Experimental Investigation of Thin-Wall Synthetic Fiber-Reinforced Concrete Pipes

1. AASHTO, 2011, “Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm (12- to 60-in.) Diameter,” M 294-11, Washington, DC.

2. Al Rikabi, F.; Sargand, S.; and Kurdziel, J., 2019, “Evaluation of Synthetic Fiber Reinforced Concrete Pipe Performance Using Three-Edge Bearing Test,” Journal of Testing and Evaluation, V. 47, No. 2, p. 20170369 doi: 10.1520/JTE2017036910.1520/JTE20170369 ↗

3. Altoubat, S.; Yazdanbakhsh, A.; and Rieder, K. A., 2009, “Shear Behavior of Macrosynthetic Fiber-Reinforced Concrete Beams without Stirrups,” ACI Materials Journal, V. 106, No. 4, July-Aug., pp. 381-389.10.14359/56659 ↗

4. ASCE, 2001, “Standard Practice for Direct Design of Precast Concrete Pipe Using Standard Installations (SIDD) (ASCE 15-98),” American Society of Civil Engineers, Reston, VA, 40 pp.

5. ASTM C76-15a, 2015, “Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe,” ASTM International, West Conshohocken, PA, 11 pp.

6. ASTM C497-15, 2015, “Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile,” ASTM International, West Conshohocken, PA, 13 pp.

7. ASTM F2648/2648M-13, 2013, “Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications,” ASTM International, West Conshohocken, PA, 8 pp.

8. Balaguru, P., and Shah, S., 1992, Fiber-Reinforced Cement Composites, McGraw-Hill Inc., New York.

9. Banthia, N., and Dubey, A., 2000, “Measurement of Flexural Toughness of Fiber-Reinforced Concrete Using a Novel Technique—Part 2: Performance of Various Composites,” ACI Materials Journal, V. 97, No. 1, Jan.-Feb., pp. 3-11.10.14359/799 ↗

10. Çavdar, A., 2012, “A Study on the Effects of High Temperature on Mechanical Properties of Fiber Reinforced Cementitious Composites,” Composites. Part B, Engineering, V. 43, No. 5, pp. 2452-2463. doi: 10.1016/j.compositesb.2011.10.00510.1016/j.compositesb.2011.10.005 ↗

11. Çavdar, A., 2013, “The Effects of High Temperature on Mechanical Properties of Cementitious Composites Reinforced with Polymeric Fibers,” Composites. Part B, Engineering, V. 45, No. 1, pp. 78-88. doi: 10.1016/j.compositesb.2012.09.03310.1016/j.compositesb.2012.09.033 ↗

12. Çavdar, A., 2014, “Investigation of Freeze-Thaw Effects on Mechanical Properties of Fiber Reinforced Cement Mortars,” Composites. Part B, Engineering, V. 58, pp. 463-472. doi: 10.1016/j.compositesb.2013.11.01310.1016/j.compositesb.2013.11.013 ↗

13. de la Fuente, A.; Escariz, R. C.; de Figueiredo, A. D.; and Aguado, A., 2013, “Design of Macro-Synthetic Fibre Reinforced Concrete Pipes,” Construction and Building Materials, V. 43, pp. 523-532. doi: 10.1016/j.conbuildmat.2013.02.03610.1016/j.conbuildmat.2013.02.036 ↗

14. Gabriel, L. H., 2011, Corrugated Polyethylene Pipe Design Manual and Installation Guide, Plastic Pipe Institute, Irving, TX.

15. Heger, F. J., 1963, “Structural Behavior of Circular Reinforced Concrete Pipe—Development of Theory,” ACI Journal Proceedings, V. 60, No. 11, Nov., pp. 1567-1614.10.14359/7905 ↗

16. Heger, F. J., and Gillespie, J. W., 1967, “Design of Circular Concrete Pipe Reinforced with Welded Deformed Wire Fabric,” No. HS-000 708, sponsored by Committee on Culverts and Culvert Pipe.

17. Heger, F. J., and McGrath, T. J., 1983, “Radial Tension Strength of Pipe and Other Curved Flexural Members,” ACI Journal Proceedings, V. 80, No. 1, Jan., pp. 33-39.10.14359/10460 ↗

18. Kani, G. N. J., 1964, “The Riddle of Shear Failure and its Solution,” ACI Journal Proceedings, V. 61, No. 4, Apr., pp. 441-468.10.14359/7791 ↗

19. Kuder, K. G., and Shah, S. P., 2010, “Processing of High-Performance Fiber-Reinforced Cement-Based Composites,” Construction and Building Materials, V. 24, No. 2, pp. 181-186. doi: 10.1016/j.conbuildmat.2007.06.01810.1016/j.conbuildmat.2007.06.018 ↗

20. Li, V. C., and Maalej, M., 1996, “Toughening in Cement-Based Composites. Part II: Fiber Reinforced Cementitious Composites,” Cement and Concrete Composites, V. 18, No. 4, pp. 239-249. doi: 10.1016/0958-9465(95)00029-110.1016/0958-9465(95)00029-1 ↗

21. Mobasher, B., and Li, C. Y., 1996, “Mechanical Properties of Hybrid Cement-Based Composites,” ACI Materials Journal, V. 93, No. 3, May-June, pp. 284-292.10.14359/9813 ↗

22. Park, Y.; Abolmaali, A.; Attiogbe, E.; and Lee, S. H., 2014, “Time-Dependent Behavior of Synthetic Fiber-Reinforced Concrete Pipes under Long-Term Sustained Loading,” Transportation Research Record: Journal of the Transportation Research Board, V. 2407, No. 1, pp. 71-79. doi: 10.3141/2407-0710.3141/2407-07 ↗

23. Park, Y.; Abolmaali, A.; Beakley, J.; and Attiogbe, E., 2015, “Thin-Walled Flexible Concrete Pipes with Synthetic Fibers and Reduced Traditional Steel Cage,” Engineering Structures, V. 100, pp. 731-741. doi: 10.1016/j.engstruct.2015.06.04910.1016/j.engstruct.2015.06.049 ↗

24. Peyvandi, A.; Soroushian, P.; and Jahangirnejad, S., 2013, “Enhancement of the Structural Efficiency and Performance of Concrete Pipes through Fiber Reinforcement,” Construction and Building Materials, V. 45, pp. 36-44.10.1016/j.conbuildmat.2013.03.084 ↗

25. Peyvandi, A.; Soroushian, P.; and Jahangirnejad, S., 2014, “Structural Design Methodologies for Concrete Pipes with Steel and Synthetic Fiber Reinforcement,” ACI Structural Journal, V. 111, No. 1, Jan.-Feb., pp. 83-92.10.14359/51686432 ↗

26. Wilson, A., and Abolmaali, A., 2014, “Performance of Synthetic Fiber-Reinforced Concrete Pipes,” Journal of Pipeline Systems Engineering and Practice, V. 5, No. 3, Aug., pp. 1-10. doi: 10.1061/(ASCE)PS.1949-1204.000016610.1061/(ASCE)PS.1949-1204.0000166 ↗

27. Zollo, R. F., 1997, “Fiber-Reinforced Concrete: An Overview after 30 Years of Development,” Cement and Concrete Composites, V. 19, No. 2, pp. 107-122. doi: 10.1016/S0958-9465(96)00046-710.1016/S0958-9465(96)00046-7 ↗