” Journal of Structural Engineering, ASCE, V. 141, No. 4, 2015.10.1061/(ASCE)ST.1943-541X.0001070 ↗
14. ASTM A706/A706M-09b, “Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement,” ASTM International, West Conshohocken, PA, 2009, 6 pp.
15. Simulia, ABAQUS V. 6.10, Dassault Systemes Simulia Corp., Providence, RI, 2010.
16. Lubliner, J.; Oliver, J.; Oller, S.; and Oñate, E., “A Plastic-Damage Model for Concrete,” International Journal of Solids and Structures, V. 25, No. 3, 1989, pp. 229-326. doi: 10.1016/0020-7683(89)90050-410.1016/0020-7683(89)90050-4 ↗
17. Lee, J., and Fenves, G. L., “Plastic-Damage Model for Cyclic Loading of Concrete Structures,” Journal of Engineering Mechanics, ASCE, V. 124, No. 8, 1998, pp. 892-900. doi: 10.1061/(ASCE)0733-9399(1998)124:8(892)10.1061/(ASCE)0733-9399(1998)124:8(892) ↗
18. Unanwa, C., and Mahan, M., “Statistical Analysis of Concrete Compressive Strengths for California Highway Bridges,” Journal of Performance of Constructed Facilities, V. 28, 2012, pp. 157-167.10.1061/(ASCE)CF.1943-5509.0000404 ↗
19. Nowak, A. S., and Szerszen, M. M., “Calibration of Design Code for Buildings (ACI 318): Part 1—Statistical Models for Resistance,” ACI Structural Journal, V. 100, No. 3, May-June 2003, pp. 377-382.10.14359/12613 ↗
20. Darwin, D.; Idun, E. K.; Zuo, J.; and Tholen, M. L., “Reliability-Based Strength Reduction Factor for Bond,” ACI Structural Journal, V. 95, No. 4, July-Aug. 1998, pp. 434-442.10.14359/559 ↗
21. Liu, P.; Lin, H.; and Der Kiureghian, A., “CALREL User Manual,” UCB/SEEM-89/18, University of California, Berkeley, Department of Civil Engineering, Berkeley, CA, 1989.
22. Ellingwood, B.; Galambos, T. V.; MacGregor, J. G.; and Cornell, C. A., “Development of a Probability Based Load Criterion for American National Standard A58,” National Bureau of Standards Special Publication 577, Washington, DC, 1980.10.6028/NBS.SP.577 ↗