Strut Strength and Failure in Full-Scale Concrete Deep Beams
Source abstract
Abstract
First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. ACI Committee 215, 1992, “Considerations for Design of Concrete Structures Subjected to Fatigue Loading (ACI 215R-92),” American Concrete Institute, Farmington Hills, MI, 24 pp.
2. ACI Committee 318, 2014, “Building Code Requirements for Structural Concrete and Commentary (ACI 318-14),” American Concrete Institute, Farmington Hills, MI, 519 pp.
3. American Association of State Highways and Transportation Officials (AASHTO), 1989, Guide Specifications for Design and Construction of Segmental Concrete Bridges, first edition, Washington, DC.
4. American Association of State Highways and Transportation Officials (AASHTO), 2017, AASHTO LRFD Bridge Design Specification, eighth edition, Washington, DC.
5. Breen, J. E.; Burdet, O.; Roberts, C.; Sanders, D.; and Wollmann, G., 1994, “Anchorage Zone Reinforcement for Post-Tensioned Concrete Girders,” National Cooperative Highway Research Program Report No. 356, Washington, DC.
6. Brown, M. D., and Bayrak, O., 2006, “Minimum Transverse Reinforcement for Bottle-Shaped Struts,” ACI Structural Journal, V. 103, No. 6, Nov.-Dec., pp. 813-821.10.14359/18233 ↗
7. Brown, M. D.; Sankovich, C.; Bayrak, O.; and Jirsa, J. O., 2006, “Behavior and Efficiency of Bottle-Shaped Struts,” ACI Structural Journal, V. 103, No. 3, May-June, pp. 348-354.10.14359/15312 ↗
8. CEB-FIP, 2010, “CEP-FIP Model Code,” Comité Euro-International du Béton, International Federation for Structural Concrete (fib), Lausanne, Switzerland.
9. CEN, 2004, “Eurocode 2: Design of Concrete Structures,” European Committee for Standardization, Brussels, Belgium, 229 pp.
10. Cook, W. D., and Mitchell, D., 1988, “Studies of Disturbed Regions near Discontinuities in Reinforced Concrete Members,” ACI Structural Journal, V. 85, No. 2, Mar.-Apr., pp. 206-216.10.14359/2772 ↗
11. CSA A23.3-14, 1994, “Design of Concrete Structures for Buildings with Explanatory Notes,” Canadian Standards Association, Rexdale, ON, Canada.
12. FIP Recommendations, 1999, “FIP-Commission 3: Practical Design,” SETO, London, UK, Sept., http://www.fib-international.org.
13. Klein, G.; Rezaei, N.; Garber, D.; and Tureyen, K., 2019, “Shear in Discontinuity Regions,” Concrete International, V. 41, No. 5, May.
14. Mörsch, E., 1909, Concrete-Steel Construction, E. P. Goodrich, translation McGraw-Hill, New York, 1909, 368 pp.
15. Paskova, T., and Meyer, C., 1997, “Low-Cycle Fatigue of Plain and Fiber-Reinforced Concrete,” ACI Materials Journal, V. 94, No. 4, July-Aug., pp. 273-286.10.14359/309 ↗
16. Pujol, S.; Rautenberg, J.; and Sozen, M., 2011, “Compressive Strength of Concrete in Nonprismatic Elements,” Concrete International, V. 33, No. 9, Sept., pp. 42.
17. Rezaei, N.; Klein, G.; and Carber, D., 2019, “Effect of Development and Geometry on Behavior of Concrete Deep Beams,” ACI Structural Journal, V. 116, No. 3, May, pp. 171-182. doi:10.143591/5171330810.14359/51713308 ↗
18. Ritter, W., 1899, “Die Bauweise Hennebique (Construction Techniques of Hennebique),” Schweizerische Bauzeitung, V. 33, No. 7.
19. Sahoo, D. K.; Singh, B.; and Bhargava, P., 2009, “An Appraisal of the ACI Strut Efficiency Factors,” Magazine of Concrete Research, V. 61, No. 6, pp. 445-456. doi: August.10.1680/macr.2008.0011210.1680/macr.2008.00112 ↗
20. Sahoo, D. K.; Singh, B.; and Bhargava, P., 2010, “Effect of Inclination on the Strength of Struts,” Magazine of Concrete Research, V. 63, No. 2, pp. 111-117. doi: 10.1680/macr.9.0017810.1680/macr.9.00178 ↗
21. Schlaich, J., and Schäfer, K., 1991, “Design and Detailing of Structural Concrete Using Strut-And-Tie Models,” Structural Engineering, V. 69, No. 6, pp. 113-125.
22. Schlaich, J.; Schäfer, K.; and Jennewein, M., 1987, “Special Report: Toward a Consistent Design of Structural Concrete,” Prestressed Concrete Institute Journal, V. 32, No. 3, May-June, pp. 74-150.10.15554/pcij.05011987.74.150 ↗
23. Su, R., and Looi, D., 2016, “Revisiting Unreinforced Strut Efficiency Factor,” ACI Structural Journal, V. 113, No. 2, Mar.-Apr., pp. 301-312.10.14359/51688062 ↗
24. Van den Hoogen, M.; Hordijk, D.; Blom, K.; and Vergoossen, R., 2015, “The Increasing Bearing Capacity while Removing Concrete from Reinforced Beams,” Concrete—Innovation and Design, fib Symposium, Copenhagen, Denmark, May.