Accurate measurement of thin film mechanical properties using nanoindentation
Source abstract
Abstract
Abstract For decades, nanoindentation has been used for measuring mechanical properties of films with the widely used assumption that if the indentation depth does not exceed 10% of the film thickness, the substrate influence is negligible. The 10% rule was originally deduced for much thicker metallic films on steel substrates and involved only the hardness measurement. Thus, the boundaries of usability for measuring thin film elastic modulus may differ. Two known material systems of Mo and MoTa thin films on Si substrates are examined with nanoindentation and numerical modeling to show the limitations in measuring elastic moduli. An assessment of the hardness and elastic modulus as a function of contact depth and accurate modeling of the film/substrate deformation confirms the 10% rule for hardness measurements. For elastic modulus, the indentation depths should be much smaller. Results provide a recommended testing protocol for accurate assessment of thin film elastic modulus using nanoindentation. Graphical abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Adhesion, Friction, and Surface Interactions · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. W.D. Nix, Mechanical properties of thin films. Metall. Trans. A. 20A, 2217–2245 (1989). https://doi.org/10.1146/annurev.ms.20.080190.00213510.1146/annurev.ms.20.080190.002135 ↗
2. H. Bückle, Use of hardness test to determine other material properties, in The Science of Hardness Testing and Its Research Applications. ed. by J.H. Westbrook, H. Conrad (American Society for Metals, Metals Park, OH, 1973), pp. 453–494
3. D. Tabor, Hardness of Metals (Clarendon Press, Oxford, 1951)
4. J.R. Cahoon, W.H. Broughton, A.R. Kutzak, The determination of yield strength from hardness measurements. Metall. Trans. 2, 1979–1983 (1971). https://doi.org/10.1007/BF0291343310.1007/BF02913433 ↗
5. Z.H. Xu, D. Rowcliffe, Finite element analysis of substrate effects on indentation behaviour of thin films. Thin Solid Films 447–448, 399–405 (2004). https://doi.org/10.1016/S0040-6090(03)01071-X10.1016/S0040-6090(03)01071-X ↗
6. S.J. Bull, Microstructure and indentation response of TiN coatings: The effect of measurement method. Thin Solid Films 688, 137452 (2019). https://doi.org/10.1016/j.tsf.2019.13745210.1016/j.tsf.2019.137452 ↗
7. A.M. Korsunsky, M.R. McGurk, S.J. Bull, T.F. Page, On the hardness of coated systems. Surf. Coatings Technol. 99, 171–183 (1998). https://doi.org/10.1016/S0257-8972(97)00522-710.1016/S0257-8972(97)00522-7 ↗
8. P.J. Burnett, D.S. Rickerby, The relationship between hardness and scratch adhesion. Thin Solid Films 154, 403–416 (1987)10.1016/0040-6090(87)90382-8 ↗
9. T.Y. Tsui, G.M. Pharr, Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates. J. Mater. Res. 14, 292–301 (1999). https://doi.org/10.1557/JMR.1999.004210.1557/JMR.1999.0042 ↗
10. R. Saha, W.D. Nix, Effects of the substrate on the determination of thin film mechanical properties by nanoindentation. Acta Mater. 50, 23–38 (2002). https://doi.org/10.1016/S1359-6454(01)00328-710.1016/S1359-6454(01)00328-7 ↗
11. J. Chen, S.J. Bull, On the relationship between plastic zone radius and maximum depth during nanoindentation. Surf. Coat. Technol. 201, 4289–4293 (2006). https://doi.org/10.1016/j.surfcoat.2006.08.09910.1016/j.surfcoat.2006.08.099 ↗
12. H. Li, J.J. Vlassak, Determining the elastic modulus and hardness of an ultra-thin film on a substrate using nanoindentation. J. Mater. Res. 24, 1114–1126 (2009)10.1557/jmr.2009.0144 ↗
13. R. Saha, W.D. Nix, Soft films on hard substrates — nanoindentation of tungsten films on sapphire substrates. Mater. Sci. Eng. A. 321, 898–901 (2001)10.1016/S0921-5093(01)01076-0 ↗
14. D.L. Joslin, W.C. Oliver, A new method for analyzing data from continuous depth-sensing microindentation tests. J. Mater. Res. 5, 123–126 (1990). https://doi.org/10.1557/JMR.1990.012310.1557/JMR.1990.0123 ↗
15. W.D. Nix, Elastic and plastic properties of thin films on substrates: nanoindentation techniques. Mater. Sci. Eng. A. A234–236, 37–44 (1997). https://doi.org/10.1016/s0921-5093(97)00176-710.1016/s0921-5093(97)00176-7 ↗
16. W.D. Nix, Metallic thin films: stresses and mechanical properties. Met. Film. Electron. Opt. Magn. Appl. Struct. Process. Prop. (2014). https://doi.org/10.1533/9780857096296.2.35310.1533/9780857096296.2.353 ↗
17. I.N. Sneddon, The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile. Int. J. Eng. Sci. 3, 47–57 (1965). https://doi.org/10.1016/0020-7225(65)90019-410.1016/0020-7225(65)90019-4 ↗
18. R. Saha, Z. Xue, Y. Huang, W.D. Nix, Indentation of a soft metal film on a hard substrate: strain gradient hardening effects. J. Mech. Phys. Solids. 49, 1997–2014 (2001). https://doi.org/10.1016/S0022-5096(01)00035-710.1016/S0022-5096(01)00035-7 ↗
19. H.Y. Yu, S.C. Sanday, B.B. Rath, The effect of substrate on the elastic properties of films determined by the indentation test—axisymmetric Boussinesq problem. J. Mech. Phys. Solids 38, 745–764 (1990). https://doi.org/10.1016/0022-5096(90)90038-610.1016/0022-5096(90)90038-6 ↗
20. A.C. Fischer-Cripps, Nanoindentation, 2nd edn. (Springer, New York, 2004)10.1007/978-1-4757-5943-3 ↗
21. S.M. Han, R. Saha, W.D. Nix, Determining hardness of thin films in elastically mismatched film-on-substrate systems using nanoindentation. Acta Mater. 54, 1571–1581 (2006). https://doi.org/10.1016/j.actamat.2005.11.02610.1016/j.actamat.2005.11.026 ↗
22. M.J. Cordill, N.R. Moody, W.W. Gerberich, Effects of dynamic indentation on the mechanical response of materials. J. Mater. Res. 23, 1604–1613 (2008). https://doi.org/10.1557/JMR.2008.020510.1557/JMR.2008.0205 ↗
23. K.W. Siu, A.H.W. Ngan, Oscillation-induced softening in copper and molybdenum from nano- to micro-length scales. Mater. Sci. Eng. A. 572, 56–64 (2013). https://doi.org/10.1016/j.msea.2013.02.03710.1016/j.msea.2013.02.037 ↗
24. K. Durst, B. Backes, O. Franke, M. Göken, Indentation size effect in metallic materials: modeling strength from pop-in to macroscopic hardness using geometrically necessary dislocations. Acta Mater. 54, 2547–2555 (2006). https://doi.org/10.1016/j.actamat.2006.01.03610.1016/j.actamat.2006.01.036 ↗
25. A. Leitner, V. Maier-Kiener, D. Kiener, Dynamic nanoindentation testing: is there an influence on a material’s hardness? Mater. Res. Lett. 5, 486–493 (2017). https://doi.org/10.1080/21663831.2017.133138410.1080/21663831.2017.1331384 ↗
26. A.K. Nair, M.J. Cordill, D. Farkas, W.W. Gerberich, Nanoindentation of thin films: simulations and experiments. J. Mater. Res. 24, 1135–1141 (2009). https://doi.org/10.1557/jmr.2009.013610.1557/jmr.2009.0136 ↗
27. M.J. Cordill, M.S. Lund, J. Parker, C. Leighton, A.K. Nair, D. Farkas, N.R. Moody, W.W. Gerberich, The Nano-Jackhammer effect in probing near-surface mechanical properties. Int. J. Plasticity 25, 2045–2058 (2009). https://doi.org/10.1016/j.ijplas.2008.12.01510.1016/j.ijplas.2008.12.015 ↗
28. F. Lofaj, D. Németh, The effects of tip sharpness and coating thickness on nanoindentation measurements in hard coatings on softer substrates by FEM. Thin Solid Films 644, 173–181 (2017). https://doi.org/10.1016/j.tsf.2017.09.05110.1016/j.tsf.2017.09.051 ↗
29. N.I. Tymiak, D.E. Kramer, D.F. Bahr, T.J. Wyrobek, W.W. Gerberich, Plastic strain and strain gradients at very small indentation depths. Acta Mater. 49, 1021–1034 (2001). https://doi.org/10.1016/S1359-6454(00)00378-510.1016/S1359-6454(00)00378-5 ↗
30. D. Kramer, H. Huang, M. Kriese, J. Robach, J. Nelson, A. Wright, D. Bahr, W.W. Gerberich, Yield strength predictions from the plastic zone around nanocontacts. Acta Mater. 47, 333–343 (1998). https://doi.org/10.1016/S1359-6454(98)00301-210.1016/S1359-6454(98)00301-2 ↗
31. R.K. Abu Al-Rub, G.Z. Voyiadjis, Analytical and experimental determination of the material intrinsic length scale of strain gradient plasticity theory from micro- and nano-indentation experiments. Int. J. Plasticity 20, 1139–1182 (2004). https://doi.org/10.1016/j.ijplas.2003.10.00710.1016/j.ijplas.2003.10.007 ↗
32. K. Durst, B. Backes, M. Göken, Indentation size effect in metallic materials: correcting for the size of the plastic zone. Scr. Mater. 52, 1093–1097 (2005). https://doi.org/10.1016/j.scriptamat.2005.02.00910.1016/j.scriptamat.2005.02.009 ↗
33. G. Feng, W.D. Nix, Indentation size effect in MgO. Scr. Mater. 51, 599–603 (2004). https://doi.org/10.1016/j.scriptamat.2004.05.03410.1016/j.scriptamat.2004.05.034 ↗
34. W.D. Nix, H.J. Gao, Indentation size effects in crystalline materials: a law for strain gradient plasticity. J. Mech. Phys. Solids 46, 411–425 (1998). https://doi.org/10.1016/s0022-5096(97)00086-010.1016/s0022-5096(97)00086-0 ↗
35. M.J. Cordill, D.M. Hallman, N.R. Moody, D.P. Adams, W.W. Gerberich, Thickness effects on the plasticity of gold films. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 38A, 2154–2159 (2007). https://doi.org/10.1007/s11661-006-9011-710.1007/s11661-006-9011-7 ↗
36. R.D. Mindlin, A review of the photoelastic method of stress analysis. I. J. Appl. Phys. 10, 222–241 (1939). https://doi.org/10.1063/1.170730010.1063/1.1707300 ↗
37. J.F. Orr, J.B. Finlay, Photoelastic stress analysis, in Optical Measurement Methods in Biomechanics (Springer, Boston, 1997). https://doi.org/10.1007/978-0-585-35228-2_1.10.1007/978-0-585-35228-2_1 ↗
38. J.S. Hawong, J.H. Nam, K.H. Kim, O.S. Kwon, G. Kwon, S.H. Park, A study on the development of photoelastic experimental hybrid method for colour isochromatics (I). J. Mech. Sci. Technol. 24, 1279–1287 (2010). https://doi.org/10.1007/s12206-010-0337-010.1007/s12206-010-0337-0 ↗
39. C. Niezrecki, P. Avitabile, C. Warren, P. Pingle, M. Helfrick, A review of digital image correlation applied to structural dynamics. AIP Conf. Proc. 1253, 219–232 (2010). https://doi.org/10.1063/1.345546110.1063/1.3455461 ↗
40. A. Weidner, H. Biermann, Review on strain localization phenomena studied by high-resolution digital image correlation. Adv. Eng. Mater. (2021). https://doi.org/10.1002/adem.20200140910.1002/adem.202001409 ↗
41. R. Janeliukstis, X. Chen, Review of digital image correlation application to large-scale composite structure testing. Compos. Struct. 271, 114143 (2021). https://doi.org/10.1016/j.compstruct.2021.11414310.1016/j.compstruct.2021.114143 ↗
42. A. Zeilinger, J. Todt, C. Krywka, M. Müller, W. Ecker, B. Sartory, M. Meindlhumer, M. Stefenelli, R. Daniel, C. Mitterer, J. Keckes, In-situ observation of cross-sectional microstructural changes and stress distributions in fracturing TiN thin film during nanoindentation. Sci. Rep. 6, 22670 (2016). https://doi.org/10.1038/srep2267010.1038/srep22670 ↗
43. A.K. Bhattacharya, W.D. Nix, Finite element simulation of indentation experiments. Int. J. Solids Struct. 24, 881–891 (1988). https://doi.org/10.1016/0020-7683(88)90039-X10.1016/0020-7683(88)90039-X ↗
44. A. Nasto, A. Ajdari, A. Lazarus, A. Vaziri, P.M. Reis, Localization of deformation in thin shells under indentation. Soft Matter 9, 6796–6803 (2013). https://doi.org/10.1039/c3sm50279a10.1039/c3sm50279a ↗
45. C. Shi, H. Zhao, H. Huang, L. Xu, L. Ren, M. Bai, J. Li, X. Hu, Effects of indenter tilt on nanoindentation results of fused silica: an investigation by finite element analysis. Mater. Trans. 54, 958–963 (2013). https://doi.org/10.2320/matertrans.M201240010.2320/matertrans.M2012400 ↗
46. S. Syngellakis, H. Habbab, B.G. Mellor, Finite element simulation of spherical indentation experiments. Int. J. Comput. Methods Exp. Meas. 6, 749–763 (2018). https://doi.org/10.2495/CMEM-V6-N4-749-76310.2495/CMEM-V6-N4-749-763 ↗
47. C. Gao, H. Proudhon, M. Liu, Three-dimensional finite element analysis of shallow indentation of rough strain-hardening surface. Friction. 7, 587–602 (2019). https://doi.org/10.1007/s40544-018-0245-310.1007/s40544-018-0245-3 ↗
48. A.K. Bhattacharya, W.D. Nix, Analysis of elastic and plastic deformation associated with indentation testing of thin films on substrates. Int. J. Solids Struct. 24, 1287–1298 (1988)10.1016/0020-7683(88)90091-1 ↗
49. J. Chen, S.J. Bull, Loading rate effects on the fracture behaviour of solar control coatings during nanoindentation. Thin Solid Films 516, 128–135 (2007). https://doi.org/10.1016/j.tsf.2007.08.13110.1016/j.tsf.2007.08.131 ↗
50. Y. Sun, T. Bell, S. Zheng, Finite element analysis of the critical ratio of coating thickness to indentation depth for coating property measurements by nanoindentation. Thin Solid Films 258, 198–204 (1995). https://doi.org/10.1016/0040-6090(94)06357-510.1016/0040-6090(94)06357-5 ↗
51. N. Panich, P. Wangyao, T. Chomtohsuwan, S. Yong, Finite element analysis of the critical ratio of coating thickness to indentation depth of soft coating on a harder substrate by nanoindentation. ScienceAsia 32, 411–416 (2006). https://doi.org/10.2306/scienceasia513-1874.2006.32.41110.2306/scienceasia513-1874.2006.32.411 ↗
52. E. Felder, S. Roy, E. Darque-Ceretti, Characterization of the adhesion of thin film by cross-sectional nanoindentation. Analysis of the substrate edge chipping and the film delamination. Compt. Rend. Mec. 339, 443–457 (2011). https://doi.org/10.1016/j.crme.2011.05.00310.1016/j.crme.2011.05.003 ↗
53. W.C. Oliver, G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564–1583 (1992). https://doi.org/10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
54. J.J. Hall, Electronic effects in the elastic constants of n-type silicon. Phys. Rev. 161, 756–761 (1967). https://doi.org/10.1103/PhysRev.161.75610.1103/PhysRev.161.756 ↗
55. E.J. Boyd, D. Uttamchandani, Measurement of the anisotropy of Young’s modulus in single-crystal silicon. J. Microelectromech. Syst. 21, 243–249 (2012). https://doi.org/10.1109/JMEMS.2011.217441510.1109/JMEMS.2011.2174415 ↗
56. L. Zhang, R. Barrett, P. Cloetens, C. Detlefs, M. Sanchez Del Rio, Anisotropic elasticity of silicon and its application to the modelling of X-ray optics. J. Synchrotron Radiat. 21, 507–517 (2014). https://doi.org/10.1107/S160057751400496210.1107/S1600577514004962 ↗
57. S. Chen, L. Liu, T. Wang, Investigation of the mechanical properties of thin films by nanoindentation, considering the effects of thickness and different coating-substrate combinations. Surf. Coat. Technol. 191, 25–32 (2005). https://doi.org/10.1016/j.surfcoat.2004.03.03710.1016/j.surfcoat.2004.03.037 ↗
58. W.D. Callister, D.G. Rethwisch, Materials Science and Engineering: An Introduction, 8th edn. (Wiley, New York, 2010)
59. P. Kreiml, M. Rausch, V.L. Terziyska, H. Köstenbauer, J. Winkler, C. Mitterer, M.J. Cordill, Balancing the electro-mechanical and interfacial performance of Mo-based alloy films. Materialia (2020). https://doi.org/10.1016/j.mtla.2020.10077410.1016/j.mtla.2020.100774 ↗
60. A.M. Hofer, G. Mori, A. Fian, J. Winkler, C. Mitterer, Improvement of oxidation and corrosion resistance of Mo thin films by alloying with Ta. Thin Solid Films 599, 1–6 (2016). https://doi.org/10.1016/j.tsf.2015.12.05210.1016/j.tsf.2015.12.052 ↗
61. C. Oses, E. Gossett, D. Hicks, F. Rose, M.J. Mehl, E. Perim, I. Takeuchi, S. Sanvito, M. Scheffler, Y. Lederer, O. Levy, C. Toher, S. Curtarolo, AFLOW-CHULL: cloud-oriented platform for autonomous phase stability analysis. J. Chem. Inf. Model. 58, 2477–2490 (2018). https://doi.org/10.1021/ACS.JCIM.8B00393/SUPPL_FILE/CI8B00393_SI_006.PDF10.1021/ACS.JCIM.8B00393/SUPPL_FILE/CI8B00393_SI_006.PDF ↗
62. C. Saringer, M. Tkadletz, M. Kratzer, M.J. Cordill, Direct determination of the area function for nanoindentation experiments. J. Mater. Res. (2021). https://doi.org/10.1557/s43578-021-00113-910.1557/s43578-021-00113-9 ↗
63. J.L. Bucaille, S. Stauss, E. Felder, J. Michler, Determination of plastic properties of metals by instrumented indentation using different sharp indenters. Acta Mater. 51, 1663–1678 (2003). https://doi.org/10.1016/S1359-6454(02)00568-210.1016/S1359-6454(02)00568-2 ↗
64. X. Huang, A.A. Pelegri, Mechanical characterization of thin film materials with nanoindentation measurements and FE analysis. J. Compos. Mater. 40, 1393–1407 (2006). https://doi.org/10.1177/002199830505972810.1177/0021998305059728 ↗
65. W.C. Guo, G. Rauchs, W.H. Zhang, J.P. Ponthot, Influence of friction in material characterization in microindentation measurement. J. Comput. Appl. Math. 234, 2183–2192 (2010). https://doi.org/10.1016/j.cam.2009.08.07210.1016/j.cam.2009.08.072 ↗