Externally Bonded Reinforcement on Grooves Technique in Circular Reinforced Columns Strengthened with Longitudinal Carbon Fiber-Reinforced Polymer under Eccentric Loading
Source abstract
Abstract
First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Bisby, L., and Ranger, M., “Axial-Flexural Interaction in Circular FRP- Confined Reinforced Concrete Columns,” Construction and Building Materials, V. 24, No. 9, 2010, pp. 1672-1681. doi: 10.1016/j.conbuildmat.2010.02.02410.1016/j.conbuildmat.2010.02.024 ↗
2. Hadi, M. N. S., “Behaviour of Eccentric Loading of FRP Confined Fibre Steel Reinforced Concrete Columns,” Construction and Building Materials, V. 23, No. 2, 2009, pp. 1102-1108. doi: 10.1016/j.conbuildmat.2008.05.02410.1016/j.conbuildmat.2008.05.024 ↗
3. Maaddawy, T., “Strengthening of Eccentrically Loaded Reinforced Concrete Columns with Fiber-Reinforced Polymer Wrapping System: Experimental Investigation and Analytical Modeling,” Journal of Composites for Construction, ASCE, V. 13, No. 1, 2009, pp. 13-24. doi: 10.1061/(ASCE)1090-0268(2009)13:1(13)10.1061/(ASCE)1090-0268(2009)13:1(13) ↗
4. Elsanadedy, H. M.; Al-Salloum, Y. A.; Alsayed, S. H.; and Iqbal, R. A., “Experimental and Numerical Investigation of Size Effects in FRP-Wrapped Concrete Columns,” Construction and Building Materials, V. 29, 2012, pp. 56-72. doi: 10.1016/j.conbuildmat.2011.10.02510.1016/j.conbuildmat.2011.10.025 ↗
5. Saljoughian, A., and Mostofinejad, D., “Corner Strip-Batten Technique for FRP-Confinement of Square RC Columns under Eccentric Loading,” Journal of Composites for Construction, ASCE, V. 20, No. 3, 2016, p. 04015077. doi: 10.1061/(ASCE)CC.1943-5614.000064410.1061/(ASCE)CC.1943-5614.0000644 ↗
6. Saljoughian, A., and Mostofinejad, D., “Axial-Flexural Interaction in Square RC Columns Confined by Intermittent CFRP Wraps,” Composites. Part B, Engineering, V. 89, 2016, pp. 85-95. doi: 10.1016/j.compositesb.2015.10.04710.1016/j.compositesb.2015.10.047 ↗
7. Li, G.; Maricherla, D.; Singh, K.; Pang, S.-S.; and John, M., “Effect of Fiber Orientation on the Structural Behavior of FRP Wrapped Concrete Cylinders,” Composite Structures, V. 74, No. 4, 2006, pp. 475-483. doi: 10.1016/j.compstruct.2005.05.00110.1016/j.compstruct.2005.05.001 ↗
8. Hadi, M. N. S., “Behaviour of FRP Strengthened Concrete Columns under Eccentric Compression Loading,” Composite Structures, V. 77, No. 1, 2007, pp. 92-96. doi: 10.1016/j.compstruct.2005.06.00710.1016/j.compstruct.2005.06.007 ↗
9. Tan, K., “Strength Enhancement of Rectangular Reinforced Concrete Columns Using Fiber-Reinforced Polymer,” Journal of Composites for Construction, ASCE, V. 6, No. 3, 2002, pp. 175-183. doi: 10.1061/(ASCE)1090-0268(2002)6:3(175)10.1061/(ASCE)1090-0268(2002)6:3(175) ↗
10. Issa, M.; Alrousan, R.; and Issa, M., “Experimental and Parametric Study of Circular Short Columns Confined with CFRP Composites,” Journal of Composites for Construction, ASCE, V. 13, No. 2, 2009, pp. 135-147. doi: 10.1061/(ASCE)1090-0268(2009)13:2(135)10.1061/(ASCE)1090-0268(2009)13:2(135) ↗
11. Siddiqui, N. A.; Alsayed, S. H.; Al-Salloum, Y. A.; Iqbal, R. A.; and Abbas, H., “Experimental Investigation of Slender Circular RC Columns Strengthened with FRP Composites,” Construction and Building Materials, V. 69, 2014, pp. 323-334. doi: 10.1016/j.conbuildmat.2014.07.05310.1016/j.conbuildmat.2014.07.053 ↗
12. Fitzwilliam, J., and Bisby, L., “Slenderness Effects on Circular CFRP Confined Reinforced Concrete Columns,” Journal of Composites for Construction, ASCE, V. 14, No. 3, 2010, pp. 280-288. doi: 10.1061/(ASCE)CC.1943-5614.000007310.1061/(ASCE)CC.1943-5614.0000073 ↗
13. ACI Committee 440, “Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-08),” American Concrete Institute, Farmington Hills, MI, 2008, 76 pp.
14. Japan Society of Civil Engineers, “Recommendations for Upgrading of Concrete Structures with Use of Continuous Fiber Sheets,” Concrete Engineering Series, JSCE, 2001, 88 pp.
15. The Concrete Society, “Design Guidance for Strengthening Concrete Structures Using Fiber Composite Materials,” Technical Report No. 55, London, UK, 2004, 102 pp.
16. Federation International du Beton, “Externally Bonded FRP Reinforcement for RC Structures,” Bulletin 14, fib, Lausanne, Switzerland, 2001, 130 pp.
17. Wu, W.-P., “Thermomechanical Properties of Fiber Reinforced Plastic (FRP) Bars,” dissertation, West Virginia University, Morgantown, WV, 1992, 292 pp.
18. Ehsani, M., “Glass-Fiber Reinforcing Bars,” Alternative Materials for the Reinforcement and Prestressing of Concrete, JL Clarke, Blackie Academic & Professional, London, UK, 1993, pp. 34-54.
19. Mostofinejad, D., and Mahmoudabadi, E., “Grooving as Alternative Method of Surface Preparation to Postpone Debonding of FRP Laminates in Concrete Beams,” Journal of Composites for Construction, ASCE, V. 14, No. 6, 2010, pp. 804-811. doi: 10.1061/(ASCE)CC.1943-5614.000011710.1061/(ASCE)CC.1943-5614.0000117 ↗
20. Mostofinejad, D., and Shameli, M., “Performance of EBROG Method under Multilayer FRP Sheets for Flexural Strengthening of Concrete Beams,” Procedia Engineering, V. 14, 2011, pp. 3176-3182. doi: 10.1016/j.proeng.2011.07.40110.1016/j.proeng.2011.07.401 ↗
21. Mostofinejad, D., and Shameli, S. M., “Externally Bonded Reinforcement in Grooves (EBRIG) Technique to Postpone Debonding of FRP Sheets in Strengthened Concrete Beams,” Construction and Building Materials, V. 38, 2013, pp. 751-758. doi: 10.1016/j.conbuildmat.2012.09.03010.1016/j.conbuildmat.2012.09.030 ↗
22. Mostofinejad, D., and Khozaei, K., “Effect of GM Patterns on Ductility and Debonding Control of FRP Sheets in RC Strengthened Beams,” Construction and Building Materials, V. 93, 2015, pp. 110-120. doi: 10.1016/j.conbuildmat.2015.05.06210.1016/j.conbuildmat.2015.05.062 ↗
23. Mostofinejad, D., and Moshiri, N., “Compressive Strength of CFRP Composites Used for Strengthening of Rc Columns: Comparative Evaluation of Ebr and Grooving Methods,” Journal of Composites for Construction, ASCE, V. 19, No. 5, 2015, 04014079. doi: 10.1061/(ASCE)CC.1943-5614.000054510.1061/(ASCE)CC.1943-5614.0000545 ↗
24. Mostofinejad, D., and Torabian, A., “Experimental Study of Circular RC Columns Strengthened with Longitudinal CFRP Composites under Eccentric Loading: Comparative Evaluation of EBR and EBROG Methods,” Journal of Composites for Construction, ASCE, V. 20, No. 2, 2016, 04015055 doi: 10.1061/(ASCE)CC.1943-5614.000061810.1061/(ASCE)CC.1943-5614.0000618 ↗
25. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, MI, 2014, 519 pp.
26. Mander, J.; Priestley, M.; and Park, R., “Theoretical Stress-Strain Model for Confined Concrete,” Journal of Structural Engineering, ASCE, V. 114, No. 8, 1988, pp. 1804-1826. doi: 10.1061/(ASCE)0733-9445(1988)114:8(1804)10.1061/(ASCE)0733-9445(1988)114:8(1804) ↗
27. Lam, L., and Teng, J. G., “Design-Oriented Stress-Strain Model for FRP-Confined Concrete,” Construction and Building Materials, V. 17, No. 6-7, 2003, pp. 471-489. doi: 10.1016/S0950-0618(03)00045-X10.1016/S0950-0618(03)00045-X ↗
28. Jiang, T., and Teng, J., “Analysis-Oriented Stress-Strain Models for FRP-Confined Concrete,” Engineering Structures, V. 29, No. 11, 2007, pp. 2968-2986. doi: 10.1016/j.engstruct.2007.01.01010.1016/j.engstruct.2007.01.010 ↗
29. Teng, J.; Jiang, T.; Lam, L.; and Luo, Y., “Refinement of a Design-Oriented Stress–Strain Model for FRP-Confined Concrete,” Journal of Composites for Construction, ASCE, V. 13, No. 4, 2009, pp. 269-278. doi: 10.1061/(ASCE)CC.1943-5614.000001210.1061/(ASCE)CC.1943-5614.0000012 ↗
30. Rousakis, T. C.; Rakitzis, T. D.; and Karabinis, A. I., “Design-Oriented Strength Model for FRP-Confined Concrete Members,” Journal of Composites for Construction, ASCE, V. 16, No. 6, 2012, pp. 615-625. doi: 10.1061/(ASCE)CC.1943-5614.000029510.1061/(ASCE)CC.1943-5614.0000295 ↗
31. Baji, H.; Ronagh, H. R.; and Li, C. Q., “Probabilistic Design Models for Ultimate Strength and Strain of FRP-Confined Concrete,” Journal of Composites for Construction, ASCE, V. 20, No. 6, 2016, 04016051 doi: 10.1061/(ASCE)CC.1943-5614.000070410.1061/(ASCE)CC.1943-5614.0000704 ↗
32. Richart, F. E.; Brandtzaeg, A.; and Brown, R. L., “A Study of the Failure of Concrete under Combined Compressive Stresses,” University of Illinois Bulletin, 1928, 104 pp.
33. Balmer, G. G., “Shearing Strength of Concrete under High Triaxial Stress, Computation of Mohr’s Envelope as a Curve,” U.S. Department of the Interior, Bureau of Reclamation, Denver, CO, 1949, 26 pp.